• 한국전산구조공학회논문집
• /
• 제32권1호
• /
• pp.37-44
• /
• 2019

결합 기반 페리다이나믹 모델은 간단한 재료 모델을 통해 취성 재료의 다양한 동적 파괴 특성을 확인할 수 있었지만, 다양한 재료 구성 모델을 표현하는데 많은 한계점이 나타났다. 특히, 절점 간 결합이 서로 독립적으로 작용하여 포아송 비가 고정되고 전단 변형이 표현되는 않는 문제점이 있다. 상태 기반 페리다이나믹 모델은 보다 일반화되고 엄밀한 재료 모델링이 가능하며, 모든 결합의 변형 정보를 통해 각 절점의 거동이 계산되기 때문에 결합 기반 모델에서 표현하지 못한 전단 변형까지도 표현 가능하다. 본 연구에서는 상태 기반 페리다이나믹 모델을 통해 재료 모델을 구성하고, 소성 흐름 법칙으로부터 재료의 완전 소성 거동을 표현할 수 있도록 간단한 재료 모델을 구성한다. 평판 수치 예제를 통해 구성된 완전 소성 재료 모델을 검증하고 응력 변형 곡선을 확인한다. 또한 비국부 접촉 모델링을 통해 서로 다른 두 물체가 충돌하는 현상을 모사하여, 화강암반 모델의 고속 충돌 파괴 해석을 수행하고 결과분석 및 실험현상과 비교한다.

• 한국정밀공학회지
• /
• 제18권4호
• /
• pp.142-150
• /
• 2001

Automotive manufactures have taken more interests in tailored sheet metals for improving the rigidity, weight reduction, crash durability, and cost savings so that their application to auto-bodies has been increased. However, since the tailored sheet metals do not behave like un-welded sheet metals in press forming operations, the stamping engineers no longer rely only on conventional forming techniques. Futhermore, there is no clear understanding of the characteristics of welded metal which influence the overall press formability of tailored sheet metals. Recently, the computer simulations are prevailing for the evaluation of the formability. Unfortunately, the mechanical property of tailored sheet metal has to be quantitatively defined in the simulation. In this study, the analytical equations are formulated in order to find the mechanical properties of the welded metal in the tailored sheet metal welded by co$_2$laser. Based on force distribution assumption, the constitutive behavior of the welded metal is investigated using uniaxial tensile test results of base metals and tailored sheet metal. Then, the strength coefficient, work-hardening exponent, and plastic strain ratio of laser-welded metal are calculate from those of base metals and tailored sheet metal. In addition, the existence of weld defects in the welded metal is indirectly detected by examining the slop of strength coefficient of the welded metal.

• 한국재료학회지
• /
• 제22권1호
• /
• pp.16-23
• /
• 2012

Research into the development of high strength (1 GPa) and superior formability, such as total elongation (10%), and stretch-flangeability (50%) in hot-rolled steel was conducted with a thermomechanically controlled hot-rolling process. To improve the overall mechanical properties simultaneously, low-carbon steel using precipitation hardening of Ti-Nb-V multimicroalloying elements was employed. And, ideal microstructural characteristics for the realization of balanced mechanical properties were determined using SEM, EBSD, and TEM analyses. The developed steel, 0.06C-2.0Mn-0.5Cr-0.2(Ti + Nb + V), consisted of ferrite as the matrix phase and second phase of granular bainite with fine carbides (20-50 nm) in both phases. The significant factor of the microstructural characteristics that affect stretch-flangeability was found to be the microstructural homogeneity. The microstructural homogeneity, manifest in such characteristics as low localization of plastic strain and internally stored energy, was identified by grain average misorientation method, analyzed by electron backscattered diffraction (EBSD) and hardness deviation between the phases. In summar, a hot-rolled steel having a composition 0.06C-2.0Mn-0.5Cr-0.2(Ti + Nb + V) demonstrated a tensile strength of 998 MPa, a total elongation of 19%, and a hole expansion ratio of 65%. The most important factors to satisfy the mechanical property were the presence of fine carbides and the microstructural homogeneity, which provided low hardness deviation between the phases.

