부산 광안리 해수욕장에서 표착된 플라스틱 폐기물의 오염 특성 (Pollution Characteristics of Plastic Debris on the Gwanganri Beach, Busan)
- 김종화
-
- 수산해양교육연구
- /
- 제27권6호
- /
- pp.1854-1864
- /
- 2015
-
In order to analyze the pollution characteristics of small plastic debris(SPD) ashore on the shoreline of coastal flow, 12 times of survey were conducted on the Gwanganri beach of Busan for nearly 3 years. The sampled stations on the beach were divided into 11 squared survey sites from St. G1 to G11(see [Fig. 1]) and all of SPD was sorted into 11 items like P1 to P11 according to the kind of plastic materials and products(see
). 1. Total weights of them were widely ranged from 3.23g to 30.58g and also total amounts, from 39 ea to 398 ea on each site. 2. The ratio of items, P2 and P3, were accounted for 63% among all of them. 3. The seasonal variabilities of them were not founded with remarkable. 4. The correlation of total weights and amounts have reliable coefficients to some extent on the survey sites, but nearly didn't have reliances on items. 5. The average densities of total weights and amounts were computed with
$4.506g/m^2$ ,$51.936ea/m^2$ , respectively.전자레인지 조리 식품 용기의 용출 특성 비교 (Comparison of extracted amounts and patterns of microwavable ready-to-meal plastic packaging materials)
- 안덕준;유승석
-
- 한국포장학회지
- /
- 제7권2호
- /
- pp.12-18
- /
- 2001
-
Increasing use of plastics in food packaging materials has led to the issue of food-plastic packaging materials mutual interactions. Rapid development of new microwavable ready-to-meal products requires suitable plastic packaging materials for safe heating with the contained food. However, data is still required to diminish consumers' safety concern about ready to meal packaging materials. Amounts and patterns of extracted materials from the ready-to-meal packaging materials of Korea and Japan by heat treatments (
$120^{\circ}C$ for 30 min.) was investigated and compared by using Gas chromatography. Total peak number of extracted materials from Korea packaging materials was six while that of extracted materials from Japan's was only two. Moreover, the extracted amounts of packaging materials from Korea company was much higher than those of Japan's. Additional research is needed to justify the reason why extracted materials from packaging materials from Korea be much more occurred, and how the amounts from Korea packaging materials can be reduced.
재활용을 위한 몰드베이스 구조 및 표준화 (The Structure and Standardization of Mold Base for Recycling)
- 제덕근;한성렬;송준엽;정영득
-
- 한국정밀공학회지
- /
- 제20권5호
- /
- pp.225-231
- /
- 2003
-
The injection molding is a traditional manufacturing method that can make plastic parts by just one time in mold. Therefore, the injection molding has become one of a manufacturing method, which is widely applied in a producing of plastic products. Nowadays, to use of plastic parts has increased and plastic product-model using term has been shorten. By these reasons, using term of a injection mold has fast been reduced. These produced molds will be disused and leaved in a storage after a regular term to use it. These leaved molds are sometime sold as scrap iron. But, these molds have lots parts for recycling except special parts for example, cavities, cores and eject pins, etc. In this research, we investigated when the cavity and core of in injection mold would be changed, the injection mold could be recycled. We suggested the structures and standardizations for recycling of a moldbase. We also developed a program in which can be used when the recycling moldbase design in the Auto-CAD with the recycling standards. We called this program as the Recy-Mold. For the availability of the program and moldbase structure fur the recycling standards, we experimented a used mold for automobile lens, which was remanufactured by the recycling standard. The results of this test showed feasibility for the recycling mold.
