• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2018.06a
• /
• pp.63-63
• /
• 2018

본 연구는 플라즈마 전해 산화 (PEO) 및 RF (Radio Frequency) 스퍼터링을 이용한 2 단계 접근법에 의해 처리 된 MgO / Ni-Cr의 고내식성 이중층 코팅을 제조하기 위해 수행되었다. 이를 위해 $100mA/cm^2$ 교류 조건에서 180 s PEO를 한 후 150W 에서 900s RF 스퍼터링을 수행 하였다. 코팅의 형태는 주사전자현미경(SEM)을 사용하여 관찰되었으며 코팅의 상조성은 X-선 회절(XRD) 및 X-선 광전자 분광법(XPS)을 사용하여 분석하였다. SEM 이미지는 스퍼터링 된 Ni-Cr이 크랙의 대부분과 미세한 미세 공극을 덮어 코팅 결함이 감소함을 보여 주었다. 따라서, 코팅 된 샘플의 거칠기 값은 스퍼터링 공정 후에 감소되었다. 단면 이미지로부터, 스퍼터링된 코팅층은 낮은 두께 때문에 거의 검출되지 않았다. EDS, XRD 및 XPS를 사용한 조성 분석은 금속 상태의 형태로 Ni 및 Cr 존재를 나타내었고 XPS에서 NiCr2O4 부동태 피막이 검출되었다. MgO / Ni-Cr 이중층 코팅의 내부식성은 MgO / Ni-Cr 이중층을 가진 샘플의 금속 원소와 비교하여 우수한 부식 특성을 나타내는 전위 역학적 분극 시험 및 전기 화학적 임피던스 분광법으로 평가 하였다.

• 정보저장시스템학회:학술대회논문집
• /
• 2005.10a
• /
• pp.124-127
• /
• 2005

Rewritable optical memory devices such as an CD-RW and DVD+RW are data storage media, which take advantage of the different optical properties in the amorphous and crystalline states of phase change materials. The switching property, structural transformation, transformation kinetics and chemical bindings of $Ge_xSb_{100-x}$($6{\le}x{\le}$34) were studied to investigate the feasibility of applying $Ge_xSb_{100-x}$ alloys in optical memory. The $Ge_xSb_{100-x}$ thin film was deposited by RF magnetron co-sputtering system and phase change characteristics were investigated by X-ray diffraction (XRD), static tester, inductively coupled plasma atomic emission spectrometer (ICP-AES) and atomic force microscopy (AEM). Optimum fiim composition of $Ge_xSb_{100-x}$ was studied and its minimum time fur laser induced crystallization and optical contrast fur phase transition was performed. These results might be correlated with the binding energies between Ge and Sb, and indicate that $Ge_xSb_{100-x}$ have an potential far optical memory applications.

• Proceedings of the KIEE Conference
• /
• 1998.07e
• /
• pp.1761-1763
• /
• 1998

ITO(Iridium-Tin Oxide) thin film, as discharge electrodes in AC PDP, should have low resistivity and high transparency. Regarded as a high deposition rate method, the ITO thin film fabricated by the facing target sputtering system has been studied in this paper. The electrical property of the ITO film deposited below $150^{\circ}C$ is not satisfied. The SEM pictures show that the ITO films deposited below $150^{\circ}C$ are amorphous. After being annealed the amorphous ITO films become crystalline, and for this reason, the electrical property of amorphous ITO films can be effectively improved by annealing process. An ITO film with the resistivity as low as $1.99{\times}10^{-4}$ and transparency above 85% has be gotten after vacuum annealing at $300^{\circ}C$ for 2 hours while deposited at $75^{\circ}C$. The corresponding deposition rate is $220{\AA}/min$.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2016.11a
• /
• pp.103.1-103.1
• /
• 2016

