• Journal of IKEEE
• /
• v.23 no.2
• /
• pp.350-357
• /
• 2019

We analyzed the system efficiency of small solar power plants with 80% of total solar power plants. The data of the solar power plant with installed capacity of 100kW was collected and the correlation of the ESS efficiency according to the capacity of the PCS and the battery of each power plant was deduced. As a result, the higher the C-rate value affecting the discharge rate of the battery, The discharge efficiency of the plasma display panel is increased.

• Journal of the Korean institute of surface engineering
• /
• v.32 no.6
• /
• pp.665-670
• /
• 1999

PDP용 적색형광체는 penning가스(Ne 및 5% Xe혼합가스)에 의해 방출되는 147nm파장에서 쉽게 여기되어 논은 양자효율을 주는 물질로 이루어지는데 본 실험은 발광효율을 높이기 위하여 $Y_2$$O_3$:Eu, $(Y,Gd)_2$$O_3$:Eu 및 $(Y,Cd)BO_3$:Eu를 공침법으로 합성하여 부활제인 $Bu^{3+}$ /의 농도, Flux첨가에 따른 미시조직의 변화등을 여기 방출 스펙트럼을 통해 발광효율을 조사하여 다음과 같은 결론을 얻었다. $Y_2$$O_3$:Eu 형광체 합성시 최적조정은 $Y_2$$O_3$에 대한 $Eu_2$$O_3$의 몰비는 5:1, $BaCO_3$ 첨가시 몰비는 15:1로 나타났으며 2차 소성시 $1200^{\circ}C$이상에서 1~3$\mu\textrm{m}$의 구형입상이 형성되었으며 입자의 크기, 형상은 발광특성에 영향을 미쳤다. 또 $Eu^{ 3+}$ 농도는 7wt%가 최적조건으로 나타났다.

• Journal of Ceramic Processing Research
• /
• v.13 no.spc2
• /
• pp.241-245
• /
• 2012

The barrier rib on plasma display panel (PDP) is a typical 3D-patterned thick film with thickness of 120 ㎛ and it is hard to measure its dielectric constant in this state of the product. Because the porosity of ceramic thick film influenced the mechanical and dielectric characteristics, it was expected that there was the relationship between two properties. Therefore, the correlation analysis between porosity, hardness and dielectric constant of the barrier rib was studied and the exponential curve between porosity and hardness, and the quadratic curve between porosity and dielectric constant were drawn. The dielectric constant was well related to hardness by K400kHz = 0.5672 + 5.695 ln(Hv). The hardness was measured at five points on two real panels which sintered by two types of profiles and then dielectric constants and deviation were estimated by the above equation.

• Transactions on Electrical and Electronic Materials
• /
• v.6 no.6
• /
• pp.276-279
• /
• 2005

Influences of sustain pulse-width on electrical characteristics and luminous efficiency are experimentally investigated for surface discharge of AC-PDP. A square pulse with variable duty ratio and fixed rising time of 300 ns has been used in the experiment. It is found that the memory coefficient is significantly increased at the critical pulse-width. And the wall charges and wall voltages as well as capacitances are experimentally measured by Q- V analysis method along with the voltage margin relation, in terms of the sustain pulse-width in the range of $1{\mu}s$ to $5{\mu}s$ under driving frequency of 10 kHz to 180 kHz. And the luminous efficiency is also experimentally investigated in above range of sustain pulse-width with driving frequency of 10 kHz to 180 kHz. It is noted that the luminous efficiency for 10 kHz and 180 kHz are 1.29 1m/W and 0.68 1m/W respectively, since the power consumption for 10 kHz is much less than that for 180 kHz. It has been concluded that the optimal sustain pulse-width is in the range of $2.5 {\~}4.5{\mu}s$ under driving frequency range of 10 kHz and 60 kHz, and in the range of $1.5 {\~} 2.5{\mu}s$ under driving frequency range of 120 kHz and 180 kHz based on observation of memory coefficient, and wall voltage as well as luminous efficiency.

• Journal of the Korean Vacuum Society
• /
• v.15 no.3
• /
• pp.259-265
• /
• 2006

We measured sputtering yield of RF $O_2-plasma$ treated MgO protective layer for AC-PDP(plasma display panel) using a Focused ion Beam System(FIB). A 10 kV acceleration voltage was applied. The sputtering yield of the untreated sample and the treated sample were 0.33 atoms/ion and 0.20 atoms/ion, respectively. The influence of the plasma-treatment of MgO thin film was characterized by XPS and AFM analysis. We observed that the binding energy of the O 1s spectra, the FWHM of O 1s spectra and the RMS(root-mean-square) of surface roughness decreased to 2.36 eV, 0.6167 eV and 0.32 nm, respectively.

