• Archives of Craniofacial Surgery
• /
• v.9 no.2
• /
• pp.90-92
• /
• 2008

Purpose: Congenital upper eyelid defect is rare anomaly whether it is compared with syndromic anomaly or not. It has many clinical manifestation in the extent, location. Many operation procedures such as simple closure, semicircular rotation flap, Cutler Beard procedure, lower lid rotation flap, etc can be used to reconstruct eyelid defects. We intend to introduce a simple, congenital eyelid defect which was not compared with syndromical anomaly, ophthalmic complication. Methods: Our experience is a case of 19 years old female who had a upper eyelid coloboma without any other anomalies. we could not find any skeletal deformity in orbital CT scan. she had no ophthalmic problem. we reconstructed the defect with bilateral marginal flap after deepithelization of supramarginal area and tarsal reposition. Results: There were no visible deformity of lid lining. postoperative scar was favorable. satisfactory results were obtained in cosmetic and functional aspects. Conclusion: Upper lid coloboma without other anomalies is rare. we obtained satisfactory outcome as treated this rare case with marginal flap advancement.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.19 no.1
• /
• pp.15-24
• /
• 1997

The principle of guided tissue regeneration (GTR), as applied to bone healing, is based on the prevention of connective tissue from entering the bony defect during the healing phase. This allows the slower bone producing cells to migrate into and reproduce bone within the defect. GTR has demonstrated a level of success in regenerating bone defect. Several types of membrane barrier have been utilized to apply this principle in bone regeneration. The purpose of this study was to evaluate whether improved bone regeneration can be achieved with different membrane barriers ($Gore-Tex^{TM}$membrane, $COLLACOTE^{(R)}$). In the 10 NewZealand white rabbits, full-thickness bone defects on three sites of each rabbit calvaria were made. Experimental group 1 was covered with $COLLACOTE^{(R)}$, and group 2 was covered with $Gore-Tex^{TM}$membrane. Macroscopic, microscopic examinations were made serially on 1, 2, 3, 6, 12 weeks after operation. The results were as follows : 1. Macroscopically, both of experimental group 1, 2 were filled with bone-like mass but the defects of experimental group 1 disclosed markedly thinner than the original bone. 2. Microscopically, the defect of experimental group 1, 2 was filled with bony trabeculae without infection and adverse reaction. But multinucleated giant cell infiltration around $COLLACOTE^{(R)}$ was seen till 6th week. 3. Resorption of $COLLACOTE^{(R)}$ started from 3rd week and it was completely resorped on the 12th week.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.34 no.6
• /
• pp.377-383
• /
• 2012

Purpose: The aim of this study was to evaluate the effect of 4-hexylresorcinol and hydroxyapatite combination graft on bone regeneration in the rabbit calvarial defect model. Methods: Ten New Zealand white rabbits were used for this study. Bilateral round shaped defects (diameter: 8.0 mm) were created on the parietal bone. 4-hexylresorcinol and hydroxyapatite combination graft material was grafted into the right parietal bone defect area (experimental). The left bone defect area was not filled with anything (control). The animals were sacrificed at 4 weeks and 8 weeks after grafting. A micro-computerized tomography of each specimen was taken, and the specimens were stained for histological analysis. Results: The average value of bone mineral density (BMD) and Bone volume (BV) was higher in the experimental group than in the control group at 4 weeks and 8 weeks after surgery. However, the difference was not statistically significant (P>0.05) at 8 weeks after grafting. The BMD and BV in the experimental group at 4 weeks after surgery was significantly higher than those in the control group (P<0.05). Conclusion: 4-hexylresorcinol and hydroxyapatite combination graft material showed higher initial bone formation than the control, however, there was no difference at 8weeks after operation.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.21 no.2
• /
• pp.110-119
• /
• 1999

