• Journal of Mushroom
• /
• v.16 no.3
• /
• pp.198-202
• /
• 2018

'Yong-A' was bred by Jeollanamdo Agricultural Research and Extension Services in 2015. It was primarily selected through monospore crossing between JNM21008 and JNM21013 in 2009. The strain is named as JNM-Mi-194 and 'Yong-A', showing major characteristics with good production yield. The cultivation characteristics, yield potential, and fruiting body characteristics of 'Yong-A' are as follows; The wrinkle of the fruiting body was of branching type its shape was wave type. MCM, YM, Malt, and PDA media were suitable for growth of this cultivar. The number of effective stipes was 13 ea/0.9 kg. The minor axis of pileus was 5 cm and the major axis was 9 cm. The yield was 291 g per plastic bag (0.9 kg). Yong-A required 60 days for mycelial running at $20^{\circ}C$. The growth and primordial period required 24 days, which was shorter than that of JNM-Mi-21002 (the conventional cultivar). Somatic incompatibility was observed between parental lines and Yong-A. Analysis of genetic diversity in the new variety 'Yong-A' showed a different profile compared to that of the parent strain when Random Amplified Polymorphic DNA primers were used.

• Journal of Wetlands Research
• /
• v.22 no.2
• /
• pp.153-160
• /
• 2020

Most studies defined microplastic (MP) as plastic particles less than 5 mm. The ubiquity of MP is raising awareness due to its potential risk to humans and the environment. MP can cause harmful effects to humans and living organisms. This paper review aimed to provide a better understanding of the sources, pathways, and impacts of MP in the environment. MP can be classified as primary and secondary in nature. Moreover, microplastic can also be classified as based on its physical and chemical characteristics. Stormwater and wastewater are important pathways of introducing MP in large water bodies. As compared to stormwater, the concentrations of MP in wastewater were relatively lower since wastewater treatment processes can contribute to the removal of MP. In terms of polymer distribution, wastewater contains a wider array of polymer varieties than stormwater runoff. The most common types of polymer found in wastewater and stormwater runoff were polypropylene (PP), polyvinyl chloride (PVC), polystyrene (PS), polyethylene (PE) and polyethylene terephthalate (PET). The continuous discharge and the increasing number of MP in the environment can pose greater hazards and harmful effects on humans and other living organisms. Despite the growing number of publications in relation to MP, further studies are needed to define concrete regulations and management strategies for mitigating the detrimental effects of MP in the environment.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.12 no.10
• /
• pp.4679-4688
• /
• 2011

This study was performed to the municipal waste generation amounts and characteristics for B city in Gangwon province, predicted the methane gas generation rate emitted from landfill, and analyzed the possibility of energy recovery to RDF(Refuse Derived Fuel) using combustible waste. The study results showed that the average bulk density of municipal waste for B city was 144.0 kg/$m^3$, and the average ratios of combustible waste were 36.0 % of paper, 21.6 % of vinyl, and 19.7 % of food waste. respectively. In the experiment for heating value, high and low heating value(moisture) was measured to 3,471 $kca{\ell}$/kg and 2,941 $kca{\ell}$/kg, respectively. After the prohibition of burying of food waste in landfill, the heating value of municipal waste was dramatically increased due to increase of the ratio of paper, vinyl, and plastic waste. The prediction results of methane gas generation rate emitted from landfill showed that the gas generation rate is increasing to 2,505.7 CH4 ton/year in 2021. After then, the rate is decreasing gradually. When the RDF facility is installed, the rate is decreasing after peaking at 1,956.9 CH4 ton/year in 2013. The generation rate of LFG emitted from waste landfill of B city was analyzed to 9.92 $m^3$/min, similar to 10.11 $m^3$/min for other city.

• Journal of Korean Society of Environmental Engineers
• /
• v.36 no.2
• /
• pp.127-138
• /
• 2014

As increasing concerns about potential risks and hazards in children's products, the laws and regulations for heavy metals and phthalate retardants contained in the children's products have been reinforced in many countries. Especially, in Korea, environment and health laws and regulations for children's products was declared in 2009. This study was researched in terms of contents and migration of phthalates and heavy metals in 124 children's products sold in the Korean market. The results for contents of heavy metals showed that 123 products contained different 14 heavy metals depending on kinds of products. As the results of migration by sucking, the heavy metals in the products such as black, plastic dolls, wood toys, and bottom mat for swimming were transferred into extraction solution. Ba, Cu, Zn, and Sn were transferred from most of these products into the extraction solution and Co, Ni and Pb were additionally transferred into several products. As the results of migration through a skin, while Ba, Cu, and Zn were transferred from most products containing the heavy metals, as for accessories, Cr, Ba, Ni, Zn, and Cu were migrated. The results of contents of phthalates presented that 21 products contained DBP, DEHP and DINP. Only 2 products showed the migration of DEHP by sucking. DEHP in most products were transferred and DBP for 2 products and DINP for 7 products were migrated.

