• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2010년도 추계학술대회 논문집
• /
• pp.681-682
• /
• 2010

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1990년도 한국자동제어학술회의논문집(국내학술편); KOEX, Seoul; 26-27 Oct. 1990
• /
• pp.181-185
• /
• 1990

In design of the plastic injection mold, most of drawings are composed of basic entities. It is very easy to produce many kinds of drawings by Group Technology. Group Technology is a technique In which part similarities are used to classify parts into part families according to either geometric shape and size or processing requirements. Almost data for the mold are decided during the assembly design. A system which shows a good interfaces between the design stage and producing part exploding Is developed using AutoCAD system and data conversion technique.

• Elastomers and Composites
• /
• 제55권2호
• /
• pp.128-136
• /
• 2020

The hydrolysis mechanisms as well as the hydrolysis measurement technique and its practical applications in material manufacturing fields are revised. This chapter, Part 1, elaborates the theoretical aspects of the hydrolysis mechanism. Acid-catalyzed and base-catalyzed hydrolysis mechanisms are reviewed. The quantitative analysis method based on the SIM technique using py-GC-MS is reviewed. Examples of hydrolysis of alkoxysilane in elastomer composites currently used in the industry and hydrolysis of amine in plastic composites are shown. Moreover, Part 2 discusses the mechanical property changes in elastomer and plastic composites after hydrolysis.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2004년도 춘계학술대회 논문집
• /
• pp.409-412
• /
• 2004

Microstructures and mechanical properties of microalloyed cold forging steel and cold forged prototype automobile part are characterized. The work hardening according to the increase of plastic strain plays a major role in increasing the tensile strength of microalloyed cold forging steel during cold forming. On the other hand, inhomogeneous distribution of plastic strain causes variations in microstructure and mechanical properties. The relation between inhomogeneous distribution of plastic strain and variations in microstructure and mechanical properties is discussed. The variation of mechanical property in cold forged automobile part is analyzed using quantitative evaluation of plastic strain from finite element method.

• Advances in materials Research
• /
• 제2권2호
• /
• pp.111-118
• /
• 2013

The changes of plastic plateau in the stress-strain curves of annealed polypropylene (PP) films during stretching under room temperature were followed and the corresponding melting properties and microstructure were characterized by differential scanning calorimetry (DSC) and scanning electron microscopy (SEM). It was found that during stretching the plastic plateau disappeared progressively with the increase of drawing ratio. At the same time, the endotherm plateau in DSC curves also disappeared progressively. The presence of the plastic plateau was attributed to the stretching of unstable crystalline part which was formed by tie chains around initial row-nucleated lamellae structure during annealing. During stretching, the unstable part was stretched and converted to bridges connecting separated lamellae. There was direct relationship between the disappearance of plastic plateau and pore formation.

• Advances in materials Research
• /
• 제3권2호
• /
• pp.91-103
• /
• 2014

A study that demonstrates how to investigate the molded part quality and the consistency of injection process based on the rheological concept is proposed. It is important for plastic material whose melt viscosity is variable with respect to the processing condition. The formulations to couple the melt viscosity with injection pressure and fill time are derived first. Taking calculations of the measured pressure and the time by using these formulations, the melt viscosity in injection process can be determined on machine. As the relation between the injection speed and the melt viscosity is constructed, the influences of the setting parameter of injection machine on the molded part quality can be investigated through evaluating the state of the melt viscosity. In addition, a pressure sensor bushing (PSB) designed with a quick installation feature is also provided and validated. The results show that a higher injection speed improves the tensile strength of the molded part but also the consistency of the molded part quality. This work provides an alternative to evaluate the molding quality scientifically.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2003년도 춘계학술대회 논문집
• /
• pp.1614-1617
• /
• 2003

Actuator being used in the ship supplies engine with air. When actuator is out of order, engine is not operated. This out of order is due to fracture of piston or rotating of spindle in the case of plastic deformation of parallel part in locking plate. For this reason, locking plate must be guaranteed enough strength. Therefor in this paper, the effects of changes with the clearance of between spindle and parallel part, the contact height of parallel part and spindle, the side circle diameter of parallel part and the width of locking plate in the designated torque are investigated. The result of this investigation shows the relation between locking plate and spindle.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2004년도 추계학술대회 논문집
• /
• pp.308-311
• /
• 2004

Nowadays, plastic industry has needed to produce parts that require high precision and quality. To make a high precision and quality part, before injection molding, plastic material is investigated about their properties such as shrinkage, warpage, etc. In this study, experiments were conducted with PA6(polyamid) to figure out shrinkage behavior according to three type aspect ratio of samples. The injection speed that affects on shear rate, molecular orientation within plastic part was determined as main variable of experiment. As a result of experimental study, part shrinkage had a tendency to be decreased by increasing injection speed and aspect ratio of samples.

• 한국기계가공학회지
• /
• 제3권3호
• /
• pp.46-51
• /
• 2004

Nowadays, plastic industry has needed to produce parts that require high precision and quality. To make a high precision and quality part, before injection molding, plastic material in investigated about their properties such as shrinkage, warpage, etc. In this study, experiments were conducted with PP(polypiopylene) to figure out shrinkage behavior according to three type aspect ratio of samples. The injection speed that affects on shear late, molecular orientation within plastic part was determined as main variable of experiment. As a result of experimental study, part shrinkage had a tendency to be decreased by increasing injection speed and aspect ratio of samples.

• 수산해양기술연구
• /
• 제41권4호
• /
• pp.306-315
• /
• 2005

The distribution and composition of marine floating debris were recorded from a training ship 'Kyeongyang' of Gangwon Provincial University at May 19-29, 2004 and Aug.24-31, 2004. The sampled area is the middle part of East Sea of Korea(the coast of Gangwondo and region of Ulleung island and Tokdo), divided into 27 unit segments on survey areas. Debris fabrication materials were categorized with 6 items using the following; styrofoam, paper & cardboard, net & rope, vinyl & plastic, floating metal & glass, man-made or natural wood. From the investigation on May,2004, total numbers of marine floating debris in the middle part of the East Sea of Korea was 996 individuals. The No. 1 and No. 2 unit segment located at south-west region of Ulleung Island showed higher density than others. The styrofoam and vinyl & plastic accounted for 72.8% of all debris fabrication materials. From the investigation on August, 2004, total numbers of marine floating debris in the coast of the Gangwondo of Korea was 2,473 individuals. The No. 13 and No. 14 unit segment located at the vicinity of Samcheok showed higher density than others. The styrofoam and vinyl & plastic amounted to 76.1%. In the coast of the Gangwondo, the vinyl & plastic showed the highest density of 6 items were 41.3% and 68.0% on May and August, respectively. The total numbers of marine floating debris on May and August were 3,399 individuals. Vinyl & plastic accounted for 59.4%(2,019 ind.) among all debris, next styrofoam 15.8%(537 ind.) and wood 11.2%(379 ind.).