The principle of guided tissue regeneration (GTR), as applied to bone healing, is based on the prevention of connective tissue from entering the bony defect during the healing phase. This allows the slower bone producing cells to migrate into and reproduce bone within the defect. The principle of guided tissue regeneration has demonstrated a level of success in regenerating bone defect. Several types of membrane barrier, each one with distinct properties, have been utilized to apply this principle in bone regeneration. The purpose of this study is to introduce and discuss the attributes of rubber dam as a barrier membrane and evaluate whether improved bone regeneration can be achieved by GTR using rubber dam. In the 15 New Zealand white rabbits, full-thickness bone defects on three sites of each rabbit calvaria were made. Non membrane group served as a control and experimental group 1 was covered with rubber dam and group 2 covered with Gore-Tex$^{TM}$ membrane. Macroscopic, radiographic, microscopic examinations were made serially on 1, 2, 3, 6, 12 weeks after operation. The results were as follows: 1. Macroscopically, the control site was collapsed and filled with connective tissue throughout the experimental period. But the defects of experimental groups 1 and 2 were filled with bone-like mass and showed the hard consistency on palpation. 2. Radiographically, the early new bone formation appeared similarly from the host bone in groups 1 and 2. 3. Microscopically, there were much connective tissue at the central part of control site but the defect of group 1 and 2 was filled with the mature bony trabeculae on the 12th week. This results suggest that rubber dam can be effectively used as a barrier membrane for guided bone regeneration.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.21 no.1
• /
• pp.1-12
• /
• 1999

The purpose of this study was to evaluate the healing process of the calvarial defect filled with hydroxylapatite(HA) and $TGF-{\beta}$ in Rat. 72 Sprague-Dawly rats were divided into 3 groups, control and two experimental groups. Bony defect were artificially prepared in the calvaria of all 72 rats and followed by implantation of HA (experimental group of 24 rats) and HA+$TGF-{\beta}$(another experimental group of 24 rats) into the defects. Sequential sacrifice was performed at 1, 2, 4, 6, 8, 12 weeks of experiment. Obtained specimen was stained with Hematoxylin and Eosin, Masson's Trichrome and Immunohistochemistry. The results were as follows, 1. Granulation tissue was prominent on control group in 1 and 2 weeks. Bony defects were filled with dense fibrous tissue through the whole experimental period and osteoinduction could not be observed in all groups. 2. Inflammatory cell infiltration was prominent on control group in 1 and 2 weeks and osteoclastic activity was high in HA implanted experimental group at 1 and 2 weeks. 3. Inflammatory cell infiltration was less and maturation of fibrous tissue could be found on HA+$TGF-{\beta}$ implanted experimental group at 1 and 2 weeks. 4. Osteoconduction activity was high in HA+$TGF-{\beta}$ implanted experimental group at 2 and 4 weeks but there was no difference after 6 weeks among 3 groups. 5. In grafted site of HA+$TGF-{\beta}$ implanted group, osteonectin expression was slightly increased from 1 week to 6 weeks. In the host site, it was increased from 1 to 4weeks. 6. In grafted site of HA+$TGF-{\beta}$ implanted group, osteocalcin expression was high at 4 weeks. In the host site, we could find the difference among 3 groups. From above results, the HA with mixture of $TGF-{\beta}$ has the potentiality of promoting bone formation in the bony defect area in the rat.

• Archives of Plastic Surgery
• /
• v.34 no.5
• /
• pp.663-666
• /
• 2007

Purpose: Autologous fat injection into the facial area is a frequently used technique in aesthetic plastic surgery for augmentation of the soft tissue. Fat injection is a very safe procedure because of the advantage of being autologous tissue. Minimal foreign body reaction or infections are noted after fat injection. However, there may be some complications including those as severe as blindness. There have been some case reports on visual disturbances after autologous fat injection reported in the literature. Methods: A 21-year-old female patient underwent autologous fat injection into left eyebrow area to correct depression of soft tissue. Immediately after injection of autologous fat, she complained sudden visual loss on the left eye. She had come to our emergency room and ophthalmologic evaluation showed that the patient could only recognize hand motion. There was no abnormality of the optic nerve on magnetic resonance imaging. Suspecting an ischemic optic neuritis from fat embolism of the central retinal artery, the patient was treated conservatively with occular massage, antiglaucomatic agent, anti-inflammatory drugs and antibiotics. Visual field examination showed visual defect of half the lower hemisphere. Results: While maintaining antiglaucomatic agents and non steroidal anti inflammatory drugs, fundoscopic examination showed no abnormalities on the second day of admission. Visual field examination showed an improvement on the fourth day along with decreased eyeball pain. Significant improvement of vision was noted and the patient was discharged on the fifth day of admission. The patient was followed-up 2 days afterwards with improved vision and visual field defect. Conclusion: We describe an unusual case of sudden unilateral visual disturbance following autologous fat injection into periorbital area.