• Korean Journal of Weed Science
• /
• v.30 no.3
• /
• pp.215-224
• /
• 2010

A greenhouse experiment was conducted to determine the effects of medium components and shade treatment on the growth, contents of total phenolics and flavonoids, and 1,1-diphenyl-2-picryl hydrazyl (DPPH) radical scavenging activity of Youngia sonchifolia. Substrates combined with coco peat and perlite (ratio 70:30 or 50:50, v/v) showed higher plant length, leaf area, and fresh weight than single substrate (P<0.05). Shade treatment also significantly reduced plant height, root length, leaf areas, and fresh weight (P<0.05) with increasing of the degree. Shading treatment, however, increased contents of total phenolics [mg ferulic acid equivalents $kg^{-1}$ dry wt.] and total flavonoids [mg naringin equivalents $kg^{-1}$ dry wt.] in shoot parts of Y. sonchifoli, showing 110.2 to 119.2 and 128.3 to 146.7 mg $kg^{-1}$, respectively. The antioxidant potential of the methanol extracts from the plants dose-dependently increased DPPH free radical scavenging activity, and the activity was higher in shoots (50.2 to 80.8%) than in roots (47.7 to 49.8%), and in shading treatment than in no shade.

• Journal of the Korean Wood Science and Technology
• /
• v.29 no.3
• /
• pp.47-58
• /
• 2001

For finding both ways of recycling the wood and plastic wastes and solving the problem of free formaldehyde gas emission through manufacturing wood particle-polypropylene fiber composite board without addition of formaldehyde-based thermosetting resin adhesive, control particleboards and nonwoven web composite boards from wood particle and polypropylene fiber formulation of 50 : 50, 60 : 40, and 70 : 30 were manufactured at density levels of 0.5, 0.6, 0.7, and 0.8 g/$cm^3$, and were tested both in the physical and mechanical properties according to ASTM D 1037-93. In the physical properties, control particleboard had significantly higher moisture content than composite board. In composite board, moisture content decreased with the increase of target density only in the board with higher content of polypropylene fiber and also appeared to increase with the increase of wood particle content at a given target density. Control particleboard showed significantly greater water absorption than composite board and its water absorption decreased with the increase of target density. In composite board, water absorption decreased with the increase of target density at a given formulation but increased with the increase of wood particle content at a given target density. After 2 and 24 hours immersion, control particleboard was significantly higher in thickness swelling than composite board and its thickness swelling increased with the increase of target density. In composite board, thickness swelling did not vary significantly with the target density at a given formulation but its thickness swelling increased as wood particle content increased at a given target density. Static bending MOR and MOE under dry and wet conditions increased with the increase of target density at a given formulation of wood particle and polypropylene fiber. Especially, the MOR and MOE under wet condition were considerably larger in composite board than in control particleboard. In general, composite board showed superior bending strength properties to control particleboard, And the composite board made from wood particle and polypropylene fiber formulation of 50 : 50 at target density of 0.8 g/$cm^3$ exhibited the greatest bending strength properties. Though problems in uniform mixing and strong binding of wood particle with polypropylene fiber are unavoidable due to their extremely different shape and polarity, wood particle-polypropylene fiber composite boards with higher performance, as a potential substitute for the commercial particleboards, could be made just by controlling processing variables.

• Korean Journal of Environmental Agriculture
• /
• v.17 no.2
• /
• pp.145-149
• /
• 1998

To find out the effect of water hyacinth(Eichhornia crassipes Solms-Laub) on the control of eutrofication and plant damage with irrigation water contamination, its ability to remove the nutrients such as nitrogen and phosphrus was studied. The overall results are summarized as follow. 1. It was possible to cultivate water hyacinth for 4 month from June to the middle of October in Suwon. 2. The number of plant was increased from 1,320 to 50,600 for 4 months, and total amounts of N, P, K removed from Seo-Ho by water hyacinth were 78.3, 64.2 and 152.4 kg/10a, respectively. 3. EC and $NH_4-N$ contents were lower at water hyacinth treatment than non-treatment and monthly variation of those contents were decreased until August. 4. With the cultivation of water hyacinth in animal waste water in vinyl plastic house, pH, EC, COD and concentrations of $NH_4-N$ and $PO_4-P$ in the water were drastically decreased. 5. Nitrogen contents absorbed from waste water existed in the order of leaf > stem > root but those of phosphorus root > stem > leaf.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.18 no.2
• /
• pp.167-174
• /
• 2012

