• 제목/요약/키워드: Plasma emission

검색결과 1,180건 처리시간 0.023초

우리 국민의 나트륨 및 칼륨 섭취량 평가: 식품별 영양성분 함량 DB와 한국형 총 식이조사 기반 추정량 비교 연구 (Dietary sodium and potassium intake of Koreans estimated using 2 different sources of their contents in foods, Food & Nutrient Database and the Korean Total Diet Study : a comparative study)

  • 이지연;권성옥;이수현;서민정;이계호;김초일
    • 대한지역사회영양학회지
    • /
    • 제28권3호
    • /
    • pp.235-244
    • /
    • 2023
  • Objectives: Based on the results from the Korean Total Diet Study (KTDS), the sodium (Na) and potassium (K) intake of Koreans were estimated and compared with intake estimates from the Food & Nutrient Database (FNDB), as in the Korea National Health and Nutrition Examination Survey (KNHANES) to verify the validity of these estimates. Methods: One hundred and thirty-four representative foods (RFs) covering 92.5% of the total food intake of Koreans were selected, and 228 pairs of corresponding 'RF x representative cooking method' were derived by reflecting the methods used mainly in terms of frequency and quantity in their cooking. RF samples were collected from three cities with a larger population size in three regions (nine cities) nationwide, and six composite samples were made for each RF, considering its regional and/or seasonal characteristics. One thousand three hundred and sixty-eight 'RF x representative cooking method' pair samples were prepared, and the Na and K contents were assessed using inductively coupled plasma atomic emission spectrometry (ICP-MS). The Na and K intake of the Korean population was estimated by linking the content with the food intake data from the 7th KNHANES. Results: The mean Na and K intake of Koreans were 2,807.4 mg and 2,335.0 mg per person per day, respectively. A comparison with the Na and K intake from KNHANES, including only RFs of KTDS, showed comparable results with less than 5% variation. While the contribution and ranking of food items to Na intake were similar between KNHANES and KTDS, there were differences in K intake. This was attributed to the large discrepancies in the K content of rice and coffee between KTDS results and the values in the 9th Revision of the National Food Composition Table used in KNHANES. Conclusions: The Na and K intake of Koreans estimated based on the KTDS, which performed nutrient analysis on samples prepared to a 'table-ready' state using foods of the representative collection, was similar and comparable with that of KNHANES. This supports the validity and usefulness of FNDB-based nutrient intake estimation at the population level. The list of nutrients studied in KTDS is expected to be expanded, allowing for intake estimation of nutrients with currently insufficient or absent information in the FNDBs in use.

AG® 50W-X8 양이온교환수지를 이용한 희토류원소의 분리와 분석에 관한 연구 (A study on the separation and determination of the rare earth Elements by the AG® 50W-X8 cation exchange resin)

  • 이정숙;최범석
    • 분석과학
    • /
    • 제21권4호
    • /
    • pp.272-278
    • /
    • 2008
  • $AG^{(R)}$ 50W-X8 양이온교환수지를 이용하여 14종의 희토류원소와 Y를분리하고, 유도결합플라스마 원자방출분광법(ICP-AES)으로 분석하는 방법에 대해 연구하였다. 수지에 대한 희토류원소의 이온교환용량은 매우 커 pH 1~6 범위와 0.3~1.0mL/min의 흐름속도에서 희토류원소는 모두 정량적으로 이온교환 되었다. 희토류원소의 돌파점 용량 곡선은 경희토류원소(Cerium 그릅)의 이온교환능력이 중희토류원소(Yttrium 그릅) 보다 큰 것을 보여주었다. 100mg의 이온교환수지에 각각 $200{\mu}g$의 희토류원소들이 이온교환 되어있을 때 대부분의 중희토류원소는 2.0M의 질산 10 mL로, 경희토류원소는 30mL로 정량적으로 탈착시킬 수 있었다. 본 방법으로 모나자이트 중에 희토류원소를 분석하였다. 모나자이트 중에 공존하는 Ti, Mn, Mg, Ca 등의 원소는 상대적으로 희토류원소 보다 이온교환 능력이 낮아, 매트릭스 원소로 부터 희토류원소의 분리가 가능하였다. 그러나 본 방법에서 분석 결과의 상대표준편차는 1~5%로 향상되지 않았다.

