• Journal of Information Display
• /
• v.3 no.2
• /
• pp.26-30
• /
• 2002

Large area plasma source has been built for LCD etcher by an array of $2{\times}2$ ICP sources. Since only one RF power supply and one impedance matching network is used in this configuration, any difference in impedances of unit RF antennas causes unbalanced power delivery to the unit ICP. In order to solve this unavoidable unbalance, unit antenna is designed to have a movable tap, with which the inductance of each unit can be adjusted individually. The plasma density becomes symmetric and etch rate becomes more uniform with the impedance adjustment. The concept of adding axial time-varying magnetic field to the single ICP source is applied to the array ICP source, and is found to be effective in terms of etch rate and uniformity.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2008.11a
• /
• pp.90-90
• /
• 2008

실리콘을 기판으로 하는 대부분의 태양전지에서는 표면반사에 의한 광에너지손실을 최소화시키고자 습식에칭(wet etching)에 의한 텍스쳐링처리가 이루어진다. 그러나 습식 에칭은 공정 과정이 번거롭고 비용이 많이 든다. Inductively Coupled Plasma Etcher 장비를 이용한 플라즈마 에칭 (plasma etching)을 실리콘 표면에 적용하여 공정을 간단하고 저렴하게 하며 반사도를 획기적으로 낮추는 기술이 개발되었다. 습식 에칭으로 형성된 표면의 피라미드 구조는 1차 반사 후 빛의 일부가 외부로 흩어져 나가지만 플라즈마 에칭으로 형성된 나노구조는 내부전반사가 가능하여 대부분의 태양 에너지를 흡수한다. 나노구조는 필라(pillar)의 형태로 형성되며 이 필라의 길이에 따라 반사도가 다르게 나타난다. 이는 플라즈마 에칭 시 발생하는 이온폭격과 에칭 측벽 식각 보호막(SiOxFy : Silicon- Oxy- Fluoride)이 필라의 길이에 영향을 주기 때문이며, 필라가 길수록 반사도를 저하시킨다. 최저의 반사도를 얻기 위해서 나노필라 형성에 기여하는 플라즈마 에칭 시간, RF bias power, SF6/O2 gas ratio의 변화에 따른 실험이 진행되었다. 플라즈마 발생 초기에는 표면의 거칠기만 증가할 뿐 필라가 형성되지 않지만 특정조건에서 3um 이상의 필라를 얻는다. 이는 에칭 측벽 식각 억제막이 약한 부분으로 이온폭격이 집중되어 발생한다. 플라즈마 에칭을 적용하여 형성된 나노필라는 반사도가 가시광 영역에서 대략 1%에 불과하며, 마스크 없이 공정이 가능한 장점이 있다.

• Journal of the Korean Vacuum Society
• /
• v.6 no.3
• /
• pp.287-292
• /
• 1997

This study was tried to form the silica waveguide using high density plasma. Plasma characteristics have been investigated as a function of etch parameters using a single Langmuir probe and optical emission spectroscopy(OES). As etch parameters, $CF_4/CHF_3$ ratio, bias power, and source power were chosen as main variables. The oxide etch characteristics of inductively coupled plasma(ICP) dry etcher such as the etch rate, etch profile, and surface roughness were investigated s a function of etch parameters. On the basis of these results, the core pattern of the wave guide composed of $SiO_2-P_2O_5$ was formed. It was confirmed that the etch rate of $SiO_2-P_2O_5$ core layer was 380 nm/min and the aluminum selectivity to oxide, that is, mask layer was approximately 30:1. The SEM images showed vertical etched profiles and minimal loss of pattern width.

• Journal of the Korean Vacuum Society
• /
• v.7 no.2
• /
• pp.155-160
• /
• 1998

It is necessary to use Arc layer and DUV resist to define 0.25 $\mu \textrm{m}$ line and space for 256 MDRAM devices. Poly-Si etching with Arc layer and different resists has been performed in a TCP-9408 etcher with variation of gas chemistries; $Cl_2/O_2, Cl_2/N_2, Cl_2$/HBr . DUV resist causes more positive etch profile and CD gain compared to I-line resist because the sidewall passivation is more stimulated by increasing polymerization through the loss of resist. When Arc layer is applied, CD hain also increases due to the polymeric mask formed after thching Arc layer. From the point of gas chemistry effects, the etch profile and CD gain is not improved using $Cl_2/O_2$ gas, since polymerization is accelerated in this gas. however, the vertical profile and less CD gain is obtained using $Cl_2$/HBr gas. Furthermore, HBr gas is very effective to suppress the difference of profile and CD variation between dense pattern and isolated pattern by minimizing non-uniformity of side wall passivation with pattern density.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2010.08a
• /
• pp.291-291
• /
• 2010

Electron-beam lithography (EBL) process is a versatile tool for a fabrication of nanostructures, nano-gap electrodes or molecular arrays and its application to nano-device. However, it is not appropriate for the fabrication of sub-5 nm features and high-aspect-ratio nanostructures due to the limitation of EBL resolution. In this study, the precision assembly and alignment of DNA molecule was demonstrated using sub-5 nm nanostructures formed by a combination of conventional electron-beam lithography (EBL) and plasma ashing processes. The ma-N2401 (EBL-negative tone resist) nanostructures were patterned by EBL process at a dose of $200\;{\mu}C/cm2$ with 25 kV and then were ashed by a chemical dry etcher at microwave (${\mu}W$) power of 50 W. We confirmed that this method was useful for sub-5 nm patterning of high-aspect-ratio nanostructures. In addition, we also utilized the surface-patterning technique to create the molecular pattern comprised 3-(aminopropyl) triethoxysilane (APS) as adhesion layer and octadecyltrichlorosilane (OTS) as passivation layer. DNA-templated gold nanoparticle chain was attached only on the sub-5 nm APS region defined by the amine groups, but not on surface of the OTS region. We were able to obtain DNA molecules aligned selectively on a SiO2/Si substrate using atomic force microscopy (AFM).