• 대한기계학회논문집
• /
• 제16권4호
• /
• pp.684-695
• /
• 1992

본 연구에서는 3차원 형상의 금형에 의한 박판금속 성형 공정을 에너지법으로 해석함에 있어 스윕곡면(SWeep surface)을 통해 기하학적 형상을 효과적으로 표현하는 방법을 제안하고, 이를 직사각형 격막의 정수압벌징의 해석에 으용하여 이에 의한 결 과를 이미 보고된 자료와 비교함으로써 일반적인 박판 성형공정을 해석하는데 본 이론 의 적용 가능성에 대하여 논의하고자 한다.

• Structural Engineering and Mechanics
• /
• 제57권3호
• /
• pp.507-528
• /
• 2016

Reduced beam section (RBS) moment resisting connections are among the most economical and practical rigid steel connections developed in the aftermath of the 1994 Northridge and the 1995 Kobe earthquakes. Although the performance of RBS connection has been widely studied, this connection has not been subject to in the skewed conditions. In this study, the seismic performance of dogbone connection was investigated at different angles. The Commercial ABAQUS software was used to simulate the samples. The numerical results are first compared with experimental results to verify the accuracy. Nonlinear static analysis with von Mises yield criterion materials and the finite elements method were used to analyze the behavior of the samples The selected Hardening Strain of materials at cyclic loading and monotonic loading were kinematics and isotropic respectively The results show that in addition to reverse twisting of columns, change in beam angle relative to the central axis of the column has little impact on hysteresis response of samples. Any increase in the angle, leads to increased non-elastic resistance. As for Weak panel zone, with increase of the angle between the beam and the column, the initial submission will take place at a later time and at a larger rotation angle in the panel zone and this represents reduced amount of perpendicular force exerted on the column flange. In balanced and strong panel zones, with increase in the angle between the beam and the central axis of the column, the reduced beam section (RBS), reaches the failure limit faster and at a lower rotation angle. In connection of skewed beam, balanced panel zone, due to its good performance in disposition of plasticity process away from connection points and high energy absorption, is the best choice for panel zone. The ratio of maximum moment developed on the column was found to be within 0.84 to 1 plastic anchor point, which shows prevention of brittle fracture in connections.

• 한국미생물·생명공학회지
• /
• 제24권1호
• /
• pp.92-100
• /
• 1996

For the production of poly(3-hydroxybutyrate-co-3-hydroxyvalerate)(P(3HB-co-3HV)) from butyric acid and valeric acid, 10 strains of bacteria capable of producing P(3HB-co-3HV) were isolated from soil. Among them, the strain HJ-067 showed the best ability of producing P(3HB-co-3HV), and was indentified as a Azotobacter sp. For the production of P(3HB-co-3HV), the optimum concentrations of butyric and valeric acid were 3.0g/l, respectively. The most effective nitrogen source was $(NH_4)_{2}SO_4$ at an optimum concentration of 0.75g/l, which was equivalent to 21.36 in C/N ratio. Deficiency of the cationic metal ions ($Zn^{2+},\;Co^{2+},\;Mn^{2+}$) in the proguction medium had stimulating effect on P(3HB-co-3HV) accumulation, especially in the manganese. deficient medium. The optimum temperature for P(3HB-co-3HV) production was 27$^{\circ}C$ and the optimum initial pH was 7.0. Under the optimum conditions, 1.82g/l of P(3HB-co-3HV) and 3.00g/l of dry biomass were produced after 36 hour cultivation, and the P(3HB-co-3HV) yield and HV% were 60.60% (w/w), 15.92%, respectively.

• 한국강구조학회 논문집
• /
• 제14권4호
• /
• pp.471-479
• /
• 2002

본 논문에서는 고강도콘크리트충전 각형강관장주에 대한 실험결과와 탄소성해석결과를 비교분석했다. 실험체는 모두 고강도콘크리트 충전 각형강관장주로 18개를 제작하였으며, 편심비에 따라 중심 및 편심가력하였다. 본 연구의 주요 파라메타는 단면폭에 대한 유효좌굴 길이의 비($L_K$/D)= 4, 8, 12, 24, 30와 가력편심비(e)=0, k, 3k이다. 본 논문에서 고강도콘크리트 충전 각형강관장주의 내력에 관한 해석 및 실험을 통하여 다음과 같은 결과를 얻었다. $L_K$/D=12 이하의 고강도콘크리트충전 각형강관단주는 콘크리트 감소계수 $c{\gamma}u=0.85$를 고려한 전소성내역에 도달했으나, $L_K$/D=18 이상의 장주실험체는 콘크리트 감소계수를 고려한 전소성내력에 도달하지 않았다. 실험에 의한 고강도콘크리트충전 각형강관장주의 탄소성거동은 제안된 해석치의 종국내력$N_{ASSUMED}$과 비교적 양호한 접근을 보여주었다. 콘크리트 압축강도의 감소계수 $c{\gamma}u=0.85$를 고려하지 않은 CFT설계기준과 고강도 콘크리트를 충전한 각형강관기둥의 실험결과치는 비교적 잘 일치함을 알 수 있었다.