ICP-AES와 SDE, HS-SPME-GC/MS를 이용한 참나물의 무기성분과 향기성분 (Analysis of Mineral and Volatile Flavor Compounds in Pimpinella brachycarpa N. by ICP-AES and SDE, HS-SPME-GC/MS)

  • 장경미;정미숙;김미경;김건희
    • 한국식생활문화학회지
    • /
    • 제22권2호
    • /
    • pp.246-253
    • /
    • 2007
  • 참나물의 잎과 줄기부위에서 가장 많이 함유하고 있는 무기 성분은 K, P, Ca, Mg 순이었으며 잎 부위가 줄기부위보다 Ca, P, Mg함유량이 약 4배 정도 많았다 전자코를 이용한 휘발성 향기성분 패턴은 신선한 참나물의 경우 제1주성분 값이 +값을, 음건한 건조 참나물은 - 값을 나타내어서 신선한 참나물과 건조한 참나물 사이에는 뚜렷한 차이를 보였고 건조방법에 따른 시료간의 구별이 가능하였다. SDE법에 의해 신선한 참나물은 aldehydes 3종, alcohols 9종, ester 4종, hydrocarbons 5종, terpen hydrocarbons 34종, ketone 1종, 기타 2종의 총 58 종이 확인되었고, 음건한 참나물은 aldehydes 4종, alcohols 7종, hydrocarbon 1종, terpen hydrocarbons 17종, ketone 1종, 기타 1종의 총 31종이 확인되었다. SDE법에 의한 신선, 음건한 참나물 모두 ${\alpha}$-selinene(37.89%, 12.59%)가 가장 많이 확인되었는데 신선할 때보다 음건한 경우 휘발성향기성분의 peak수와 peak area%가 적었다. CAR/PDMS fiber HS-SPME법에 의해 34종이 확인되었는데 aldehydes 2종, alcohols 2종, hydrocarbons 7종, terpen hydrocarbons 23종이며 myrcene(15.50%)가 가장 많이 확인되었다. PDMS fiber HS-SPME법에 의해 aldehydes 1종, alcohols 1종, hydrocarbons 2종, terpen hydrocarbons 17종으로 총 21종이 확인되었고 germacrene D(16.84%)가 가장 많았다. SDE법에 의한 경우가 SPME법보다 향기성분의 종류와 양이 많았고 HS-SPME법의 경우 CAR/PDMS fiber가 PDMS fiber 보다 더 많은 종류의 향기가 확인되었다.

폐암으로 오인된 면역글로불린 G4 연관 폐 질환: 2예에 대한 증례 보고 (Immunoglobulin G4-Related Lung Disease Mimicking Lung Cancer: Two Case Reports)

  • 박대윤;김수영;배석현;이지영
    • 대한영상의학회지
    • /
    • 제83권5호
    • /
    • pp.1168-1174
    • /
    • 2022
  • 면역글로불린 G4 (Immunoglobulin G4; 이하 IgG4) 연관 질환은 혈청 IgG4의 상승과 조직으로의 IgG4 양성 형질세포의 침윤을 특징으로 하는 드문 섬유 염증성 질환이다. 흉부 전산화단층촬영에서 IgG4 연관 폐 질환은 다양한 영상의학적 소견을 보여 다른 질환과의 감별이 어렵고 특히 고형 결절 혹은 종괴의 형태로 나타나는 경우 폐암과의 감별이 필요하다. IgG4 연관 폐 질환에서 나타날 수 있는 다른 영상의학적 소견 또한 폐암과 연관되어 나타나는 전이나 림프관성 암종증처럼 보일 수 있다. 저자들은 수술을 통하여 병리학적으로 확진된 IgG4 연관 폐 질환 2예를 경험하였다. 두 증례는 CT에서 고형결절 혹은 종괴의 형태로 나타났으며 폐암과 연관되어 보일 수 있는 다른 영상의학적 소견을 동반하고 있어 폐암과의 감별이 매우 어려웠다. 혈청 IgG4 수치나 다른 장기의 침범 여부가 감별에 도움을 줄 수 있으나 정확한 확진을 위해서 조직검사가 필요하다.