플라즈마 코팅은 진공 및 진공에서 발생된 플라즈마 대기압 플라즈마를 이용하여 기판에 코팅하는 기술을 의미하는 것으로 최근 다양한 코팅 소스 및 물질계가 개발되면서 그 응용을 넓혀가고 있다. 플라즈마 코팅은 물리증착 및 화학증착에서 주로 이용하고 있는데 플라즈마를 이용하는 대표적인 기술로 스퍼터링과 음극아크증착, 플라즈마 화학증착 등이 있다. 스퍼터링은 기존의 마그네트론 스퍼터링에 비해 이온화율이 대폭 향상된 HIPIMS(High Power Impulse Magnetron Sputtering) 기술이 개발되면서 경질피막 제조의 신기술로 자리 잡고 있고 음극아크증착의 경우는 다양한 Filtered 아크소스가 개발되면서 후막 고경도 DLC(Diamond-like Carbon) 등 기존의 방법으로 달성할 수 없었던 코팅층의 제조가 가능하게 되었다. 최근 수명 및 물성이 크게 향상된 소재들이 다양하게 개발되었는데 이들 소재는 가공이 잘 되지 않는 난삭재가 대부분이어서 기존의 가공 Tool이 한계를 드러내고 있다. 이에 따라 난삭재 가공용 새로운 Tool에 대한 수요가 크게 증가하고 있는데 이에 대응하는 유력한 방법 중의 하나가 플라즈마를 이용한 경질코팅이다. 이렇듯 플라즈마 코팅은 난삭재가공용 Tool을 비롯하여 기계나 자동차 부품의 고경도, 저마찰 코팅, 기능성 코팅 등 다양한 분야에 응용을 확대하고 있다. 본 논문에서는 플라즈마 코팅의 최신 기술개발 동향과 그 응용에 대해 고찰하고자 한다.

• Journal of the Korean Ceramic Society
• /
• v.52 no.3
• /
• pp.224-227
• /
• 2015

In this work, the properties of Indium-Zinc-Tin-Oxide (IZTO) thin films, deposited on polyethylene naphthalate (PEN) with a $SiO_2$ buffer layer, were analyzed with different working pressures. After depositing the $SiO_2$ buffer layer on PEN substrates by plasma-enhanced chemical vapor deposition (PECVD), the IZTO thin films were deposited by RF magnetron sputtering with 1 to 7-mTorr working pressure. All the IZTO thin films show an amorphous structure, regardless of the working pressure. The best morphological, electrical, and optical properties are obtained at 3-mTorr working pressure, with a surface roughness of 2.112-nm, a sheet resistance of $8.87-{\Omega}/sq$, and a transmittance at 550-nm of 88.44%. These results indicate that IZTO thin films deposited on PEN have outstanding electrical and optical properties, and the PEN plastic substrate is a suitable material for display devices.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2008.06a
• /
• pp.426-426
• /
• 2008

ZnO 박막과 Al이 도핑된 ZnO 다결정질 박막을 rf magnetron sputtering 방법을 이용하여 Si(100) 기판과 코닝글라스 기판에 증착하여 박막의 광학적 특성을 Spectro-scopic Ellipsometry (SE, Woollam사)와 UV-VIR-NIR Sphectrophotometry (SP, Varian사)를 사용하여 분석하였다. SE 측정은 입사각도 55도에서 75도까지 5도 간격으로 파장범위 250 - 1700 nm 에서 3 nm 간격으로 측정하였으며, SP 측정은 수직입사로 250-3000 nm 파장범위에서 1 nm 간격으로 투과도와 반사도를 측정하였다. 측정된 데이터들은 Lorentz Oscillator 모델과 Drude free electron 모델이 결합된 분산관계식을 사용하여 전산 맞춤을 하여 분석하였다. ZnO 박막의 optical band gap energy 는 3.3 eV로 측정되었으며, Al 도핑에 따른 자유전하농도가 증가에 의하여 Burstein-Moss 효과에 따르는 optical band gap energy의 증가 거동을 보였다. 또한 자유전하농도 증가에 따라 band edge 부근에서 나타나는 excitonic transition 에 기인하는 유전함수 피크의 broadening이 관찰되었으며, high frequency dielectric constant는 자유 전하농도에 관계없이 3.689${\pm}$0.05 eV 의 값을 가졌다. Drude free electron 모델을 사용하여 plasma frequency를 구하고 이로부터 얻어진 optical mobility 와 Hall mobility를 비교하여 ZnO계 다결정질 박막에서의 결정립계가 이동도에 미치는 영향을 고찰하고자 한다.

