• 대한소아치과학회지
• /
• 제32권4호
• /
• pp.611-619
• /
• 2005

본 연구의 목적은 초기 우식 병소에서 광원에 따른 형광효과를 비교하는 것으로 정량 분석형 laser/light 형광법(Quantitative laser/light-induced fluorescence, QLF)을 이용하여 아르곤 레이저광, 할로겐광, 발광다이오드광(LED), 플라즈마광의 형광효과를 비교하였다. 발거된 60개의 치아를 선정한 후, 인공우식용액에 노출되지 않을 부분에 nail varnish를 도포하였고 치아는 24, 48, 72시간 동안 인공우식용액에 보관되었다. 건조 후 QLF영상으로 초기 우식 부위의 광밀도 차이에 의한 탈회정도가 기록되었다. 또한 조영제를 이용하여 동일한 방법으로 실험하였고 다음과 같은 결과를 얻었다 염료를 이용하여 같은 방법으로 실험하여 또 다른 결과를 얻었다. 1. 각 군의 평균 광밀도를 볼 때, 플라즈마광이 세 군 모두에서 다른 광원들 보다 높았다(p<0.05). 2. 세 군 사이에서 평균 광밀도를 비교해 볼 때, 플라즈마광과 할로겐광이 차이를 보였다(p<0.05). 3. 조영제를 사용하였을 경우 평균 광밀도를 비교해 볼 때, 플라즈마광이 세 군 모두에서 다른 광원들보다 높았고 (p<0.05), 발광다이오드광(LED)와 아르곤 레이저광을 제외한 모든 광원이 차이를 보였다(p<0.05). 4. 조영제를 사용하지 않은 경우와 사용한 경우 평균 광밀도를 비교해 볼 때, 사용한 경우에 모든 광원의 평균 광밀도 차이가 컸다.

• 한국결정성장학회지
• /
• 제31권6호
• /
• pp.276-281
• /
• 2021

반도체 회로를 제조하기 위해서 에칭, 세척, 증착 등의 공정들이 반복적으로 진행된다. 따라서 이러한 공정이 진행되면 진공장비 내부는 부식성이 높은 가혹한 플라즈마 환경에 노출되게 된다. 따라서 반도체 공정 장비의 내부를 플라즈마 노출에 강한 재료를 사용하여 코팅층의 에칭과 오염 입자의 생성을 최소화하여야 한다. 본 연구에서는 고상합성법에 의해 Y₂O₃와 YF₃ 분말을 원료물질로 옥시불화이트륨(YOF)를 성공적으로 합성하였다. Y₂O₃와 YF₃ 분말의 혼합비율은 1.0:1.0에서 1.0:1.6까지 조절하였으며, 혼합비율이 합성된 YOF 분말의 결정구조와 미세구조에 미치는 영향을 XRD와 FE-SEM으로 조사하였다. 합성된 YOF 분말을 이용하여 알루미늄 기판에 플라즈마 스프레이법으로 성공적으로 코팅하였다.

• Journal of Photoscience
• /
• 제9권2호
• /
• pp.47-50
• /
• 2002

Raft is a distinctive membrane domain enriched in a certain class of lipids, cholesterol, and proteins observed on the plasma membrane. Growing evidence has revealed that such membrane domains play key roles in signal transduction, fertilization, development, transmitter release, and so on. Recently, we have isolated raft-like detergent-resistant membrane (DRM) fraction from bovine photoreceptor rod outer segments. Transducin and its effecter, cGMP-phosphodiesterase, elicited stimulus-dependent translocation between detergent-soluble membrane and DRM. This suggested potential importance of such distinct membrane domains in vertebrate phototransduction. Here, we will discuss physiological meaning of the translocation of major components of cGMP cascade to raft-like membrane in phototransduction. We would like to propose a hypothesis that raft-like membrane domains on the disk membrane are the place where cGMP cascade system could be quenched.

• 대한기계학회논문집A
• /
• 제20권7호
• /
• pp.2134-2140
• /
• 1996

This study was carried out to anlayze the heat-resistant characteristics of functionally gradient material(FGM) composed with ceramic and metal. The thermal fracture behavior of plasma-sprayed FGM and conventional coating material(NFGM) was exaimined by acoustic emession technique under heating and cooling. Furnace cooling and rapid cooling tests were used to examine the effect of temperature change under various conditions, respectively. At the high temperature above $800^{\circ}C$, it was shown that FGM gives higher thermal resistance compared to NFGM by AE signal and fracture surface analysis.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2000년도 춘계학술대회 논문집
• /
• pp.783-791
• /
• 2000

Increasing demands in productivity are propelling the development of new manufacturing methods like hard machining, high speed cutting (HSC) or machining of difficult to machine materials. In these processes the toois are subjected to very severe mechanical, tribological and thermal loads. They fail prematurely by abrasion, cratering, edge breakage and cold welding. The performance of such tools will be enhanced by better and more wear resistant coatings. The development of these new coatings shows a clear trend towards complex multi-component and multi-layer configurations. TiAIN multilayer coating belongs to these coatings for the new cutting tool generation. This paper tries to explain the benefits of the new coatings. TiAIN multilayer coating offers the following advantages: reduction of manufacturing costs. boost productivity, and lower coolant procurement, conditioning and disposal costs.

