• 한국터널지하공간학회 논문집
• /
• 제18권6호
• /
• pp.557-568
• /
• 2016

심부 터널을 굴착하는 동안 발생할 수 있는 현상인 압출은 큰 소성 변형과 터널 축소 그리고 지보 붕괴를 일으킬 수 있다. 따라서 압출 현상의 발생 가능성과 변형량, 응력 변화의 정량적 예측은 합리적인 시공 방안을 수립하기 위하여 매우 중요하다. 본 연구는 변형률 연화 구성모델을 이용한 3차원 수치해석을 수행하여 압출 거동을 합리적으로 모사하고 변형량과 소성 범위 등을 정량적으로 예측하고자 하였다. 다양한 범위의 응력 조건과 강도 조건의 42가지 경우에 대한 해석을 수행한 결과 최대접선응력과 암반강도비가 소성 변형량과 소성 깊이를 합리적으로 예측할 수 있었으며 이들의 관계식을 제안하였다.

• 한국강구조학회 논문집
• /
• 제23권3호
• /
• pp.305-316
• /
• 2011

건축물이 크고 높아질수록 고강도 강재의 필요성이 부각 되었고 이러한 요구에 따라 강도와 항복비가 개선된 성능을 가진 강재들이 개발되고 있다. 본 연구에서는 고강도강재를 사용한 웨트볼트 접합방식을 가지는 모멘트접합부의 거동을 ABAQUS를 사용한 유한요소해석을 통하여 파악하였다. 해석모델은 이미 수행되어진 실험체를 대상으로 하였으며 파괴시까지의 반복하중을 해석모델에 가력하였다. 유한요소해석결과 실제실험으로는 얻기 힘든 여러 가지의 반응지수들을 구하였다. 이러한 지수들은 응력과 변형에 관계한 값으로 소성회전각이 0.003rad, 0.03rad 그리고 파괴시까지 3단계에서 구하였다. 특히 파괴단계에서 일정한 값을 가지는 변형지수는 충분한 소성거동을 하는 접합부의 강재에 요구되어지는 기계적 성질로 제시하였다.

• Nuclear Engineering and Technology
• /
• 제44권7호
• /
• pp.791-798
• /
• 2012

Since standardized fracture test specimens cannot be easily extracted from in-service components, several alternative fracture toughness test methods have been proposed to characterize the deformation and fracture resistance of materials. One of the more promising alternatives is the local approach employing the SP(Small Punch) testing technique. However, this process has several limitations such as a lack of anisotropic yield potential and tediousness in the damage parameter calibration process. The present paper investigates estimation of ductile fracture resistance(J-R) curve by FE(Finite Element) analyses using an anisotropic damage model and enhanced calibration procedure. In this context, specific tensile tests to quantify plastic strain ratios were carried out and SP test data were obtained from the previous research. Also, damage parameters constituting the Gurson-Tvergaard-Needleman model in conjunction with Hill's 48 yield criterion were calibrated for a typical nuclear reactor material through a genetic algorithm. Finally, the J-R curve of a standard compact tension specimen was predicted by further detailed FE analyses employing the calibrated damage parameters. It showed a lower fracture resistance of the specimen material than that based on the isotropic yield criterion. Therefore, a more realistic J-R curve of a reactor material can be obtained effectively from the proposed methodology by taking into account a reduced load-carrying capacity due to anisotropy.

