• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2004년도 추계학술대회
• /
• pp.365-371
• /
• 2004

Generally, fracture of a material is influenced by plastic zone size developed near the crack tip. Hence, according to the relative size of plastic zone in the material, the mechanics as a tool for analyzing the fracture process are classified into three kinds, that is, Linear Elastic Fracture Mechanics, Elastic Plastic Fracture Mechanics, Large Deformation Fracture Mechanics. Even though the plastic zone size is such an important parameter, the practical measurement techniques are very limited and the one for in-situ measurement is not virtually available. Therefore, elastic-plastic FEA has been performed to estimate the plastic zone size. In this study, it is noticed that side necking at the surface is a consequence of plastic deformation and lateral contraction and the relation between the plastic zone and side necking is investigated. FEA for modified boundary layer models with finite thickness, various mode mixities $0^{\circ}$, $30^{\circ}$, $60^{\circ}$, $90^{\circ}$ and strain hardening exponent n=3, 10 are performed. The results are presented and the implication regarding to application to experiment is discussed.

• Journal of Welding and Joining
• /
• 제7권4호
• /
• pp.38-45
• /
• 1989

In this study, in order to evaluate the shape and the size of the plastic zone at the notch tip before stable crack growth, a newly developed technique for plastic strain measurement, that is, the recrystallization-etching technique was applied to observe the intense strain zone at the notch tip of weld HAZ. 1) The recrystallized specimens showed that the amount of the intense strain zone, more than 20% plastic zone, was quantitatively observed as the plane strain state during the growth of the plastic zone. 2) The behavior of plastic deformation at midsection are different for parent and weld HAZ. In addition, the micro crack initiation occurs at midsection, parent and weld HAZ when the crack opening displacement(COD) value is .delta.$_{t}$=0.4mm. 3) The plastic zone for parent proceeds in the forward direction at notch tip and for weld HAZ in the right and left direction at the notch tip. 4) The relation between plastic strain energy(Wp) and COD(.delta.$_{t}$) depended on yield stress, gradient and plastic strain size.ize.

• Journal of Welding and Joining
• /
• 제10권1호
• /
• pp.43-51
• /
• 1992

The plastic zone formed around a notch tip is important in analyzing the fracture toughness of structures and particularly weld cracks existed in the weld HAZ (heat affected zone) which produces local plastic deformation at the crack tip. Therefore, in order to analyze the fracture toughness in weld HAZ, it is necessary to investigate the new fracture toughness parameter $K_{c}$ $^{*}$ and critical plastic strain energy $W_{p}$ $^{c}$ according to the shape and size of the plastic zone. 1) If the temperature corresponding to $K_{c}$ $^{*}$=130kg-m $m^{-3}$ 2/ is determined, transition temperature $T_{tr}$ the magnitude of plastic zone size, and heat input change depending on the fracture toughness. The blunted amounts of the parent and weld HAZ show mild linear variation until .delta.=0.4mm and then increase very steeply there after. 2) The relation between the plastic strain energy( $W^{p}$ ) and transition temperature( $T_{*}$tr) in parent metal is more sensitive than that of weld HAZ. However, the plastic strain energy depends on the transition temperature, and thus the yield stress, .sigma.$_{ys}$ becomes an important parameter for plastic strain energy. 3) The critical plastic strain energy( $W_{p}$ $^{c}$ ) absorbed by the plastic zone at the notch tip indicated in case of parent metal: 60J/mm, in case of heat input(20KJ/cm): 75J/mm, in case of heat input(30KJ/cm); 50J/mmJ/mm.

• Computers and Concrete
• /
• 제17권1호
• /
• pp.107-127
• /
• 2016

Concrete is a heterogeneous material containing many weaknesses such as micro-cracks, pores and grain boundaries. The crack growth mechanism and failure behavior of concrete structures depend on the plastic deformation created by these weaknesses. In this article the non-linear finite element method is used to analyze the effect of presence of micro pore near a crack tip on both of the characteristics of crack tip plastic zone (its shape and size) and crack growth properties (such as crack growth length and crack initiation angle) under pure shear loading. The FE Code Franc2D/L is used to carry out these objectives. The effects of the crack-pore configurations and the spacing between micro pore and pre-excising crack tip on the characteristics of crack tip plastic zone and crack growth properties is highlighted. Based on the obtained results, the relative distance between the crack tip and the micro pore affects in very significant way the shape and the size of the crack tip plastic zone. Furthermore, crack growth length and crack initiation angle are mostly influenced by size and shape of plastic zone ahead of crack tip. Also the effects of pore decrease on the crack tip by variation of pore situation from linear to perpendicular configuration. The critical position for a micro pore is in front of the crack tip.

• 동력기계공학회지
• /
• 제13권4호
• /
• pp.43-48
• /
• 2009

The purpose of this study is to show how to eliminate the noises and to obtain the data related with the relationship between AE signal characteristics and mechanical behaviors for the pressure vessel steel. Various kinds of noises are introduced into the AE data in the course of experiments. Accordingly, real AE data have to be obtained after tests. AE test was carried out under four point bending load. Among AE signals, counts and signal strength are used to find out the differences of AE characteristics between the basemetal and weldment. After tests, this paper shows the procedures of filtering the noises against basemetal of the pressure vessel steel to obtain the real data around crack tip. Relationships between plastic zone size and cumulative AE counts are shown also. AE signals were absent within an elastic region, regardless of the specimens. Most of AE signals are produced in the process of plastic deformation. The deformation and fracture modes of basemetal and weldment are quiet different.

