• Journal of the Korea Concrete Institute
• /
• v.19 no.2
• /
• pp.233-239
• /
• 2007

The main objective of this study was to evaluate the effect of recycled PET fiber made from waste PET bottle on the control of plastic shrinkage cracking of cement based composites. PET is blown as a plastic material and used in a variety products such as a beverage bottle. However, waste PET bottles are thrown after the usage, raising huge problems in terms of the environment. Thus, the research on the method to recycle the PET bottles indicates important aspects in environment and economy. The method to recycle waste PET bottles as a reinforcing fiber for cement based composites is one of effective methods in terms of the recycle of waste PET bottles. In this research, the effect of recycled PET fiber geometry and length on the control of plastic shrinkage was examined through thin slab tests. A test program was carried out to understand the influence of fiber geometry, length and fiber volume fraction. Three type of recycled PET fibers including straight, twist crimped and embossed type. Three volume fraction and two fiber length were investigated for each of the three fiber geometry. Test results indicated that recycled PET fibers are effective in controlling plastic shrinkage cracking in cement based composites. In respect to effect of length of fiber, longer fiber was observed to have efficient cracking controlling with low volume fraction in same fiber geometry while shorter fiber controled plastic shrinkage cracking efficiently as addition rate increase. Also, embossed type fibers were more effective in controlling plastic shrinkage cracking than other geometry fiber at low volume fraction. But, for high volume fraction, straight type fibers were most effective in plastic shrinkage cracking controlling in cement based composites.

• Elastomers and Composites
• /
• v.56 no.3
• /
• pp.164-171
• /
• 2021

Due to the problem of environmental pollution by plastics, it is necessary to decrease their consumption. In the case of PET bottles, it is essential to reduce the thickness of the bottle for the reduction of plastic used. For manufacturing PET bottles with reduced thickness, it is a prerequisite to design a preform with reduced thickness and study its molding capability. In this study, the injection molding capability was investigated after reducing the body thickness of the preform to 15% and 20%, respectively, for the two preform models currently in use. Injection molding analysis was performed on the existing models and on the models for reduced weight, under the molding conditions of the existing models. Using the computed results, temperature distribution, pressure distribution, deformation and clamping force were compared. Based on the analysis, the injection conditions of the preform model with less thickness were discussed.

• Journal of Oral Medicine and Pain
• /
• v.1 no.1
• /
• pp.8-13
• /
• 1973

The authors had studied the oral environmental changes by salivary salivary pH, amount, periodontal Index in patient with active pulmonary tuberculosis patients. Among the subjects, The experimental group was consisted of 100 patients (50 males and 50 females) of 20-29 years and 100 persons of control group (50 males and 50 females) of 20-29 years. The measurement of salivary amount was performed with wide mouthed plastic (2 Inches) bottle for avoidance of Ionization of SiO2 by using of glass bottle and salivary pH was checked by pH meter 27 radiometer Copenhagen. The results are as follows : 1. The slivary pH does not appear to be characteristic of tuberculous paticents. 2. The obtained salivary amount indicated no significant to the tuberculous patients as compared to the obtained supposedely wealthg individuals. 3. The Russel Index wasfound higher and there had found more periodontal involvement(3 times than normal) in the experimental group.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2006.05a
• /
• pp.123-126
• /
• 2006

In this study, bottom-up type powder processing and top-down type SPD (severe plastic deformation) approaches were combined in order to achieve full density of carbon nanotube (CNT)/metal matrix composites with superior mechanical properties by improved particle bonding and least grain growth, which were considered as a bottle neck of the bottom-up method using the conventional powder metallurgy of compaction and sintering. ECAP (equal channel angular pressing), the most promising method in SPD, was used for the CNT/Cu powder consolidation. The powder ECAP processing with 1, 2, 4 and 8 route C passes was conducted at room temperature.

• Journal of Mushroom
• /
• v.10 no.2
• /
• pp.57-62
• /
• 2012

The plastic culture bottle cap types and accumulated concentration of carbon dioxide, media humidity in the process of medium culture, chitin content and yield were observed in Pleurotus ostreatus 850ml bottle in Iksan, Jeollabuk-do, Korea, during 2011. The concentration of carbon dioxide in the process of medium culture was the highest after 8~9 days cultivation irrespective of cap sizes and types. The accumulated concentration of carbon dioxide in size cap of 29~41mm was 6.5~4.0% in the upper-under perforation hole of cap and 9.0~6.5% in the under perforation hole of cap. The upper-under 23~33mm perforation hole and under 29mm perforation hole of caps in the 850ml bottle were best condition for cultivation of mushroom and increased fruit body, 15.8~21.2% and 20%, respectively. However, the upper-under & under 41mm perforation hole of fruit body were decreased 60.7% and 23.6%, respectively. Also it was weak, lose vitality and the lower of biologically activity substance because the upper medium humidity was too dry.