• Korean Chemical Engineering Research
• /
• v.40 no.6
• /
• pp.752-756
• /
• 2002

Green-emitting $Zn_2SiO_4:Mn$ phosphors for PDP(Plasma Display Panel) application were synthesized by colloidal seed-assisted spray pyrolysis process. The codoping with $Gd^{3+}/Li^+$, which replaces $Si^{4+}$ site in the willemite structure, was performed to improve the luminous properties of the $Zn_2SiO_4:Mn$ phosphors. The particles prepared by spray pyrolysis process using fumed silica colloidal solution had a spherical shape, small particle size, narrow size distribution, and non-aggregation characteristics. The $Gd^{3+}/Li^+$ codoping amount affected the luminous characteristics of $Zn_2SiO_4:Mn$ phosphors. The codoping with proper amounts of $Gd^{3+}/Li^+$ improved both the photoluminescence efficiency and decay time of $Zn_2SiO_4:Mn$ phosphor particles. In spray pyrolysis, the post-treatment temperature is another factor controlling the luminous performance of $Zn_2SiO_4:Mn$ phosphors. The $Zn_{1.9}SiO_4:Mn_{0.1}$ phosphor particles containing 0.1 mol% $Gd^{3+}/Li^+$ co-dopant had a 5% higher PL intensity than the commercial product and 5.7 ms decay time after post-treatment at $1,145^{\circ}C$.

• Korean Journal of Materials Research
• /
• v.11 no.3
• /
• pp.227-235
• /
• 2001

In this work, Zn$_2$SiO$_4$:Mn phosphors were prepared by solid state reaction. The effect of sintering/reduction temperature, flow rate of H$_2$-5%/$N_2$-95% mix gas, and ball milling conditions have been investigated on the sake of PDP(Plasma Display Panel) application. The characteristics such as particle morphology and photoluminescence of prepared phosphors were compared to those of commercial Zn$_2$SiO$_4$:Mn Phosphors. It was found that the Phosphor synthesized at 130$0^{\circ}C$ with 0.08 Mn concentration had a maximum brightness, This brightness was increased more 20% by reduction treatment under 100me/min flow rate of 5%H$_2$-95%$N_2$ mixed gas. The size of particles decreased under 3$\mu\textrm{m}$ after ball milling. Especially, higher luminescence was obtained in our Zn$_2$SiO$_4$:Mn phosphors than commercial Zn$_2$SiO$_4$:Mn phosphors, so that they are able to be applied for PDP.

• Korean Chemical Engineering Research
• /
• v.47 no.2
• /
• pp.150-156
• /
• 2009

Plasma Display Panels(PDPs) require to have improved luminous efficiency, low manufacturing cost, and high image quality to compete with other flat display devices such as Liquid Crystal Displays(LCDs) and organic light-emitting diodes(OLEDs). In addition, the diversity of product line-up may be needed for high market share. In this paper, the optical characteristics of typical green phosphor for PDP application are reviewed and the problem-based solution will be proposed. We also shortly describe the principle of 3D-PDPs which are promising. Then, the requirement of green phosphor for 3D-PDP application is summarized and research achievement, as of now, is described. The typical problems of $Zn_2SiO_4:Mn$ phosphor, which is the most well-known, are the negatively charged surface property and the long decay time, which leads to unstable discharge in green cell and afterimage. These problems were solved by coating the phosphor surface with metallic oxide. It was found that $Al_2O_3$ would be the best material for $Zn_2SiO_4:Mn$ phosphor. It gives longevity as well as low operating voltage due to the charging effect in green cells. Also, new phosphors, $(Y,\;Gd)Al_3(BO_3)_4:Tb$ and $(Mg,\;Zn)Al_2O_4:Mn$ phosphor are proposed for increasing the luminance and reducing the decay time, which are capable to apply for 3D-PDP application.

• Resources Recycling
• /
• v.21 no.3
• /
• pp.65-73
• /
• 2012

There are several kinds of displays such as liquid crystal display (LCD), cathode ray tube (CRT), plasma display panel(PDP), light emitting diode (LED), organic light emitting diode (OLED), etc. Nowadays, recycling technologies of waste displays have been widely studied from economy and efficiency points of view. In this paper, patents and literature on the recycling technologies of the waste displays have been comprehensively analyzed. The search was limited to the open patents of USA (US), European Union (EU), Japan (JP), and Korea (KR) and SCI journals published from 1980 to 2011. Patents and journals were systematically compiled and collected using key-words search and filtered by pre-set filtering criteria. The trends of the patents and journals were thus analyzed according to the years, countries, companies, and technologies.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.13 no.1
• /
• pp.70-77
• /
• 2008

Conventional PDP power system, which commonly uses two isolation transformer, consists of sustaining power ($V_S$), addressing power($V_A$), and Multi power($V_M$). Because each of these power conversion circuits use transformer and control IC, there are several defects: decrease of efficiency, rise of cost, and parts stress. This paper is proposed the method which operates PDP power system only with one transformer. The proposed method contributes not only to high-efficient performance of the DC/DC power stage and improvement of reliability but also to reduction of cost by reducing volume and size. Also, proposed method is proper to Address Display-period Separation(ADS) which is one of the driving methods of PDP. Superiority of the proposed method is proved by comparison with conventional method and theoretical, experimental analysis.