• 한국안전학회지
• /
• 제2권3호
• /
• pp.21-27
• /
• 1987

The effect of plastic deformation in an interfacial crack is considered. Yield zones are assumed to have the form of a strip along the interface. The crack is subjected to mode III loads at infinity and lies along the interface of two semi-infinite planes with different material properties. The size of the yield zones, the relation between the size of the yield zone and CTOD are obtained in a closed form solution. The J integral also can be obtained in a closed form Solution.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2004년도 추계학술대회
• /
• pp.359-364
• /
• 2004

In this study, experiments were tried on the mixed-mode I+II single overloading model which changes the loading mode of overload and fatigue load. Aspects of deformation field in front of the crack which is formed by mixed-mode I+II single overloading were experimentally studied. Then the shape and size of mixed-mode plastic zone were approximately calculated. The propagation behavior of fatigue crack was examined under the test conditions combined by changing the loading mode. The behavior of fatigue cracks were greatly affected by shapes of plastic deformation field and applying mode of fatigue load. Accuracy of prediction and evaluation for fatigue life may be improved by considering all aspects of deformation and behavior of fatigue cracks.

• 한국재료학회지
• /
• 제16권1호
• /
• pp.68-74
• /
• 2006

2024 Al alloys were severely deformed by equal channel angular pressing(ECAP) to obtain an ultrafine grain structure. The more deformation amount increased, the more grain size decreased. Most of the grain structure were changed from elongated to equiaxed shape with increasing pass number. The morphology of S' phases was also changed from rod-type to spherical type. The grain size of 6 passed specimen was 100 to 200 nm, and the size of S' phases was about 10 nm in the microstructure. XRD measurements have revealed that the texture formed by plastic deformation disappeared in the 6 passed specimen. SP test results described that the start of crack propagation occurred at the transition zone between plastic bending and membrane stretching because of small elongation. The maximum strength of ECA pressed specimen increased 1.9 GPa to 2.9 GPa with increasing pass number.

• 비파괴검사학회지
• /
• 제29권5호
• /
• pp.473-478
• /
• 2009

본 연구에서는 비파괴법을 이용하여 압력용기 강 다층용접부에서 채취한 표준 샤르피 시험편의 균열선단에서 형성되는 소성변형 거동을 평가하였다. 모재, 후열처리재 및 용접재를 대상으로 시험편에 기계적인 노치를 가공한 후 예균열(pre-crack)을 낸 다음 4점 굽힘실험과 음향방출(acoustic emission: AE)실험을 동시에 실시하였다. 균열선단은 용접재외 후열처리재의 경우 용융선 근처에 위치하도록 하였다. 하중이 가해짐에 따라 균열선단에서 형성되는 소성영역의 크기는 응력확대계수를 이용하여 구했으며, 각 시험편에 대한 소성역의 크기와 음향방출 특성과의 관계는 축적된 AE 에너지 관점에서 고찰하였다. 시험편에 관계없이 탄성역역에서는 거의 AE신호가 감지되지 않았으며, 대부분의 AE신호는 소성변형 과정에서 발생하였다. 또한, 용접재가 모재와 후열처리재에 비해 AE신호가 훨씬 많이 발생하였다. 모재와 후열처리재 및 용접재의 균열선단에서 소성영역 크기와 축적된 AE에너지와의 관계는 현저히 다르게 나타났으며, 용접재의 AE counts는 모재와 후열처리재에 비해 많이 발생하였다.

• 대한기계학회논문집
• /
• 제10권1호
• /
• pp.25-33
• /
• 1986

본 연구에서는 선단요소 해법의 방법을 토대로 소형컴퓨터를 위한 비선형 유한요소의 개발을 시도한 것이다. 주로 참조한 선단요소 해법의 프로그램은 Hinton과 Owen이 작성한 프로그램이며 원판메모리를 최대로 활용하여, 활동변수를 최소화 시키므로써, 실제 소형컴퓨터인 HP-3000II(512KB) 컴퓨터에서 총 자유도가 1000정도 되는 유한요소까지는, 해석이 가능하도록 만들어지게 되었다. 이와같이 완성된 프로그램의 응용성과 신뢰성을 검토해 보기 위해서 표준 CT 시편의 유한요소 를 작성하여(124 element, 428 node, 941 freedom) 크랙선단에 형성되는 소성역의 형상과 소성변형 크기를 수치적으로 추적하여 본 결과, 실험결과와 매우 잘 일치함을 볼 수 있어서 프로그램의 신뢰성을 확인 할 수 있었다. 이때 실험은 SUS-304스테인 레스강단의 소성역을 형성시킨다음, 재결정 방법에 의해 소성역의 형상과 크기를 가시 화 및 정량화 하여서 계산결과와 비교 하였다.