• Journal of Welding and Joining
• /
• 제17권1호
• /
• pp.124-132
• /
• 1999

Thermal fatigue strength of the solder joints is the most critical issue for TSOP(Thin Small Outline Package) because the leads of this package are extremely short and thermal deformation cannot be absorbed by the deflection of the lead. And the TSOP body can be subject to early fatigue failures in thermal cycle environments. This paper was discussed distribution of thermal stresses at near the joint between silicon chip and die pad and investigated their reliability of solder joints of TSOP with 42 alloy clad lead frame on printed circuit board through FEM and 3 different thermal cycling tests. It has been found that the stress concentration around the encapsulated edge structure for internal crack between the silicon chip and Cu alloy die pad. And using 42 alloy clad, The reliability of TSOP body was improved. In case of using 42 alloy clad die pad(t=0.03mm). $$\sigma$_{VMmax}$ is 69Mpa. It is showed that 15% improvement of the strength in the TSOP body in comparison with using Cu alloy die pad $($\sigma$_{VMmax}$=81MPa). In solder joint of TSOP, the maximum equivalent plastic strain and Von Mises stress concentrate on the heel of solder fillet and crack was initiated in it's region and propagated through the interface between lead and solder. Finally, the modified Manson-Coffin equation and relationship of the ratio of $N_{f}$ to nest(η) and cumulative fracture probability(f) with respect to the deviations of the 50% fracture probability life $(N_{f 50%})$ were achieved.

• 한국구조물진단유지관리공학회 논문집
• /
• 제13권2호통권54호
• /
• pp.223-230
• /
• 2009

본 연구는 다양한 직경-두께비와 콘크리트 강도를 고려한 콘크리트 충전강관의 휨 거동을 다루었다. 유한 요소 해석을 위하여 상용 프로그램 LUSAS를 사용하였으며, 충전 강관의 콘크리트와 강 사이의 부착면의 상세거동을 고려하기 위하여 조인트 요소를 적용하였다. 또한, 콘크리트와 강관의 비선형성을 고려하기 위하여 소성영역에서 증가된 응력을 사용한 콘크리트와 강의 응력-변형률 곡선을 사용하였다. 제안된 방법으로 구한 수치해석 결과는 등분포하중을 받는 강관의 하중-변위 곡선에 대한 실제 실험 결과와 잘 일치하였다. 몇 가지 매개변수 연구는 서로 다른 직경-두께비와 콘크리트 강도에 대하여 휨 영향을 받는 콘크리트 충전강관의 구조적 특성에 초점을 두었다.

• 대한기계학회논문집
• /
• 제11권3호
• /
• pp.376-385
• /
• 1987

본 연구에서는 평면응력 파괴인성치의 거동에 관한 일련의 연구로서 위와 같 은 점을 고려하여 얇은 두께의 시험편을 이용하여 z의 변화에 대한 평면응력 파괴인성 치와 J저항곡선을 실험적으로 고찰하였으며 크랙성장을 고려한 J적분식도 검토하였다. 크랙길이는 하중제거 컴플라이언스법에 의하여 구하였고, ASTM E813의 방법으로J= .sigma.$_{f}$ .DELTA.(2ａ)인 크랙둔화선과 J저항곡선의 교점에서 구한 J적분값을 J$_{c}$로 정 의하였다. 또한, 재료를 변형경화재료로 가정하여 HRR응력변형율장의 특성을 이용 하여 J적분값을 구한 후 실험치와 상호 비교 검토하였다.이때 입력자료는 실험치의 그것과 동일하게 하였다. 동시에 z의 변화에 대한 T의 변화도 함께 고찰하였다.다.