• Maxillofacial Plastic and Reconstructive Surgery
• /
• 제27권2호
• /
• pp.131-139
• /
• 2005

The therapeutic goal of implant dentistry is not merely tooth replacement but total oral rehabilitation. Considering dental implants as a treatment option can be provided patients with positive, long-term results. Implant dentistry has gone through many phases over the years. Modern technology and design allows us to predictably place our dental implants often load the implants at the time of placement. The purpose of this study is to evaluate the implant stability after immediate loading in dogs. The control group was performed delay loading and experimental group was immediate loading. Each group was measured periotest value(PTV) to evaluate clinical mobility and performed radiographic examination to evaluate marginal bone loss. Statistically significant difference was not founded in control group between experimental group in PTV(P>0.05) and marginal bone loss(P>0.05). Finally, implant stability after immediate loading was similar to delay loading implant.

• 한국해양공학회지
• /
• 제12권1호
• /
• pp.10-22
• /
• 1998

In the present work the elastic-plastic FE formulations using dynamic explicit time integration schemes are used for numerical analysis of a large auto-body panel stamping processes. For analyses of more complex cases with larger and more refined meshes, the explicit method is more time effective than implicit method, and has no convergency problem and has the robust nature of contact and friction algorithms while implicit method is widely used because of excellent accuracy and reliability. The elastic-plastic scheme is more reliable and rigorous while the rigid-plastic scheme require small computation time. In finite element simulation of auto-body panel stamping processes, the roobustness and stability of computation are important requirements since the computation time and convergency become major points of consideration besides the solution accuracy due to the complexity of geometry conditions. The performnce of the dynamic explicit algorithms are investigated by comparing the simulation results of formaing of complicate shaped autobody parts, such as a fuel tank and a rear hinge, with the experimental results. It has been shown that the proposed dynamic explicit elastic-plastic finite element method enables an effective computation for complicated auto-body panel stamping processes.

• Earthquakes and Structures
• /
• 제5권6호
• /
• pp.679-702
• /
• 2013

During an earthquake, soils filter and send out the shaking to the building and simultaneously it has the role of bearing the building vibrations and transmitting them back to the ground. In other words, the ground and the building interact with each other. Hence, soil-structure interaction (SSI) is a key parameter that affects the performance of buildings during the earthquakes and is worth to be taken into consideration. Columns are one of the most crucial elements in RC buildings that play an important role in stability of the building and must be able to dissipate energy under seismic loads. Recent earthquakes showed that formation of plastic hinges in columns is still possible as a result of strong ground motion, despite the application of strong column-weak beam concept, as recommended by various design codes. Energy is dissipated through the plastic deformation of specific zones at the end of a member without affecting the rest of the structure. The formation of a plastic hinge in an RC column in regions that experience inelastic actions depends on the column details as well as soil-structure interaction (SSI). In this paper, 854 different scenarios have been analyzed by inelastic time-history analyses to predict the nonlinear behavior of RC columns considering soil-structure interaction (SSI). The effects of axial load, height over depth ratio, main period of soil and structure as well as different characteristics of earthquakes, are evaluated analytically by finite element methods and the results are compared with corresponding experimental data. Findings from this study provide a simple expression to estimate plastic hinge length of RC columns including soil-structure interaction.

• Archives of Plastic Surgery
• /
• 제37권4호
• /
• pp.457-460
• /
• 2010

Purpose: The great toe presents a reconstructive challenge for plastic surgeons. The big toe has much importance not only for the gait and the stability, but also for appearance aspects. Few reports have documented the reconstruction of big toe defects and we report a unique case of free flap reconstruction technique. Methods: A 41-year-old man with right great toe open fracture with soft tissue necrosis was referred from the orthopedic surgery department. On physical examination, there was the skin necrosis circumferentially and the fratured bone was severely fragmented. The metatarsophalangeal (MTP) joint of the big toe was intact. After the wound debridement, we harvested the innervated anterolateral thigh flap and transposed to the defected area. After five months, we finally retouched the flap by the dorsal defatting and distal debulking. Results: He had an uneventful postoperative course without infection, dehiscence and flap necrosis. He has remained asymptomatic for eight months without any recurrence such as the osteomyelitis. Finally, he kept the normal gait and posture with weight bearing on the reconstructed great toe and foot. Conclusion: The anterolateral thigh flap is described for the reconstruction of the great toe. It involves two stage procedure with the minimal donor site morbidity and provides a good cosmetic result.