• Journal of Mushroom
• /
• v.10 no.2
• /
• pp.68-73
• /
• 2012

The plastic culture bottle cap types and accumulated concentration of carbon dioxide, media humidity in the process of medium culture and yield were observed in Pleurotus ostreatus 1,100ml bottle in Iksan, Jeollabuk-do, Korea, during 2011. The concentration of carbon dioxide in the process of medium culture was the highest after 6~11days cultivation irrespective of cap sizes and types. The upper-under 19~38mm perforation hole and under 26~47mm perforation hole of caps in the 1,100ml bottle were best condition for cultivation of mushroom and increased fruit body, 11.4~23.8% and 6.5~17.9%, respectively. However, the upper-under 33mm perforation hole of fruit body were decreased 23.8%. Also it was weak, lose vitality and the lower of biologically activity substance because the upper medium humidity was too dry.

• Design & Manufacturing
• /
• v.18 no.2
• /
• pp.17-22
• /
• 2024

Lightweight of plastic containers is becoming an important issue due to increasing environmental legislation and consumer awareness. In this study, the CAE analysis was conducted to optimize the shape of a 500 ml lightweight square polyethylene terephthalate(PET) bottle. First, the linear buckling alaysis using the finite element method was performed to analyze the correlation between the primary geometric parameters of the bottle and the buckling critical load. Then, the optimal geometry parameters were derived, and the actual buckling load was predicted by non-linear buckling simulation. The validity of the simulation results was verified by top-loading tests of PET bottles molded with the optimized geometry. The elastic modulus and tensile yield strength of PET through tensile tests were measured to improve the accuracy of the simulation. As a result of the tensile tests, the modulus of elasticity of PET increased from 2,900 MPa to 4,275 MPa, and the tensile yield strength increased from 52.4 MPa to 88.1 MPa. Finally the buckling load of the optimized PET bottle was found to be approximately 236 N, which is very similar to the simulation precition of 238 N. This study shows the feasibility and accuracy of the CAE analysis approach for the lightweight design of PET bottles, and will provide useful guidelines for the design of PET bottles.

• Archives of Plastic Surgery
• /
• v.35 no.5
• /
• pp.626-629
• /
• 2008

Purpose: We investigate the possibility of vessel preservation with glycerol and evaluate the potential of preserved gastroepiploic artery as a tool for the microsurgical practice. Methods: In 5 early gastric cancer patients, IRB(No. C-0603-040-170), we gained gastroepiploic artery specimens(5 segments, about 10 cm) after gastrectomy. Each segment was rinsed in a normal saline and subsequently placed in a bottle, containing 50 mL anhydrous glycerol (87%). The bottles were refrigerated at $4^{\circ}C$, the longest preservation time being 5 months. Results: At first glance, no fragmentation was detected and the surface of vessel seemed mild sclerotic. In histological examination, vascular structures remained intact though preservation with glycerol led to a mild atrophy of the smooth muscle in the tunica media. Especially, we found out the elastic fibers and endothelial lining of the intima were preserved until 5 months. Adequate status for using microsurgical practice was also maintained and leakage test was performed successfully with gentian violet ink. Conclusion: Based on the results obtained in this study, the gastroepiploic artery preservation with glycerol as a training model for microvascular anastomosis is a technically very simple procedure and useful for the novice microsurgeon.

• Proceedings of the Korean Society for Quality Management Conference
• /
• 1998.11a
• /
• pp.667-672
• /
• 1998

This Paper is to describe about new concept of the hidden cost of quality and through two cases plastic bottle manufacturing to explain how to find out it. Generally, the hidden quality cost does not show in the accounting record, but some time can find in the data of cost accounting or management accounting. How to combine between the hidden quality cost and the accounting method is discussed in the conclusion.

• Proceedings of the Korean Institute of Industrial Safety Conference
• /
• 2003.10a
• /
• pp.176-179
• /
• 2003

범용 엔지니어링 플라스틱(Engineering plastic)인 PET(Polyethylene terephthalate)수지는 투명성, 강도특성, 내열특성, 기체차단성 등 물성이 우수하여 합성섬유, 이축연신 film, 식음료용 bottle 등의 용도로 널리 사용되는 적용범위가 매우 넓은 고분자 소재이다. 그러나 폐기된 PET 수지를 물질재활용(material recycling) 방법으로 재가공할 경우 수지 자체가 갖는 가수분해(hydrolysis)와 열분해(thermal degradation) 특성으로 인해 가공성 및 기계적 특성이 현저히 저하되는 단점이 있다.(중략)