Comparative Analysis of the Physical and Biochemical Properties of Light-cure Resin-modified Pulp Capping Materials

  • Tae Gyeom Kim;Jongsoo Kim;Joonhaeng Lee;Jisun Shin;Mi Ran Han;Jongbin Kim;Yujin Kim;Jae Hee Park
    • 대한소아치과학회지
    • /
    • 제51권2호
    • /
    • pp.149-164
    • /
    • 2024
  • This study compared the solubility, water absorption, dimensional stability, release of various ions (hydroxyl, calcium, sulfur, strontium, and silicon), and cytotoxicity of light-cured resin-modified pulp-capping materials. Resin-modified calcium hydroxide (Ultra-blendTM plus, UBP), light-cured resin-modified calcium silicate (TheraCal LCTM, TLC), and dual-cure resin-modified calcium silicate (TheraCal PTTM, TPT) were used. Each material was polymerized; solubility, 24-hour water absorption, and 30- day dimensional stability experiments were conducted to test its physical properties. Solubility was assessed according to the ISO 6876 standard, and 24 hours of water absorption, 30 days of dimensional stability were assessed by referring to the previous protocol respectively. Eluates at 3 and 24 hours and on 7, 14, and 28 days were analyzed according to the ISO 10993-12 standard. And the pH, Ion-releasing ability, cell proliferation rate, and cell viability were assessed using the eluates to evaluate biochemical characteristics. pH was measured with a pH meter and Ion-releasing ability was assessed using inductively coupled plasma atomic emission spectrometry (ICP-AES). Cell proliferation rate and cell viability were assessed using human dental pulp cells (hDPCs). The former was assessed by an absorbance assay using the CCK-8 solution, and the latter was assessed by Live and Dead staining. TPT exhibited lower solubility and water absorption than TLC. UBP and TPT demonstrated higher stability than TLC. The release of sulfur, strontium, calcium, and hydroxyl ions was higher for TLC and TPT than for UBP. The 28-day release of hydroxyl and silicon ions was similar for TLC and TPT. TLC alone exhibited a lower cell proliferation rate compared to the control group at a dilution ratio of 1 : 2 in cell proliferation and dead cells from Live and Dead assay evaluation. Thus, when using light-cure resin-modified pulp-capping materials, calcium silicate-based materials can be considered alternatives to calcium hydroxide-based materials. Moreover, when comparing physical and biochemical properties, TPT could be prioritized over TLC as the first choice.

분자핵의학 기법을 이용한 다약제내성 진단 (Detection of Multidrug Resistance Using Molecular Nuclear Technique)