Transport of marine debris between countries is a potential source of diplomatic conflicts. U-i Island in Shinan County, Jeonnam Province has been reported by media as being damaged by marine debris from foreign countries. However, scientific researches on those marine debris have not been published. So, the features of foreign marine debris on Seongchon Beach in U-i Island were surveyed on Feb. 2012. The ratio of marine debris from foreign countries was 34.7% by number of items, 56.3% by weight, and 48.5% by volume in $200m^2$ transacts. Most of them, 98.9% in number, were inferred to be originated from China. The most abundant items were plastic beverage bottles and black floats. The total number of black floats was 539 within the 1,100m beach. Fifteen of them had information on manufactured locations, of which 87.6% were Liaoning Province in northern China. As domestic policy cannot prevent the inflow of the marine debris from foreign countries, countermeasures should be sought out from the international cooperation with the neighboring countries. For the black floats, recycling method should be developed as lots of the same types of black floats are drifted ashore in winter. And, as the U-i Island is a National Park with its valuable natural heritages, methods should be designed to minimize impacts on dune topography and ecology.

• Food Science and Biotechnology
• /
• v.15 no.1
• /
• pp.63-69
• /
• 2006

The primary objective of this study is to determine whether a diet supplemented with brown rice koji (BRK) results in a reduced stress response in rats and mice. BRK, which has been suggested as a candidate for use as a stress- and fatigue-fighting supplement, was compared with red ginseng extract (RG) for its stress-reducing potential. The animals in this study were divided into no-stress, stress, RG, and BRK groups of 8 to 10 animals each. Stress was induced by means of immobilization (being restrained in plastic tubes for 30 min and electroshock (0.5 mA in mice or 2 mA in rats for 5 min). The no-stress group was not exposed to stress. Rats in the RG group received oral doses of 200 mg RG extract/kg body weight daily. The BRK group was fed a 30% BRK diet and exposed to stress. Animals were given supplements for 7 days before being exposed to stress, and then were given supplements for 5 days with exposure to stress. When the stress exposure ended, the animals were observed for stress-related changes in behavior and their plasma corticosterone levels were measured. BRK supplementation was associated with a partial blockade of the effects of stress on locomotion and elevated plus-maze test results in rats and mice. It was also associated with a partial reduction in stress-induced behaviors such as freezing, burrowing, smelling, face-washing, and rearing. BRK supplementation did not have a significant effect on plasma corticosterone levels, which were increased in the animals exposed to stress (p<0.01). The mice in the RG group received RG in water (2 mg RG/ mL $H_2O$), and the BRK group received a 30% BRK diet (weight) for 7 days. Both groups were evaluated for signs of fatigue. BRK supplementation increased endurance, as indicated by time on the rota-rod, in cold water, and on the horizontal wire. These results suggest that BRK supplementation partially protects the animal from the effects of stress and may also contribute to resistance to fatigue on physical exertion.

• Journal of International Society for Simulation Surgery
• /
• v.2 no.1
• /
• pp.26-32
• /
• 2015

Purpose When a surgeon examines the morphology of skull of patient, locations of craniometric landmarks of 3D computed tomography(CT) volume are one of the most important information for surgical purpose. The locations of craniometric landmarks can be found manually by surgeon from the 3D rendered volume or 2D sagittal, axial, and coronal slices which are taken by CT. Since there are many landmarks on the skull, finding these manually is time-consuming, exhaustive, and occasionally inexact. These inefficiencies raise a demand for a automatic localization technique for craniometric landmark points. So in this paper, we propose a novel method through which we can automatically find these landmark points, which are useful for surgical purpose. Materials and Methods At first, we align the experimental data (CT volumes) using Frankfurt Horizontal Plane (FHP) and Mid Sagittal Plane(MSP) which are defined by 3 and 2 cranial landmark points each. The target landmark of our experiment is the anterior nasal spine. Prior to constructing a statistical cubic model which would be used for detecting the location of the landmark from a given CT volume, reference points for the anterior nasal spine were manually chosen by a surgeon from several CT volume sets. The statistical cubic model is constructed by calculating weighted intensity means of these CT sets around the reference points. By finding the location where similarity function (squared difference function) has the minimal value with this model, the location of the landmark can be found from any given CT volume. Results In this paper, we used 5 CT volumes to construct the statistical cubic model. The 20 CT volumes including the volumes, which were used to construct the model, were used for testing. The range of age of subjects is up to 2 years (24 months) old. The found points of each data are almost close to the reference point which were manually chosen by surgeon. Also it has been seen that the similarity function always has the global minimum at the detection point. Conclusion Through the experiment, we have seen the proposed method shows the outstanding performance in searching the landmark point. This algorithm would make surgeons efficiently work with morphological informations of skull. We also expect the potential of our algorithm for searching the anatomic landmarks not only cranial landmarks.