• 한국구조물진단유지관리공학회 논문집
• /
• 제19권5호
• /
• pp.10-21
• /
• 2015

콘크리트 구조물의 내력성능을 향상시키기 위해 탄소섬유쉬트(Carbon Fiber-Reinforced Plastic Sheet, 이하 CFRP sheet)로 보강된 콘크리트에 대해 많은 연구가 수행되어 왔다. 본 연구는 CFRP sheet로 구속된 콘크리트에 대한 연구 중 미비한 부분을 보완하기 위하여 보강겹수, 시험체의 크기, 형상비, 겹이음길이를 변수로 하여 연구를 수행하였다. 각 시험체별 응력-변형률 곡선을 통해 콘크리트의 거동을 비교하였으며, 최대압축강도를 통하여 CFRP sheet의 보강효과를 확인하였다. 보강겹수의 증가에 따라 콘크리트의 압축성능은 크게 개선되었으며, 시험체의 크기와 형상비의 변화를 통해 이론적인 부분을 검증하였고, 겹이음길이는 둘레의 5%이상으로 해야만 보강효과에 영향이 없는 것으로 확인하였다. 또한 본 연구의 시험결과와 기존 시험결과를 정리하고 이를 기준으로 기존 강도추정모델을 통계 분석함으로 모델의 정확성과 신뢰성을 검증하였다.

• Earthquakes and Structures
• /
• 제19권3호
• /
• pp.189-196
• /
• 2020

The near-collapse performance limit is defined as the deformation at the 20% drop of maximum base shear in the decreasing region of the pushover curve for ductile framed buildings. Although monotonic pushover analysis is preferred due to the simple application procedure, this analysis gives rise to overestimated results by neglecting the cumulative damage effects. In the present study, the acceptabilities of monotonic and cyclic pushover analysis results for the near-collapse performance limit state are determined by comparing with Incremental Dynamic Analysis (IDA) results for a 5-story Reinforced Concrete framed building. IDA is performed to obtain the collapse point, and the near-collapse drift ratios for monotonic and cyclic pushover analysis methods are obtained separately. These two alternative drift ratios are compared with the collapse drift ratio. The correlations of the maximum tensile and compression strain at the base columns and beam plastic rotations with interstory drift ratios are acquired using the nonlinear time history analysis results by the simple linear regression analyses. It is seen that these parameters are highly correlated with the interstory drift ratios, and the results reveal that the near-collapse point acquired by monotonic pushover analysis causes unacceptably high tensile and compression strains at the base columns, as well as large plastic rotations at the beams. However, it is shown that the results of cyclic pushover analysis are acceptable for the near-collapse performance limit state.

• Journal of Advanced Marine Engineering and Technology
• /
• 제10권2호
• /
• pp.136-145
• /
• 1986

The perfect and accurate methods to control the wear are not made clear so far. For this phenomenon only mating surface has been studied. In order to control the wear the essence of it has to be made clear. It is reported that adhesive wear might occure as a result of plastic deformation, the fracture and removal or transfer asperities on close contacting surfaces. On this view point the plastic flow was attempted to compare with fluid or electromagnetic flow. The partial differential equations of equilibrium for the plane strain deformation will make use of the method of characteristics. The characteristic curves or characteristics of the hyperbolic equation coincide with the slip lines by R. Hill's papers. By Hencky's stress equation, it is evident that if P and .phi. are prescribed for a boundary condition then it may be possible to proceed along constant .alpha. and .betha. lines to determine the value of the hydrostatic pressure everywhere in the slip line field net work. A wedge formation mechanism has been considered for an explanation of this matters. The analysis shows that there is a critical value, which depends on the hardness ratio and the shear stress on the interface, for the top angle of asperity is less than this critical value, the asperity can yield plastically despite of being harder than the mating surface.

• Steel and Composite Structures
• /
• 제38권6호
• /
• pp.617-635
• /
• 2021

This paper numerically investigated the behavior of built-up square concrete-filled steel tubular (CFST) columns under combined preload and axial compression. The finite element (FE) models of target columns were verified in terms of failure mode, axial load-deformation curve and ultimate strength. A full-range analysis on the axial load-deformation response as well as the interaction behavior was conducted to reveal the composite mechanism. The parametric study was performed to investigate the influences of material strengths and geometric sizes. Subsequently, influence of construction preload on the full-range behavior and confinement effect was investigated. Numerical results indicate that the axial load-deformation curve can be divided into four working stages where the contact pressure of curling rib arc gradually disappears as the steel tube buckles; increasing width-to-thickness (B/t) ratio can enhance the strength enhancement index (e.g., an increment of 1.88% from B/t=40 to B/t=100), though ultimate strength and ductility are decreased; stiffener length and lip inclination angle display a slight influence on strength enhancement index and ductility; construction preload can degrade the plastic deformation capacity and postpone the origin appearance of contact pressure, thus making a decrease of 14.81%~27.23% in ductility. Finally, a revised equation for determining strain εscy corresponding to ultimate strength was proposed to evaluate the plastic deformation capacity of built-up square CFST columns.