  • 이재태;안병철
    • 대한핵의학회지
    • /
    • 제38권2호
    • /
    • pp.180-189
    • /
    • 2004
  • 다약제내성이 발현된 암세포에서 세포내의 항암제를 세포외로 배출시키는 기전을 체내에서 비침습적인 방법으로 영상화 할 수 있는 SPECT와 PET는 악성종양의 진단과 평가에 중요한 역할을 할 것으로 판단되나, 아직까지도 Pgp와 MRP의 운반능을 적절하게 평가하는 핵의학적 영상방법을 정립하는데는 극복해야할 문제점들이 많다. 지금까지의 MDR영상에 관한 연구들은 대부분이 $^{99m}Tc$-표지 방사성의약품을 이용한 연구였으나, PET의 임상 응용이 증가함에 따라 보다 특이적이고 쉽게 응용될 수 있는 PET용 방사성 추적자의 개발도 이루어져야 할 것이다. $^{99m}Tc$-MIBI의 암 세포내 일방향(unidirectional) 섭취는 음성인 세포막 전하와 세포내 소립체 기질 전하에 의하여 결정되므로, MIBI의 섭취는 다른 지용성 양전하를 띤 막전위 추적자들과 유사하게 작용한다. $^{99m}Tc$-표지 방사성의약품은 암조직의 혈류 증가나 소립체 용적이나 활성도가 증가하면 섭취가 증가할 수 있어 보다 특이적인 MDR추적제의 개발이 필요한 것이다. 최근 Lorke 등은 약제감수성 및 내성 인체대장암세포인 $HT-29^{par}$ 세포와 $HT-29^{mdrl}$ 세포를 이용한 연구에서, 두세포 모두에서 $^{18}F$-FDG의 섭취가 있었고, MDR이 발현된 세포와 종양에서 $^{18}F$-FDG 섭취가 훨씬 낮았고, MIBI는 MDR이 없는 모세포에서도 매우 낮았음을 보고한 바 있다. 이 세포는 전자현미경검사에서 사립체가 풍부하지 않은 세포였다. 그러므로 이러한 결과로 보아 $^{99m}Tc$-MIBI 영상에서 종양이 보이지 않거나 섭취가 미약하다고 해도 MDR이 발현되었다고 단정할 수는 없게 된다. 즉 MDR의 발현유무를 정확하게 감별할 수 있기 위하여는 저항이 없는 세포에 MIBI가 충분하게 섭취되어야 한다는 것이 필수적인 요건이며, 종양세포 종류에 따라서는 FDG가 MDR의 marker가 될 수 있다는 것이다. Pgp 수송체는 ATP의존성 약제배출 펌프이므로 MDR세포는 에너지가 많이 필요하여, MDR 세포는 당분해율(rate of glycolysis)이 증가되어 있고 HT-29 mdrl 종양세포에서는 포도당 이동과정의 변화로 FDG 섭취가 감소되었다. 또한 Pgp가 점차 증가됨과 함께 plasma membrane transporter인 GLUT-1 level이 감소된다. 이러한 결과는 다약제내성의 영상화가 지금까지의 예상보다 보다 복합적이고 다양하므로 보다 많은 연구가 필요할 것이라는 점을 시사한다. 최근 시도되고 있는 생체광학 영상을 이용한 다약제내성 유전자 및 Pgp 발현 연구는 아직 시작단계이나, 분자 생물학적 영상법의 발전과 함께 MRI 기술등에도 이용될 수 있으므로 향후 많은 연구가 있을 것으로 기대된다.

포항지역 대기 중 초미세먼지(PM$_{2.5}$)의 오염특성평가 (Characterization of Concentrations of Fine Particulate Matter in the Atmosphere of Pohang Area)

  • 백성옥;허윤경;박영화
    • 대한환경공학회지
    • /
    • 제30권3호
    • /
    • pp.302-313
    • /
    • 2008
  • 본 연구는 포항지역 대기 중 PM$_{2.5}$의 물리 화학적 성분들의 농도분포특성을 파악하여 PM$_{2.5}$에 대한 배출원 기여도를 정량적으로 추정하고 PM$_{2.5}$농도 변동에 영향을 미치는 배출원을 알아보고자 하였다. 시료채취지점은 포항지역 내의 대조적인 두 지점인 공업지역과 주거지역에서 각 1개 지점을 선정하였다. 시료채취는 2003년 3월부터 12월에 걸쳐서 계절별 10$\sim$15일 동안 고용량공기시료채취기를 이용하여 24시간 연속 채취였다. PM$_{2.5}$ 시료에 함유된 화학성분들은 산추출하여 ICP와 이온크로마토그래피로 분석하였다. PM$_{2.5}$의 전체평균은 공업지역이 36.6 $\mu$g/m$^3$, 주거지역에서 30.6 $\mu$g/m$^3$로 나타났다. 계절별로는 두 지점 모두 봄철에 가장 높은 농도를 보이고 있으며 다음으로 겨울철, 가을철, 여름철의 순으로 나타났다. 두 측정지점에서 PM$_{2.5}$ 중 가장 많이 함유된 화학성분들은 이차생성입자를 형성하는 성분인 NO$_3^-$, SO$_4^{2-}$으로 나타났으며 각각의 농도는 공업지역에서 4.2 및 8.6 $\mu$g/m$^3$, 주거지역에서 3.7 및 6.9 $\mu$g/m$^3$로 나타났다. 반면, 공업지역에서는 Fe, Mn, Cr 등의 금속성분 농도가 주거지역에 비해 상당히 높게 나타나 공업지역이 철강산업의 영향을 반영하고 있는 것으로 추측된다. 포항지역 대기 중 PM$_{2.5}$의 농도 변동에 미치는 주요 영향인자를 파악하기 위하여 주성분 분석 및 다중회귀분석을 실시한 결과, 공업지역과 주거지역에서 가장 중요한 변수는 도로 비산먼지와 이차생성입자인 것으로 나타났으며, 이들 변수의 변동이 전체 PM$_{2.5}$ 농도변동에 가장 큰 영향을 미친다는 것을 알 수 있었다. 또한 포항지역 PM$_{2.5}$에 대한 주요 발생원의 기여도를 평가하기 위하여 CMB 모델링을 수행한 결과 공업지역의 경우 기여도가 큰 발생원은 토사 및 도로상의 비산먼지로 나타났고 그 다음으로 이차생성입자, 자동차, 해염입자, 금속산업의 순을 보였으며 주거지역도 이와 유사한 양상을 보였다. 이와 같은 결과를 토대로 국내에서 측정된 먼지시료를 대상으로 CMB 모델링 수행 시 그 적용한계성과 문제점 등을 고찰하였다.