• Archives of Plastic Surgery
• /
• v.38 no.6
• /
• pp.733-739
• /
• 2011

Purpose: Cellulose is a natural substance from plants or bacteria. It is known that bacterial synthesized cellulose has an effect of wound healing. The aim of this study is to show the effect of bacterial synthesized cellulose from citrus on wound healing. Methods: Three full-thickness skin defects were made on the back of Sprague-Dawley rats. Three wounds were treated by vaseline gauze (Group V), Algisite $M^{(R)}$ (Group A) and bacterial synthesized cellulose from citrus (Group C) was used for dressing on skin defect on rats. We analyzed the gross, histological and biochemistry finding. Results: Group C showed more decrease of wound size compared to Group V (33% versus 7.2%) after 14 days. The histologic findings revealed Group C and Group A preceed the process of wound healing rather than Group V (More rapid collagen deposition and neovascularization and reduced inflammation). Also, the expressions of vascular endothelial growth factor (VEGF) and transforming growth factor (TGF)-${\beta}1$ were increased in the Group C and Group A compared with the Group V in 7 days. VEGF and TGF-${\beta}1$ expression were decreased in the Group C and Group A in 14 days, however Group V was not decreased at 14 day because of delayed wound healing process. Conclusion: Bacterial synthesized cellulose from citrus affects wound healing by reducing the inflammatory stage. And stimulates wound contracture by the deposition of extracellular matrix, thus preventing the formation of chronic wounds.

• Archives of Plastic Surgery
• /
• v.39 no.5
• /
• pp.477-482
• /
• 2012

Background The bone graft for the alveolar cleft has been accepted as one of the essential treatments for cleft lip patients. Precise preoperative measurement of the architecture and size of the bone defect in alveolar cleft has been considered helpful for increasing the success rate of bone grafting because those features may vary with the cleft type. Recently, some studies have reported on the usefulness of three-dimensional (3D) computed tomography (CT) assessment of alveolar bone defect; however, no study on the possible implication of the cleft type on the difference between the presumed and actual value has been conducted yet. We aimed to evaluate the clinical predictability of such measurement using 3D CT assessment according to the cleft type. Methods The study consisted of 47 pediatric patients. The subjects were divided according to the cleft type. CT was performed before the graft operation and assessed using image analysis software. The statistical significance of the difference between the preoperative estimation and intraoperative measurement was analyzed. Results The difference between the preoperative and intraoperative values were $-0.1{\pm}0.3cm^3$ (P=0.084). There was no significant intergroup difference, but the groups with a cleft palate showed a significant difference of $-0.2{\pm}0.3cm^3$ (P<0.05). Conclusions Assessment of the alveolar cleft volume using 3D CT scan data and image analysis software can help in selecting the optimal graft procedure and extracting the correct volume of cancellous bone for grafting. Considering the cleft type, it would be helpful to extract an additional volume of $0.2cm^3$ in the presence of a cleft palate.

• Journal of the Korean Society for Precision Engineering
• /
• v.16 no.12
• /
• pp.168-173
• /
• 1999

It is investigated that internal defect of planetary gear which consists of two gears with different number of teeth on both side. The internal defect, central burst, begin to form at the place of adiabatic shear band which usually has maximum ductile fracture value during the forming operation, forward and backward extrusion. It makes the plastic forming of planetary gear difficult. The prediction of defect to minimize the cost to produce the planetary gear. The finite element simulation code DEFORM is applied to analyze the defects. In the analysis, the toothed gears are assumed as axisymmetric cylinders whose diameters are equal to those of pitch circles of the each gears. Experiments were carried out with the SCM415 alloy steel as billet material and AIDA 630-ton knuckle-joint press. The calculated results and experimental inspections are compared to design a die and blank without defects and the results are useful to predict the internal defect.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2021.10a
• /
• pp.290-291
• /
• 2021

Defects in the coating process of plastic automotive components are caused by various causes and phenomena. The correlation between defect occurrence rate and meteorological and environmental conditions such as temperature, humidity, and fine dust was analyzed. The defect rate data categorized by type and cause was collected for a year from a automotive parts coating company. This data and its correlation with environmental condition was acquired and experimented by machine learning techniques to predict the defect rate at a certain environmental condition. Correspondingly, the model predicted 98% from fine dust and 90% from curtaining (runs, sags) and hence proved its reliability.