Commercialization of Microencapsulated Electrophoretic Displays
- McCreary, Michael
-
- 한국정보디스플레이학회:학술대회논문집
- /
- 한국정보디스플레이학회 2006년도 6th International Meeting on Information Display
- /
- pp.524-524
- /
- 2006
-
For decades, the pursuit of volume commercialization of low-power reflective displays with a paper-like look has been an unfulfilled dream. While steady technical progress was made throughout the late 1990s, there were still no volume products incorporating electronic paper displays (EPD) on the market. Now, microencapsulated electrophoretic display technology, also called electronic ink, has moved into volume production with a frontplane laminate (FPL) display component called E Ink Imaging Film™. This film is coated roll to roll on a flexible plastic substrate and integrated into a display module. Today, all-plastic segmented displays are being shipped as well as displays with electronic ink FPL being driven by glass TFT backplanes. A roadmap to active matrix flexible electrophoretic displays is being enabled by rapid technical progress on flexible TFT backplanes by a variety companies. Each of the approaches to these backplanes and flexible active matrix displays has different advantages for the various market segments being pursued including large format flexible displays for e-news and other reader applications, rollable displays for compact readers, and high resolution small format displays up to 400 ppi that can have fully integrated drive electronics to reduce size and drive down costs. Backplane approaches include Si on plastic, organic transistors on plastic, and Si transistors on flexible stainless steel substrate. Progress is also being made on next generation inks, including more reflective inks with higher contrast ratios. A full color 6 inch, 170 pixel per inch (PPI) active matrix display using a newer generation ink has been developed and this will be described and demonstrated. Large format segmented flexible displays will also be described.
전남지역의 문화관광축제 상품현황 분석 (Market Analysis of Cultural Products Sold in Jeonnam Cultural Tourism Festivals)
- 이미숙;정경희
-
- 대한가정학회지
- /
- 제48권1호
- /
- pp.97-110
- /
- 2010
-
The purpose of this study was to identify development strategies of high value-added cultural products in order to help promote Jeonnam cultural tourism festivals. In order to achieve this purpose, we carried out a market survey of cultural products sold in cultural tourism festivals held successfully within the Jeonnam area.The subjects of this study were local festivals which were labeled as cultural tourism festivals by the Ministry of Culture, Sports and Tourism from 2000 to 2008. The results of this study were as follows: Firstly, a store survey was conducted to analyze the categories of products on offer. As a result, the most frequent product was accessories (46.2%), followed by clothing and miscellaneous goods (25.2%), ceramic products (14.8%), interior decoration products (9.1%), and stationery (4.6%). Secondly, in the design motif used for cultural products, most products did not contain festival or local images. Cultural products with festival images made up 47.2% of the range, while only 2.3% of products on offer contained local imagery. The remaining 50.3% of cultural products for sale did not use festival or local images. Finally, in terms of materials used, most products used metal (36.7%), followed by textiles (32.9%), ceramic (13.8%), wood (6.2%), plastic (6.2%), paper (3.6%), and leather (0.2%). For price range, 52.4% of product were equal to or below 10,000 won, followed by 33.1% between 10,000-30,000 won. The results of this study showed that the cultural products of Jeonnam festivals lacked symbolism of the region or festival itself. Furthermore, items and the price ranges were not diverse enough. A possible solution would be to address this short coming, but more importantly, design a marketing and commercial strategy tailored towards the promotion of cultural products which contain both regional and festival imageries.
사출금형의 냉각회로 종류에 따른 냉각효율의 비교 (Comparison of cooling effects according to cooling methods in injection mold)
- 노건철;장민규;제덕근;최윤식;정영득
-
- Design & Manufacturing
- /
- 제8권1호
- /
- pp.10-13
- /
- 2014
-
Plastic products are producted more than 70% of total processes by the injection molding. The injection molding process has 4 processes such as filling, packing, cooling and ejecting. It spends most of times in the cooling process. Therefore, it is important to control the mold temperature in producing plastic products. The time and system of cooling affect the product's quality and productivity. Especially, cooling time has about 60% of total injection cycle time. Therefore, we can improve a productivity by shortening cooling time. This study shows comparative study about cooling efficiency of spiral channel and baffle and observed the variation of time to freeze of molding As the result of CAE experiments, cooling rate by spiral channel had faster than baffle and as freeze time was decreased. Results of this study will be used widely to design for cooling system of injection mold.