• Journal of the Korean Vacuum Society
• /
• v.21 no.4
• /
• pp.212-218
• /
• 2012

The optical properties of AZO thin films prepared by the RF mangnetron sputtering system was studied to research the dependance of chemical properties of substrate. The substrate was the SiOC film deposited by Inductively coupled plasma chemical vapor deposition with various gas flow rate of $O_2$ and Ar (DMDMOS). In accordance with the increase of Ar gas flow rates, the Si-O bond in the SiOC film increased and then progressed the amorphism. The roughness of AZO grown on SiOC film with high degree of amorphism decreased and then improved the flatness of surfaces. Moreover, the ultra violet emission with high intensity was spontaneously induced in the AZO film growed on SiOC film with high degree of amorphism.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2003.10a
• /
• pp.118-118
• /
• 2003

In a rolling wire probe, a key component of an inspection apparatus for PDP electrode patterns, the electric performance of it is known to be strongly dependent on the surface condition of a collet pin, a needle pin, and a wire. However, the collet and needle pins rotate very rapidly in contact with each other, which results in the degradation of the surface by the heat and friction and finally the formation of black wear marks on the surface after a several hundred hours test. Once the black wear marks appear on the surface, the electric resistance of the probe increases sharply and so the integrity of the probe is severely damaged. In this experiment, TiN coating, which has excellent electric conductances and good wear-resistance, has been applied on the surface of collect and needle pins for preventing the surface damages. In order to achieve the homogeneous coating with a good adhesion property, special coating substrate stages and jigs were designed and applied during coating. TiN has been deposited using 99.999% Titanium target by a DC reactive sputtering method. According to the components and jigs, processing parameters, such as DC power, RF bias and the flow rate ratio of Ar and N$_2$ used as reactive gases, has been controlled to obtain good TiN films. Detailed problems and solutions for applying the new substrate stages and jigs will be discussed.

• Proceedings of the KIEE Conference
• /
• 2006.07c
• /
• pp.1440-1441
• /
• 2006

In this study, we synthesized CNTs(carbon nanotubes) on the glass substrate by microwave plasma enhanced chemical vapor deposition (MPECVD), Effect of bias voltage on the grown behavior and morphology of CNTs were investigated. Recently, it has been proposed that aligned CNTs can also be achieved by the application of electric bias to the substrate during growth, the first time reported the bias effect such that the nanotube alignment occurred only when a positive bias was applied to the substrate whereas no aligned growth occurred under a negative bias and no tube growth was observed without bias. On the country, several researchers reported some different observations that aligned nanotubes could also be grown under negative substrate biases. This discrepancy as for the effect of positive and negative bias may indicate that the bias effect is not fully understood yet. The glass and Si wafers were first deposited with TiN buffer layer by r.f sputtering method, and then Ni catalyst same method, The thickness of TiN and Ni layer were 200 nm and 60 nm, respectively. The main process parameters include the substrate bias (0 to - 300 V), and deposition pressure (8 to 20 torr).

• Proceedings of the KIEE Conference
• /
• 2005.07c
• /
• pp.1862-1864
• /
• 2005

Carbon nanotubes [CNTs] are grown on TiN-coated Si substrates at $700^{\circ}C$ by inductively coupled plasma-chemical vapor deposition (ICP-CVD). Pre-treatment of Ni catalysts has been performed using an RF magnetron sputtering system. Structural properties and field-emission characteristics of the CNTs grown are analyzed in terms of the RF power applied and the treatment time used in the pre-treatment process. The characterization using various techniques, such as FE-SEM, AFM, and Raman spectroscopy, show that the physical dimension as well as the crystal quality of CNTs are changed by pre-treatment of Ni catalysts. It is also seen that Ni catalysts with proper grain size and uniform surface roughness may produce much better electron emission. The physical reason for all the measured data obtained are discussed to establish the relationship between the structural property and the electron emission characteristic of CNTs.