• 한국임상약학회지
• /
• 제8권1호
• /
• pp.59-67
• /
• 1998

The stability of cytarabine (manufactured by two pharmaceutical companies) in intravenous admixture and in plastic syringe was investigated. The admixures containing cytarabine 0.35, 8.6, and 17.1 mg/ml in $0.9\%\;NaCl\;or\;5\%$ D5W were placed in PVC bags or glass bottles, and the reconstituted cytarabine (50 mg/ml) was placed in plastic syringe. One ml aliquots were withdrawn immediately after each preparation and stored at $4^{\circ}C\;or\;24^{\circ}C$ for 1, 2, 4, 6, 8, 10, and 14 days unprotected from light. Each sample was tested for pH and visually inspected for precipitation and change in color. Cytarabine concentrations were measured using high-performance liquid chromatography. Neither precipitation nor change in color was noted, and there were no change in pH during 14 days of testing. The changes in cytarabine concentrations were less than $10\%$. In conclusion, cytarabine in IV admixture or plastic syringe was stable for at least 14 days at $4^{\circ}C\;and\;24^{\circ}C.$(Kor. J. Clin. Pharm. 1998; 8(1): 59-67)

• Maxillofacial Plastic and Reconstructive Surgery
• /
• 제33권3호
• /
• pp.218-224
• /
• 2011

Purpose: The purpose of this study is to evaluate the post-operative skeletal stability after surgical correction of patients with mandibular prognathism by bilateral sagittal split ramus osteotomy (BSSRO) and to evaluate the horizontal relapse tendency after the surgery. Methods: Twenty-six patients with Class III dental and skeletal malocclusion were selected for this retrospective study. Fifteen of them underwent BSSRO for mandibular setback and eleven of them underwent two-jaw surgery (Lefort I and BSSRO). In each patient, lateral cephalometric radiographs were taken pre-operatively, post-operatively within 1 week, and post-operatively after eight months. After tracing of the cephalometric radiographs, various parameters were measured. The analyses were done by linear measurement to evaluate the change in position of hard tissue B point, pogonion and mandibular plan angle by examination on lateral cephalograms. Results: The horizontal relapse rate was 27.1% at B point and 31.6% at pogonion in patients who underwent BSSRO. The horizontal relapse rate of the group where the amount of correction exceeded 10 mm was 25.69% at B point. Conclusion: There were no statistical differences on the magnitude of setback and direction of rotation of the mandible in mandibular stability. There were also no statistical differences between single mandibular surgery and two-jaw surgery for mandibular stability.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• 제38권
• /
• pp.30.1-30.6
• /
• 2016

Background: The prognosis of wide implants tends to be controversial. While wider implants were initially expected to result in a larger osseointegration area and have higher levels of primary stability, they were reported to have a relatively high rate of failure. The clinical outcome of ultrawide implants of more than 6 mm in diameter was evaluated through a retrospective study. Methods: The investigation was conducted on patients who had received ultrawide implant (${\geq}6mm$ diameter) placements in Seoul National University Bundang Hospital from January 2008 to December 2013. Complications were investigated during the maintenance period, and marginal bone loss was measured using periapical radiography. Primary stability immediately after the implant placement and second stability after second surgery or during impression were measured using $Osstell^{(R)}$ Mentor (Osstell, Sweden) as an implant stability quotient (ISQ). Results: Fifty-eight implants were placed in 53 patients (30 male, 23 female), and they were observed for an average of $50.06{\pm}23.49$ months. The average ISQ value increased from $71.22{\pm}10.26$ to $77.48{\pm}8.98$ (P < 0.005). The primary and secondary stability shows significantly higher at the mandible than at the maxilla (P < 0.001). However, mean survival rate shows 98.28 %. Average marginal bone loss of 0.018 and 0.045 mm were measured at 12 and 24 months after the loading and 0.14 mm at final follow-up date (mean 46.25 months), respectively. Also in this study, the bone loss amount was noticeably small compared to regular implants reported in previous studies. Conclusions: The excellent clinical outcome of ultrawide implants was confirmed. It was determined that an ultrawide implant can be used as an alternative when the bone quality in the posterior teeth is relatively low or when a previous implant has failed.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• 제33권2호
• /
• pp.137-143
• /
• 2011