사출성형금형에서 직선채널과 배플의 냉각효율 비교 (Comparison of Linear Channel and Baffle for Cooling Rate in Injection Mold)
- 문영배;최윤식;정영득
-
- Design & Manufacturing
- /
- 제6권1호
- /
- pp.1-4
- /
- 2012
-
Plastic products are producted more than 70% of total processes in the injection molding. The injection molding process has 4 processes such as filling, packing, cooling and ejecting. It spends most of times in the cooling process. Therefore, it is important to control the mold temperature in producing plastic products. The time and system of cooling affect the product's quality and productivity. Especially, cooling time has about 60% of total injection cycle time. Therefore, we can improve a productivity by shortening cooling time. In this study, it was made a comparative study about cooling of linear channels and baffles and observed the variation of mold temperature on the coolant's temperature. As the result, the linear channel's cooling rate had faster than baffles and as coolant's temperature was increased, difference of cooling time was increased. Result of this study will be used widely to design for cooling system of injection mold.
허브 냉간단조품의 공정설계 (Process Sequence Design in Cold Forged Part of Hub)
- 고대철;김병민;오세욱
-
- 대한기계학회논문집A
- /
- 제20권11호
- /
- pp.3387-3397
- /
- 1996
-
The Hub is an auto mobile component used as aircon clutch. The important aspects in cold forging of the Hub with complex geometry are the design of an initial shape of the workpiece, the possibility of the forming by one-stage operation and the determination of number of performs, etc. Based on the systematic procedure of process sequence design, in this paper, the forming operation of cold forged part of the Hub is designed by the rigid-plastic finite element method. The two design criterion of geometrical filling without defect and an even distribution of effective strain in final product are investigated in controlling the initial shape of the workpiece and preform configuration. It is noted that one preforming operation is required in order to obtain final product of the Hub.
플라스틱제품의 효율적인 모델링기법 (Efficient Modeling Method of Plastic Products)
- 권병욱;이건우
-
- 대한기계학회논문집
- /
- 제15권5호
- /
- pp.1503-1511
- /
- 1991
-
본 연구에서는 곡면을 포함할 수도 있는 얇은 물체를 모델링하기 위해 새로운 기법을 도입했는데, 그 기본 개념은 다음과 같다. Fig.(a)에서와 같이 먼저 사용자 는 박판으로 불리는 두께가 없는 얇은 판을 여러장 가지고 이들을 접거나, 오려내거나, 붙이는 등의 작업을 통해서 원하는 형상으로 모델링한다.각각의 박판의 형상의 입 력은 거의 모두 2차원 좌표계에서 이루어지기 때문에, 사용자는 마치 철판위에 선을 긋는 것과 같이 쉽게 박판의 형상을 입력할 수 있다. 또한 박판에서 임의의 부분을 오려내거나 임의의 박판을 붙이는 등의 작업을 통해서 원하는 형상으로 모델링한다. 각각의 박판의 형상의 입력은 거의 모두 2차원 좌표계에서 이루어지기 때문에, 사용자 는 마치 철판위에 선을 긋는 것과 같이 쉽게 박판의 형상을 입력할 수 있다. 또한 박판에서 임의의 부분을 오려내거나 임의의 박판을 붙이는 등의 작업이 기존의 시스템 에서와는 달리 복잡한 입력이나, 수행과정을 거치지 않기 때문에, 보다 편리한 모델링 을 할 수 있다. 또한 곡면으로 된 박판 형상의 경우는 해당되는 모서리들을 곡선으 로 바꿈으로써 모델링 되도록 하였다. 박판의 모델링이 끝나면, 입력된 박판에 일정 한 두께를 부여하여 Fig.2(b)에서와 같이 부피를 갖는 입체(솔리드)로 변환하게 되는 데 이 작업은 Stroud에 의한 것과 같이 시스템에서 자동으로 이루어진다.