• Journal of Surface Science and Engineering
• /
• v.36 no.5
• /
• pp.418-422
• /
• 2003

평판형 유도결합 플라즈마 식각장비(inductively coupled plasma etcher)를 이용하여 각종 공정조건들에 따른 GaAs의 식각특성을 연구하였다. 공정변수들은 ICP 소스파워(0-500 W), RIE 척파워(0-150 W), 가스 종류($BCl_3$, $BCl_3$/Ar, $BCl_3$/Ne) 및 가스혼합비였다. $BCl_3$ 가스만을 이용하여 GaAs를 식각한 경우보다 25%의 Ar이나 Ne같은 불활성 기체를 혼합한 $15BCl_3$/5Ar, $15BCl_3$/5Ne 가스를 이용한 경우의 식각률이 더 우수한 것을 확인하였다. 그리고 50% 이하의 Ar이 혼합된 $BCl_3$/Ar의 경우는 높은 식각률 (＞4,000 $\AA$/min)과 평탄한 표면(RMS roughness : ＜2 nm)을 얻을 수 있었지만 지나친 양(＞50%)의 Ar의 혼합은 오히려 표면을 거칠게 하거나 식각률을 떨어뜨리는 결과를 가져왔다. 그리고 20 sccm $BCl_3$, 100 W RIE 척파워, 300 W ICP 소스파워, 공정압력이 7.5 mTorr인 조건에서의 GaAs의 식각결과는 아주 우수한 특성(식각률: ∼ 4,000, $\AA$/min, 우수한 수직측벽도: ＞$87^{\circ}$, 평탄한 표면: RMS roughness : ∼0.6 nm)을 나타내었다.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2015.08a
• /
• pp.129-129
• /
• 2015

Dry etcher, PECVD등의 플라즈마 공정 장비의 구조물에는 유전체로 절연된 금속판들이 사용된다. 플라즈마 이론을 보면 이들 표면의 전위는 양전하 플럭스와 음전하 플럭스가 같아서 순전류가 0이 되는 부유 전위를 갖는다. 금속과 같은 전도체의 표면은 모두 같은 전위를 가져야 한다. 일반적인 플라즈마 시뮬레이션 소프트웨어에는 이런 경계 조건이 선택 가능하지 않다. ESI사의 CFD-ACE+의 사용자 루틴 개발 기능을 이용하여 Fortran90문법으로 경계면 최인접 셀의 중심에서 구한 전자 온도와 경계면의 이온 입사 플럭스로 가중평균을 구한 이온 질량을 맥스웰분포를 가정한 부유 전위식에 대입하여 시뮬레이션을 CCP에서 구현하였다. 원형 챔버의 가장자리에 떠 있는 사각 링 전극을 가정하고 이 전극 표면이 접지 전위일때, 유전체 일때, 본 연구에서 개발한 루틴을 적용한 결과를 Ar CCP에 대해서 비교 분석하였다.

• Journal of the Microelectronics and Packaging Society
• /
• v.7 no.4
• /
• pp.43-47
• /
• 2000

The etching characteristic of a tantalum thin film with pure chlorine plasma was studied using an electron cyclotron resonance etcher system. Optical emission actinometry (OEA) was used for the study of the etching mechanism of a tantalum thin film and optimum process condition was achieved by OEA study. Based on this mechanism, double step etching was performed and 0.15 $\mu\textrm{m}$ L & S was acquired successfully suppressing the microloading effect.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.17 no.1
• /
• pp.1-6
• /
• 2004

Dry etch characteristics of polysilicon with HBr/O$_2$ inductively coupled plasma (ICP) have been investigated. We determined etch late, uniformity, etch profiles, and selectivity with analyzing the cross-sectional scanning electron microscopy images obtained from top, center, bottom, right, and left positions. The etch rate of polysilicon was about 2500 $\AA$/min, which meets with the mass production for devices. The wafer level etch uniformity was within $\pm$5 ％. Etch profile showed 90$^{\circ}$ slopes without notches. The selectivity over photoresist was between 2:1∼4.5:1, depending on $O_2$ flow rate. The HBr-ICP etching showed higher PR selectivity, and sharper profile than the conventional Cl$_2$-RIE.

• Proceedings of the International Microelectronics And Packaging Society Conference
• /
• 2002.05a
• /
• pp.255-258
• /
• 2002

In this study, $CeO_2$thin films were etched with an addition of $Cl_2$gas to $Ar/CF_4$gas mixing in an inductively coupled plasma(ICP) etcher. The surface reactions of the etched $_CeO2$thin films were investigated by X-ray photoelectron spectroscopy(XPS). It was analyzed that Ce peaks were mainly observed in Ce-O bonds formed $CeO_2$or $CeO_3$compounds. Cl peaks were detected by the peaks of Cl $2p_{3/2}$ and Cl $2p_{1/2}$. Almost all of Cl atoms were combined with Ce atoms like $CeCl_{x}$ compounds.