• Structural Engineering and Mechanics
• /
• 제42권2호
• /
• pp.153-174
• /
• 2012

Micromechanical facture models can be used to predict ductile fracture in steel structures. In order to calibrate the parameters in the micromechanical models for the largely used Q345 steel in China, uniaxial tensile tests, smooth notched tensile tests, cyclic notched bar tests, scanning electron microscope tests and finite element analyses were conducted in this paper. The test specimens were made from base metal, deposit metal and heat affected zone of Q345 steel to investigate crack initiation in welded steel connections. The calibrated parameters for the three different locations of Q345 steel were compared with that of the other seven varieties of structural steels. It indicates that the toughness index parameters in the stress modified critical strain (SMCS) model and the void growth model (VGM) are connected with ductility of the material but have no correlation with the yield strength, ultimate strength or the ratio of ultimate strength to yield strength. While the damage degraded parameters in the degraded significant plastic strain (DSPS) model and the cyclic void growth model (CVGM) and the characteristic length parameter are irrelevant with any properties of the material. The results of this paper can be applied to predict ductile fracture in welded steel connections.

• 콘크리트학회논문집
• /
• 제18권2호
• /
• pp.293-298
• /
• 2006

The reinforced concrete(RC) structures strengthened with fiber reinforced plastic(FRP) has been accepted by the construction engineering community for rehabilitation. FRP composites can present many advantages like a corrosion resistance, strength-weight ratio, relatively short application time, and cost effectiveness. The beams under design load, however, are cracked and result in degrading the strength. It is difficult to recognize cracks and deflections on the surface of the concrete members retrofitted with FRP through the life cycle. For these reasons, if they result in the effects, which were below the expected strength, we must monitor the state of concrete structures all the time in order to take an appropriate measure. Fiber Bragg Grating(FBG) sensor excel as monitoring of investigating the stress state of the retrofitted beams with FRP. The main objective of this study is to measure strain by experiment and analyze the behavior of RC beams retrofitted with FRP using FBG sensor. The kinds of FRP which were used in research are carbon, glass and improved hybrid FRP(IFRP) that has capacity than any other FRP. Other variables are the length of FRP, the number of sheet.

• Steel and Composite Structures
• /
• 제2권3호
• /
• pp.171-194
• /
• 2002

In this paper, the behaviour of axially loaded partially encased composite columns made with light welded H steel shapes is examined using ABAQUS finite element modelling. The results of the numerical simulations are compared to the response observed in previous experimental studies on that column system. The steel shape of the specimens has transverse links attached to the flanges to improve its local buckling capacity and concrete is poured between the flanges only. The test specimens included 14 stubcolumns with a square cross section ranging from 300 mm to 600 mm in depth. The transverse link spacing varied from 0.5 to 1 times the depth and the width-to-thickness ratio of the flanges ranged from 23 to 35. The numerical model accounted for nonlinear stress-strain behaviour of materials, residual stresses in the steel shape, initial local imperfections of the flanges, and allowed for large rotations in the solution. A Riks displacement controlled strategy was used to carry out the analysis. Plastic analyses on the composite models reproduced accurately the capacity of the specimens, the failure mode, the axial strain at peak load, the transverse stresses in the web, and the axial stresses in the transverse links. The influence of applying a typical construction loading sequence could also be reproduced numerically. A design equation is proposed to determine the axial capacity of this type of column.