• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.22 no.3_1spc
• /
• pp.573-579
• /
• 2013

Once-through helically coiled steam generator tubes subjected to external pressure are of interest because of their application to advanced small- and medium-sized integral reactors, in which a primary coolant with a relatively higher pressure flows outside the tubes, while secondary water with a relatively lower pressure flows inside the tubes. Another notable point is that the values of the mean radius to thickness ratio of these steam generator tubes are very small, which means that a thick-walled cylinder is employed for these steam generator tubes. In the present paper, the maximum allowable pressure of helically coiled and thick-walled steam generator tubes with through-wall cracks under external pressure is investigated based on a detailed nonlinear three-dimensional finite element analysis. In terms of the crack orientation, either circumferential or axial through-wall cracks are considered. In particular, in order to quantify the effect of the crack location on the maximum external pressure, these cracks are assumed to be located in the intrados, extrados, and flank of helically coiled cylinders. Moreover, an evaluation is also made of how the maximum external pressure is affected by the ovality, which might be inherently induced during the tube coiling process used to fabricate the helically coiled steam generator tubes.

• Journal of Applied Biological Chemistry
• /
• v.63 no.2
• /
• pp.169-174
• /
• 2020

The objective of this study was to investigate the effects of a hypodermic injectable solution comprised of an LPM LB meso solution containing Melissa officinalis L. leaf extract (LPM) on the lipogenesis in the 3T3-L1 cells line. The lipid accumulation measured by oil red o staining in the 3T3-L1 adipocytes treated with LPM, which was reduced in a dose dependent manner and showed 91.7 to 62.9% compared to control group. Its effectiveness with a 50% solution was significantly higher than the hydroxycitric acid (positive control) treatment without showing cell cytotoxicity. In a quantitative real-time PCR, it was demonstrated that the LPM treatment appeared to upregulate the mRNA expression of the adipogenesis-related genes, which included the peroxisome proliferator-activated receptor gamma (50% concentration) while down-regulating the CCAAT-enhancer binding protein alpha (50% concentration) and the sterol regulatory element-binding protein 1c (10, 25, and 50% concentrations). The results from the current study suggest that the LPM could be useful biomaterials that can inhibit obesity in the 3T3-L1 cells, which could possibly be by regulating the specific adipogenic gene transcription factors.

• Journal of Welding and Joining
• /
• v.28 no.4
• /
• pp.26-32
• /
• 2010

The purpose of this study is to evaluate the residual stresses at the multi-pass FCA weldment using the finite element analysis (FEA). In order to do it, an H-type specimen was selected as a test specimen. The variable used was in-plane restraint intensity. The temperature distribution at the multi-pass FCA butt weldment was evaluated in accordance with the relevant guidance recommended by the KWJS. The effective conductivity for the weld metal corresponding to each welding pass was introduced to control the maximum temperature below the vaporization temperature of weld metal. The heat flux caused by welding arc was assumed to be applied to the weld metal corresponding to welding pass. With heat transfer analysis results, the distribution of transverse residual stresses was evaluated using the thermo-mechanical analysis and compared with the measured results by XRD and uniaxial strain gage. In thermo-mechanical analysis, the plastic strain resetting at the temperature above melting temperature of $1450^{\circ}C$ was considered and the weld metal and base metal was assumed to be bilinear kinematics hardening continuum. According to the comparison between FEA and experiment, transverse residual stresses at the multi-pass FCA butt weldment obtained by FEA had a good agreement with the measured results, regardless of in-plane rigidity. Based on the results, it was concluded that thermo-mechanical FE analysis based on temperature distribution calculated in accordance with the KWJS’s guidance could be used as a tool to predict the distribution of residual stress of the multi-pass FCA butt weldment.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.32 no.5
• /
• pp.741-752
• /
• 2008

The purposes of this study are to review the status of dress material in the contemporary fashion design by examining the intertextuality of many materials other than textiles used in the contemporary fashion and to show that the development of new fashion materials is a factor for designing competitiveness. The results of this study are summarized as follows: First, foods and natural objects are used as fashion materials to reveal natural beauty, and at the same time new formative elements are expressed in combinations of life and fashion. Second, common paper and luxurious jewelry are presented as a formative element symbolic of an aspect of the contemporary society or embodied in elaborate handicraft techniques. Those materials boost the luxuriousness of costume and create a strong futuristic image according to how they are expressed. Third, plastics available for a variety of objects in different shapes and colors offer such formative features that could be shaped with textiles, as high-end technology is introduced to fashion. Fourth, metallic materials have added freedom to design formality due to their qualities of convergence and displacement and by the introduction of brand-new technology, suggesting a new future for the fashion industry. Fifth, using a variety of anti-fashion materials including semiconductor chips, mirrors, vinyl, wires, and rubber makes a change in the existing points of view regarding the formality of things and helps create a special aesthetic effect in a visual respect to develop a strong intertextuality of materials.