기판 bias 전압이 a-C:H 박막의 특성에 미치는 영향 (Effect of substrate bias voltage on a-C:H film)

  • 유영조;김효근;장홍규;오재석;김근식
    • 한국진공학회지
    • /
    • 제6권4호
    • /
    • pp.348-353
    • /
    • 1997
  • DC saddle-field plasma enhanced chemical vapor deposition(PECVD) 장치를 이용 하여 상온에서 p-type Si(100) 기판위에 hydrogenated amorphous carbon(a-C:H) 박막을 증 착하고 기판의 bias 전압 변화에 따른 박막의 미세구조 변화와 광학적 특성을 연구하였다. 본 실험시 CH4 가스의 유량은 5sccm, 진공조의 $CH_4$ 가스압력은 90mtorr로 일정하게 유지 하였으며 기판의 bias 전압($V_s$)은 0V에서 400V까지 변화시켰다. Rutherford backscattering spectroscopy(RBS)와 elastic recoil detection(ERD) 측정결과 증착된 a-C:H박막의 증착율은 $V_s$=0V에서 $V_s$=400V로 증가함에 따라 45$\AA$/min에서 5$\AA$/min으로 크게 감소하였지만 박막 내의 수소 함유량은 15%에서 52%까지 크게 증가하였다. a-C:H박막내의 수소 함유량이 증 가함에 따라 a-C:H박막은 sp3CH3구조의 polymer like carbon(PLC) 구조로 변환되는 것을 FT-IR로 확인하였으며 Raman 측정 결과 $V_s$=100V와 $V_s$=200V에서 증착한 a-C:H 박막에서 만 C-C결합에 의한 disorder 및 graphite peak를 볼 수 있었다. Photoluminescence(PL) 측 정 결과 $V_s$=200V까지는 기판의 bias 전압이 증가함에 따라 PL세기는 증가하였으나 그 이 상의 인가전압에서는 PL세기가 점점 감소하였다. 특히 $V_s$=200V에서 제작한 a-C:H박막의 PL특성은 상온에서도 눈으로 보일 만큼 우수한 발광 특성을 보였으며, 기판 bias전압이 증 가함에 따라 PL peak 위치가 청색으로 편이하는 경향을 보였다. 이러한 발광 세기의 변화 는 $V_s$=0V부터 $V_s$=200V까지는 기판의 bias전압이 증가함에 따라 상대적으로 박막의 표면에 충돌하는 이온에너지의 감소로 인해 a-C:H박막내에 비발광 중심으로 작용하는 dangling bond가 감소하여 발광의 세기가 증가하였으며 $V_s$=300V이상에서는 박막내의 수소 함유량이 증가함에 따라 dangling bond수는 감소하나 발광 중심으로 작용하는 탄소간의 $\pi$결합을 포 함하는 cluster가 줄어들어 PL세기가 감소한 것으로 생각된다.