• 한국분말재료학회지
• /
• 제7권2호
• /
• pp.63-70
• /
• 2000

Thermal spray coating process has proven to be effective at producing hard, dense, wear resistance coatings on the relatively mild substrates. Among several spraying techniques, HVOF (High Velocity Oxygen Fuel) and plasma coating processes, which are preferentially used for the wear resistance application such as capstans, have been applied in this study. The effects of pre-treatment, it-process and post-treatment parameters on the wear and mechanical properties of WC+12%Co, Cr3C2 and Al2O3 powder coatings have been investigated and correlated with the microstructures. The results indicated that the carbide coating was more preferable to the oxide coatings and the post-treatments consisting of vacuum annealing and sealing on carbide coatings led to significant improvements in wear resistance, adhesive strength and coating phase stabilization over the other processing techniques in this application.

• The Plant Pathology Journal
• /
• 제17권1호
• /
• pp.29-35
• /
• 2001

Early infection process of Phytophthora capsici in pumpkin stems was similar in the compatible and incompatible interactions 24 h after inoculation. Intercellularly growing hyphae penetrated host parenchyma cells by growing hyphae penetrated host parenchyma cells by forming haustoria. An extrahaustorial matrix was found around the haustoria in both compatible and incompatible interactions. No wall appositions were observed at the infection sites in the parenchyma cells. In the compatible interaction, infecting hyphae grew well in the intercellular spaces between xylem vessels in stem tissues. Degraded host cell wall, plasmolysis of plasma membrane, and degenerated chloroplasts were pathological features of pumpkin stem tissues in both compatible and incompatible interactions. A characteristic host response in the resistant pumkin cultivar Danmatmaetdol was rapid cytoplasmic movement of host cells toward the oomycete haustoria.

• 한국정밀공학회지
• /
• 제14권1호
• /
• pp.142-149
• /
• 1997

Ceramic-coated anilox roll for printing is resistant to corrosion and wear, and hence has enhanced life and quality. Laser engraving is used typically for machining holes to store ink in this roll. Since engraved hole size and shape are directly related to laser processing parameters, it is necessary to know the rela- tionships among these parameters. In this study, the parameters for engraving of ;oasma sprayed ceramic coatings with Nd:YAG laser were studied. Relationships between hole shape and processing parameters were analyzed. Cr$_{2}$O$_{3}$ceramic was found to be most suitable for Nd:YAG laser engraving. It was found that hole depth can be increased by using higher energy pulses. Effect of using different assistant gases was small to the final results. For better results, it was suggested to use a very stable laser with shorter pulses and higher pulse energy.

• Genomics & Informatics
• /
• 제15권3호
• /
• pp.87-97
• /
• 2017

Multiple myeloma (MM) is a malignant disease caused by an abnormal proliferation of plasma cells, of which the prognostic factors include chromosomal abnormality, ${\beta}$-2 microglobulin, and albumin. Recently, the term chromothripsis has emerged, which is the massive but highly localized chromosomal rearrangement in response to a one-step catastrophic event. Many studies have shown an association of chromothripsis with the prognosis in several cancers; however, few studies have investigated it in MM. Here, we studied the association between chromothripsis-like patterns and treatment resistance or prognosis. First, we analyzed nine MM cell lines (U266, MM.1S, RPMI8226, KMS-11, KMS-12-BM, KMS-12-PE, KMS-28-BM, KMS-28-PE, and NCI-H929) and bone marrow samples of four patients who were diagnosed with MM by next-generation sequencing-based copy number variation analysis. The frequency of the chromothripsis-like pattern was observed in seven cell lines. We analyzed the treatment-induced chromothripsis-like patterns in KMS-12-BM and KMS-12-PE cells. As a result, breakpoints and chromothripsis-like patterns were increased after drug treatment in the relatively resistant KMS-12-BM. We further analyzed the patients' results according to the therapeutic response, which was divided into sensitive and resistant, as suggested by the International Myeloma Working Group. The chromothripsis-like pattern was more frequently observed in the resistant group. In the sensitive group, the frequency of the chromothripsis-like pattern decreased after treatment, whereas the resistant group showed increased chromothripsis-like patterns after the treatment. These results suggest that the chromothripsis-like pattern is associated with treatment response in MM.

• Clinical and Experimental Pediatrics
• /
• 제52권3호
• /
• pp.370-375
• /
• 2009

목 적 : 터너증후군 환자에서 대사증후군과 심혈관 질환의 위험성이 높다. 성인 연령의 터너증후군 환자들에서 대사증후군 관련요인을 분석하고, 인슐린 저항성의 대사위험성을 알아보기 위한 연구를 시행하였다. 방 법 : 43명의 성인 터너증후군 환자에서 대사증후군의 빈도와 관련 요인 값들을 분석하였다. HOMA-IR을 이용하여 인슐린 저항성군과 비저항성군으로 분류한 후 각 집단을 분석하고, HOMA- IR과 대사 증후군 관련요인의 상관관계를 알아보았다. 결 과 : 대사증후군은 터너증후군 환자의 7%에서 보였고 각 항목에 대해서 인슐린 저항성은 16.3%, 복부 비만이 15.4%, 고중성지방이 2.3%, 저HDL 콜레스테롤이 9.3%였고, 고혈압이 36.8 %였다. 체질량지수, 허리둘레, 공복 혈당, HOMA-IR, 수축기 혈압은 인슐린 저항성군에서 의미 있게 높게 나왔으며, HOMA-IR은 체질량지수, 허리둘레, 공복 혈당, 수축기 혈압과 양의 상관관계를 보였다(P<0.05). 결 론 : 터너증후군 성인 환자들에서 대사증후군의 위험성이 있으며, 인슐린 저항성과 대사증후군 관련요인 간에 상관관계를 보인다. 터너증후군 환자들에게서 대사관련 요인을 일정기간 마다 검사하여 대사증후군 또는 인슐린 저항성으로의 진행여부를 감시하고 심혈관 합병증을 예방하는 것이 필요하다.