• Journal of Sensor Science and Technology
• /
• v.11 no.3
• /
• pp.125-131
• /
• 2002

Respiratory air flow rate is necessarily measured for the pulmonary function evaluation. The currently used devices are exposed to the problems of measurement reliability and cross-patient infection. The present study introduced a new technique which converted the bidirectional air flow rate into averaged dynamic pressure based on the famous Bernoulli's energy conservation principle. Single use plastic sensing element was assembled within the flow tube(mouth piece) made of paper, which was named "functional single use flow tube". Experiment demonstrated only ${\pm}1.5%$ relative error in the standard 3L volume measurement procedure well within the error limit suggested by the American Thoracic Society(ATS). Disposable use design completely eliminated cross-patient infection. The present device is best useful and safe for clinical respiratory air flow measurement such as spirometry.

• Journal of the Korean GEO-environmental Society
• /
• v.7 no.6
• /
• pp.75-88
• /
• 2006

This paper evaluates the feasibility of use of high-strength steel for soil-metal corrugated steel structures. Two specifications, the AASHTO(2004) and the CHBDC(2000), were compared and the scientific background of equations for the buckling stability in those specifications were investigated to figure out the governing factors for buckling strength of structures. Numerous finite element analyses for round-pipe type of soil-metal corrugated steel structures were carried out with considering the elastic-plastic relationship of a material and the geometrical non-linearity, as well as the various design variables, such as span length, depths of soil cover, section properties, tensile strength and backfill conditions. Buckling strength equation of the CHBDC(2000) is still valid and conservative for both normal and high-strength steel soil-metal corrugated steel structures, and the buckling strength increases with the use of hight-strengths steel.

• Journal of the Korean Society for Railway
• /
• v.11 no.3
• /
• pp.257-262
• /
• 2008

Design and analysis of road subgrade system, which is exposed to repetitive loading condition, uses resilient modulus. The behavior of railway subgrade system will not be quite different from that of road system. Following this phenomenological feature of the subgrade system, this paper introduces the implementation of the resilient modulus based constitutive model on a commercial finite element software. The implementation of the resilient modulus models such as K-${\theta}$ and Uzan on a FE program has been conducted previously. These model assumes that the material state reaches to the nonlinear elastic condition and with further application of repetitive loads, the response of material is completed in elastic condition. According to the recent test results performed on cohesive subgrade soils, however, permanent deformation occurs with repetitive loads. With aids of previously suggested models the permanent deformation cannot be modeled. To overcome such limitation a plastic potential derived from the test results and simple failure criterion based constitutive model is developed. The comparison between the analysis and test results shows a good correlation.

• Computational Structural Engineering
• /
• v.2 no.4
• /
• pp.59-67
• /
• 1989

Effect of joints which pre-exist in the rock mass on the behavior of underground structures is studied. A finite element program is developed using a constitutive mode for rock masses exhibiting nonlinear anisotropic behavior. The initial loading scheme combined with reduced region of analysis is employed to minimize the problem size. A circular tunnel within rock mass is analyzed and the results are compared with those of elasto-plastic analysis to verify that the program is reasonable. The effect of joint direction is also analyzed in regard to stress relaxation, displacement, and deformation shape. It is concluded that the joint direction has significant influence on the nonlinear behavior of rock masses such that the vicinity of tunnel perpendicular to the direction of the joints is stressed to slide. It is also observed that the circular shape deforms to an elliptical shape with a major axis in the joint direction.

• Korean Journal of Materials Research
• /
• v.22 no.11
• /
• pp.615-619
• /
• 2012

Recently, ultrafine grained (ufg, typically 100 > d > 500 nm) Ti-Fe eutectic materials have been highlighted due to their extraordinarily high strength and good abrasion resistance compared to conventional coarse grained (cg, d > $1{\mu}m$) materials. However, these materials exhibit limited plastic strain and toughness during room temperature deformation due to highly localized shear strain. Several approaches have been extensively studied to overcome such drawbacks, such as the addition of minor elements (Sn, Nb, Co, etc.). In this paper, we have investigated the influence of the addition of Gd and Y contents (0.3-1.0 at.%) into the binary Ti-Fe eutectic alloy. Gd and Y are chosen due to their immiscibility with Ti. Microstructural investigation reveals that the Gd phase forms in the eutectic matrix and the Gd phase size increases with increasing Gd content. The improvement of the mechanical properties is possibly correlated to the precipitation hardening. On the other hand, in the case of Ti-Fe-Y alloys, with increasing Y contents, primary phases form and lamellar spacing increases compared to the case of the eutectic alloy. Investigation of the mechanical properties reveals that the plasticity of the Ti-Fe-Y alloys is gradually improved, without a reduction of strength. These results suggest that the enhancement of the mechanical properties is closely related to the formation of the primary phase.

• Elastomers and Composites
• /
• v.44 no.4
• /
• pp.384-390
• /
• 2009

Roll-to-roll forming process is one of important metal processing technology because the process is simple and economical. These days, with these merits, roll-to-roll forming process is tried to be employed in manufacturing the circuit board, barrier ribs and solar cell plate. The solar cell plate may have millions of patterns, and the analysis of forming considering all the patterns is impossible due to the computational costs. In this study, analyses are carried out for various numbers of patterns and the results are compared. It is shown that the analyses results with four row patterns and twelve row patterns are same. So, it is considered that the analysis can be carried out for only four rows of pattern for the design of incremental roll-to-roll forming process. Also formability is analysed for various number of mesh, protrusion shapes and forming temperature.