금형 cavity 내의 압력 차이에 의한 발포사출품의 결정화도 차이 (The Difference of the Degree of Crystallinity of Foamed Plastics Depending on the Pressure Gradient in Mold Cavity)
- 이동욱;차성운;현창훈
-
- 한국정밀공학회:학술대회논문집
- /
- 한국정밀공학회 2003년도 춘계학술대회 논문집
- /
- pp.1354-1357
- /
- 2003
-
Mold Analysis is crucial factors in the design of injection molding process. Since the qualify of products depends on filing, shrinkage and etc, the procedure of prediction through analysis in the design of injection molding process is needed. In many cases, this kind of analysis makes it possible to predict pressure pattern which determines the condition of injection molding process. Crystallinity is the factor that determines the shrinkage of products. The studies showed the factors that had been related to the degree of crystallinity, which were mostly Weight Reduction, mold temperature and melt temperature. Therefore, the objective of this study is to see the differences of the degree of crystallinity depending on the positions of foamed plastics. The procedure of this study is as the following. First, Simulate the pressure gradient in mold cavity that can produces specimen by using Moldflow. Secondly, produce specimen and measure the degree or crystallinity of each part of specimen by using XRD. Lastly, identify the sensitivity of conventional plastic and foamed plastic on pressure gradient by comparing the simulation and the results of measurement.
이메일무단수집거부
- 본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나 그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며, 이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
- [게시일 2004년 10월 1일]
이용약관
-
제 1 장 총칙
- 제 1 조 (목적) 이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
- 제 2 조 (용어의 정의) ① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을 말합니다. ② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여 받은 자를 말합니다. ③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을 말합니다. ④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
- 제 3 조 (이용약관의 효력 및 변경) ① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다. ② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의 초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을 변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전 내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
- 제 4 조(약관 외 준칙) ① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다. ② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
-
제 2 장 이용계약의 체결
- 제 5 조 (이용계약의 성립 등) ① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한 온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다. ② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을 포함합니다.
- 제 6 조 (회원가입) 서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
- 제 7 조 (개인정보의 보호 및 사용) 당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
- 제 8 조 (이용 신청의 승낙과 제한) ① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다. ② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다. - 이용계약 신청서의 내용을 허위로 기재한 경우 - 기타 규정한 제반사항을 위반하며 신청하는 경우
- 제 9 조 (회원 ID 부여 및 변경 등) ① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다. ② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를 해지하고 재가입해야 합니다. ③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
-
제 3 장 계약 당사자의 의무
- 제 10 조 (KISTI의 의무) ① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록 하여야 합니다. ② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다. ③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를 거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야 합니다.
- 제 11 조 (회원의 의무) ① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며, 허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다. ② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된 ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다. ③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
-
제 4 장 서비스의 이용
- 제 12 조 (서비스 이용 시간) ① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을 원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에 서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를 통해 사전에 공지합니다. ② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만 이 경우 그 내용을 공지합니다.
- 제 13 조 (홈페이지 저작권) ① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고 있습니다. ② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을 받아야 합니다. ③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에 합치되게 인용할 수 있습니다. ④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우 저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
- 제 14 조 (유료서비스) ① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에 당 사이트 홈페이지를 통하여 회원에게 공지합니다. ② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
-
제 5 장 계약 해지 및 이용 제한
- 제 15 조 (계약 해지) 회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
- 제 16 조 (서비스 이용제한) ① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는 경우 서비스 이용을 제한할 수 있습니다. - 2년 이상 서비스를 이용한 적이 없는 경우 - 기타 정상적인 서비스 운영에 방해가 될 경우 ② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의 일시정지, 이용계약 해지 할 수 있습니다.
- 제 17 조 (전자우편주소 수집 금지) 회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
-
제 6 장 손해배상 및 기타사항
- 제 18 조 (손해배상) 당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
- 제 19 조 (관할 법원) 서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
- [부 칙] 1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.
자세히 찾기
이미지 검색 (β)