• Advances in nano research
• /
• 제3권3호
• /
• pp.133-141
• /
• 2015

Influence of Ag nanoparticles on optical and photovoltaic properties of, silicon substrates, silicon solar cells and glass have been investigated. Silver nanoparticles have been fabricated by evaporation of thin Ag layers followed by the thermal annealing. The surface plasmon resonance peak was observed in the absorbance spectrum at 470 nm of glass with deposited silver nanoparticles. It is demonstrated that deposition of silver nanoparticles on silicon substrates was accompanied with a significant decrease in reflectance at the wavelength 360-1100 nm and increase of the absorption at wavelengths close to the band gap for Si substrates. We studied influence of Ag nanoparticles on photovoltaic characteristics of silicon solar cells without and with common use antireflection coating (ARC). It is shown that silver nanoparticles deposited onto the front surface of the solar cells without ARC led to increase in the photocurrent density by 39% comparing to cells without Ag nanoparticles. Contrary to this, solar cells with Ag nanoparticles deposited on front surface with ARC discovered decrease in photocurrent density. The improved performance of investigated cells was attributed to Ag-plasmonic excitations that reduce the reflectance from the silicon surface and ultimately leads to the enhanced light absorption in the cell. This study showed possibility of application of Ag nanoparticles for the improvement of the conversion efficiency of waferbased silicon solar cells instead of usual ARC.

• 한국광학회지
• /
• 제28권6호
• /
• pp.361-365
• /
• 2017

본 논문은 협대역의 플라즈모닉 흡수체 구현을 위한 금속 나노입자 주기구조 설계 및 제작에 관한 연구다. 제안된 플라즈모닉 흡수체의 상단 금속 나노입자는 주기적으로 홈이 파여있는 템플릿을 이용하여 전자빔 증착 후, 열처리하는 제작 기술로 형성하였다. 주기적 홈 템플릿 위에 제작된 금속 나노입자를, 따로 제작한 33 nm 두께의 $Al_2O_3$가 스퍼터 가공된 200 nm 두께의 금속 반사판-기판 상단에 옮기는 방법을 통해 플라즈모닉 흡수체를 제작하였다. 제작된 금속 나노입자는 평균 지름 46 nm, 주기 76 nm의 크기를 가졌다. 광학 측정 결과, 제작된 플라즈모닉 흡수체는 중심파장 572 nm, 반값전폭 109.9 nm의 플라즈모닉 공명 흡수를 나타내었다.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2015년도 제49회 하계 정기학술대회 초록집
• /
• pp.228.1-228.1
• /
• 2015

We demonstrate a simple route to hybridize two different nanomaterials by using three-dimensional nanodishes that can be used as small plasmonic containers to host guest nanoparticles. Our nanodishes were fabricated using nanoimprint lithography and oblique-angle film deposition, and the guest nanoparticles were drop-casted onto the host nanodishes. Based on the proposed method, colloidal Au nanoparticles were assembled inside Au nanodishes in the form of a labyrinth. These Au nanoparticle-nanodish hybrids excited a strong surface plasmon resonance, as verified by a numerical simulation of the local field enhancement and by direct observation of the enhanced Raman signals. Our results point to the potential of the nanodishes as a useful platform for combining diverse nanomaterials and their functionalities.

• 한국고분자학회지:고분자과학과기술
• /
• 제25권3호
• /
• pp.232-238
• /
• 2014

• ETRI Journal
• /
• 제36권4호
• /
• pp.654-661
• /
• 2014

We develop accurate finite-difference time-domain (FDTD) modeling of polymer bulk heterojunction solar cells containing Ag nanoparticles between the hole-transporting layer and the transparent conducting oxide-coated glass substrate in the wavelength range of 300 nm to 800 nm. The Drude dispersion modeling technique is used to model the frequency dispersion behavior of Ag nanoparticles, the hole-transporting layer, and indium tin oxide. The perfectly matched layer boundary condition is used for the top and bottom regions of the computational domain, and the periodic boundary condition is used for the lateral regions of the same domain. The developed FDTD modeling is employed to investigate the effect of geometrical parameters of Ag nanospheres on electromagnetic fields in devices. Although negative plasmonic effects are observed in the considered device, absorption enhancement can be achieved when favorable geometrical parameters are obtained.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2014년도 제46회 동계 정기학술대회 초록집
• /
• pp.318.1-318.1
• /
• 2014

Metal nano-crystals have been received much attentions owing to their excellent catalytic property and surface plasmon effect. In the last decade, many studies on synthesizing well-dispersive nanoparticles and on understanding their distinct physical properties have been performed. There were tremendous reports revealing the electrochemical activities and enhancement of surface plasmonic effect were dependent mainly on the size, shape, and composition. So far, most fabrication methods have been based on vacuum based deposition techniques, such as chemical vapor deposition and electron-beam evaporation, and then annealed them to transform into the nanoparticles. Recently, there were several reports regarding to the photoinduced nano-crystal synthesis as an effective way to produce the metal nanoparticles. In this study, we report synchrotron x-ray mediated synthesis of Au nanoparticles on ZnO nanowires. ZnO nanowires were fabricated by hydrothermal method, and then they were dip into a solution having Au clusters. Detailed structural evolution of Au nanoparticles was investigated using scanning electron microscopy and photoluminescence measurements. The results on formation of well-dispersive Au nanoparticles on ZnO nanowires will be presented.