Purpose: Orthognathic surgery is required in patients with severe skeletal disharmony and facial asymmetry, which results in functional and esthetic improvement. Recently, bimaxillary surgery has become generalized. Establishment of the occlusal plane among several other factors included in the surgery plan is a major consideration for the diagnosis and treatment plan and it is also an important factor for postoperative stability. Methods: In this study, we assessed postoperative stability of occlusal plane, B-point, and pogonion point on 20 patients who underwent two-jaw surgery in the Chosun Dental Hospital from 2000 to 2007. Preoperative and postoperative states and at least a one year postoperative follow-up were compared. Results: The postsurgical relapse volume of the occlusal plane to the SN plane and the FH plane was $-0.26{\pm}2.8^{\circ}$ and $-0.44{\pm}3.29^{\circ}$, respectively and after two-jaw surgery, the stability of occlusal plane was maintained. The horizontal relapse degree was $0.85{\pm}0.46$ mm and $0.76{\pm}0.48$ mm, respectively, and the vertical relapse degree was $1.16{\pm}0.36$ mm and $1.13{\pm}0.71$ mm of the B point and the Pogonion point at the time after minimal 1 year. Conclusion: The vertical relapse amount was shown to be slightly larger than the horizontal relapse amount.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• 제29권2호
• /
• pp.141-147
• /
• 2007

The purpose of this study was to evaluate the effects of maxillary occlusal plane angle to postoperative skeletal stability by comparative analysis after two-jaw surgery of patients with skeletal CIII malocclusion. This study was made with lateral cephalometric radiography of 52 patients with skeletal class III malocclusion that were performed to Le Fort I osteotomy and BSSRO. And 52 patients were divided to Group A(n=30) and B(n=22). Maxillary posterior impaction was not conducted in Group A, which the pre-operative maxillary occlusal plane angle was in a normal range, and for Group B, which the pre-operative maxillary occlusal plane was low, the maxillary posterior impaction was conducted. The results were obtained as follows : 1. The relapse rate of Group A, which the pre-operative maxillary occlusal plane angle was in a normal range, was relatively stable compared to Group B, which the pre-operative maxillary occlusal plane was low. 2. The relapse rate of each measurement of Group B, which had the maxillary occlusal plane altered during the operation, was somewhat high, and of those, the post-operative relapse rate of overjet, overbite, mandibular plane angle appeared to be significantly high in the statistics. The analyzed results above, was thought to be indicating that the pre-operative maxillary occlusal plane angle was closely related to the post-operative skeletal stability, and that obtaining post-operative skeletal stability only through operative normalization of occlusal plane angle may meet limitations.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• 제37권
• /
• pp.9.1-9.7
• /
• 2015

Background: This study are to identify the symptomatic changes and condylar stability after 2 jaw surgery without preceding treatments for Temporomandibular joints(TMJ) in class III patients with the TMJ symptoms; and to assess therapeutic effect of 2 jaw surgery and the necessity of preceding treatment for alleviation of TMJ symptoms. Methods: 30 prognathic patients with preexisting TMJ symptoms were divided into 2 groups according to presence or absence of preceding treatments before the surgery. We evaluated symptomatic changes on both TMJ by questionnaires and clinical examinations. And we reconstructed 3D cone beam computed tomography images before 2 jaw surgery, immediately after the surgery, and 6 months or more after the surgery with SimPlant software, and analyzed the stability of condylar position on 3D reconstruction model. Significances were assessed by the Wilcoxon signed rank test on SPSS ver. 20.0. Results: Both groups had favorable changes of TMJ symptoms after orthognathic surgery. And postoperative position of condyle had good stability during follow-up period. Conclusion: 2 jaw surgery without preceding treatments for TMD can have therapeutic effect for TMD patients with class III malocclusion.