• 마이크로전자및패키징학회지
• /
• 제29권1호
• /
• pp.55-59
• /
• 2022

본 논문에서는 플라즈몬 공명 현상을 통하여 나노 입자 주변의 전기장을 증폭시키며, 흡광률을 높일 수 있는 구조를 시간영역 유한차분(FDTD)시뮬레이션을 이용하여 나노입자를 평면에 배열하였을 때와 비교하여 나노 구조에 배열하였을 때의 전기장과 흡광도를 비교하였다. 또한 나노구조의 폭을 240 nm ~ 300 nm로 조절하여 입자간의 간격이 좁을수록 광 흡수율이 높음을 보이고자 하였다. 또한 UV 임프린트를 통하여 나노 입자와 나노 구조를 표면에 함께 형성시키는 방법에 대한 연구를 진행하였다. 해당 구조에 입자를 형성하기 위하여 스프레이 코팅을 이용하여 나노 입자를 구조 제작에 사용되는 몰드에 먼저 배열한 후, UV 임프린팅을 통해 제작하였고 나노구조와 입자가 함께 형성됨을 Scanning Electron Microscopy 로 확인하였다.

• 청정기술
• /
• 제26권4호
• /
• pp.251-256
• /
• 2020

The biocompatibility and plasmonic properties of Au nanoparticles make them useful for photothermal therapy, drug delivery, imaging, and many other fields. This study demonstrated a novel, facile, economic, and green synthetic method to produce gold nanoparticles. Gold nanoparticles (AuNPs) with spherical and triangular shapes were effectively synthesized using only Schisandra chenesis fruit extract as the capping and reducing agent. The shape of the AuNPs could be engineered simply by adjusting the molar concentration of HAuCl4 in the reaction mixture. The as-synthesized AuNPs were characterized using UV-VIS spectroscopy, transmission electron microscopy (TEM), X-ray diffraction (XRD), dynamic light scattering (DLS), and energy dispersive X-ray analysis (EDXA). This study revealed that by using the HAuCl4 concentration in the AuNP synthesis, the shape and size of the AuNPs could be controlled by the concentration of HAuCl4 and Schisandra chinensis fruit extract as a surfactant. The as-synthesized AuNPs samples had sufficient colloidal stability without noticeable aggregation and showed the predominant growth of the (111) plane of face-centered cubic gold during the crystal growth. The catalytic efficiency of the AuNPs synthesized using Schisandra chenesis fruit extract was examined by monitoring the catalytic reduction of 4-nitrophenol to 4-aminophenol using Ultraviolet-visible spectroscopy (UV-Vis spectroscopy). The synthesized AuNPs showed good catalytic activity to reduce 4-nitrophenol to 4-aminophenol, revealing their practical usefulness.

• 한국산학기술학회논문지
• /
• 제18권11호
• /
• pp.88-93
• /
• 2017

다양한 응용분야를 가진 국부적인 표면플라즈몬 공명 특성을 손쉽게 제어할 수 있는 기술 개발은 매우 중요하다. 또한, 금속 나노입자의 형태, 크기, 그리고 조합에 관한 세심한 조사는 공명특성과 금속 나노구조의 관계를 이해하는데 매우 유용하다. 본 논문은 블록공중합체 마이셀 박막필름으로부터 얻어진 금속나노입자 배열에 따른 국부적인 표면플라즈몬의 공명특성에 관한 연구이다. 우선 전통적인 방법의 블록공중합체 리소그라피를 통해 두 가지 다른, 점 형태 및 링 형태, 금 나노입자를 제조하였다. 그 다음 은거울 반응을 통하여 금 나노입자위에 은이 둘러 쌓이도록 금/은 이중금속 나노구조를 구현했다. 금속 나노 구조체 조절을 위해 에탄올 전처리, 은거울 반응 시간, 블록공중합체의 제거 유무 등의 공정변수를 변화시켰다. 초기 금 나노입자가 잘 제조된 경우 항상 금나노입자 표면에 적절히 은이 잘 형성되었고, 이는 UV-Vis 실험에서 각 금속나노 입자의 고유 플라즈몬 밴드인 금 525nm, 은 420nm에서 각각 나타났다. 하지만 최초 적은 양의 금 나노입자가 제조되었을 경우 은 도금 속도가 빨라져서, 초기 금 나노입자의 표면을 은이 완전히 덮었으며, 이는 UV-Vis 실험에서 금의 플라즈몬 밴드는 나타나지 않고, 은의 고유 플라즈몬 밴드만 420nm에서 나타났다. 블록공중합체로부터 미리 합성된 금나노입자 위에 은을 도금하는 방법은 국부적인 표면플라즈몬 특성을 면밀히 조사하는데 매우 유용하다.

• Applied Science and Convergence Technology
• /
• 제23권5호
• /
• pp.284-288
• /
• 2014

We present tapered nanostructures fabricated on a selective area of gallium phosphide substrates for advanced optoelectronic device applications. A lithography-free fabrication process was accomplished by dry etching of metal nanoparticles. Thermal dewetting of micro-patterned metal thin films provides etch masks for tapered nanostructures. This simple process also allows the formation of plasmonic surfaces with corrugated shapes. Rigorous coupled-wave analysis calculations provide design guidelines for tapered nanostructures on gallium phosphide substrates.