  • PDF

일부 젊은 성인여자의 Fe, Zn, Cu, Mn, Se, Mo 및 Cr의 식사섭취, 혈청농도 및 소변배설 (Dietary Intakes, Serum Concentrations, and Urinary Excretions of Fe, Zn, Cu, Mn, Se, Mo, and Cr of Korean Young Adult Women)

  • 김경희;임현숙
    • Journal of Nutrition and Health
    • /
    • 제39권8호
    • /
    • pp.762-772
    • /
    • 2006
  • This study was conducted to investigate dietary intakes, serum concentrations, and urinary excretions of iron (Fe), zinc (Zn), copper (Cu), manganese (Mn), selenium (Se), molybdenum (Mo), and chromium (Cr) of Korean young adult women. A total of 19 apparently healthy young adult women aged in their twenties or thirties participated voluntarily. One-tenth of all foods they consumed for 3 consecutive days were collected, all urine excreted for the same 3 days was gathered, and fasting venous blood was withdrawn for the trace mineral analyses. Of the food, blood, and urine samples, the contents of Zn, Cu, Mn, Se, Mo, and Cr were analyzed by inductively coupled plasma-mass spectroscopy (ICP-MS) and that of Fe by inductively coupled plasma-atomic emission spectroscopy (ICP-AES) after wet digestion. The intake of Fe, $6.94{\pm}2.18mg$, did not meet the estimated average requirement (EAR) for Korean women aged 20-29 years old. On the contrary, the intakes of Zn ($9.35{\pm}4.95mg$), Cu ($1.18{\pm}0.26mg$), and Mn ($3.69{\pm}0.69mg$) were sufficient for each respective EAR. However, some of the subjects did not take the EAR for Zn. The Se intake, $41.93{\pm}9.28{\mu}g$, however, was almost similar to the EAR for Se. Although there are no references for Mo and Cr, the intakes of these minerals ($134.0{\pm}49.1\;and\;136.5{\pm}147.9{\mu}g$, respectively) seemed to be excessively sufficient. Serum Fe concentration, $88.7{\pm}36.8{\mu}g/dL$, seemed to be a little bit lower than its reference median but within its normal range. Approximately one-fourth of the subjects were in anemic determined by Hb and Hct and below the deficiency serum level of Fe, $60{\mu}g/dL$. In addition, serum Se concentration, $3.73{\pm}0.60{\mu}g/dL$, was also below its reference median and normal range. However, serum concentrations of Zn ($99.6{\pm}30.6{\mu}g/dL$) and Mo ($0.25{\pm}0.10{\mu}g/dL$) were fairly good compared to each reference median. The status of Cu could be determined as good although its serum concentration ($91.6{\pm}14.6{\mu}g/dL$) was slightly below its reference median. Since there are no decisive reference values, it was not easy to evaluate serum concentrations of Mn ($0.93{\pm}0.85{\mu}g/dL$) and Cr ($8.60{\pm}7.25{\mu}g/dL$). But Mn and Cr status seemed to be adequate. Urinary Fe excretion, $4.48{\pm}1.98{\mu}g/dL$, was pretty much lower than its reference and that of Se, $2.45{\pm}1.17{\mu}g/dL$, was also lower than its average. On the other hand, those of Zn ($42.95{\pm}20.47{\mu}g/dL$) and Cu ($5.68{\pm}1.50{\mu}g/dL$) were flirty good. In case of Mn, urinary excretion, $0.31{\pm}0.09{\mu}g/dL$, was much greater than its reference. Urinary excretions of Mo ($7.48{\pm}2.95{\mu}g/dL$) and Cr ($1.37{\pm}0.41{\mu}g/dL$) were very higher compared to each reference. The results of this study revealed that Korean young adult women were considerably poor in Fe status, a bit inadequate in Se status, partly inadequate in Zn status, and flirty good in Cu, Mn, Mo and Cr status. However, there was a problem of excessive intakes of Mo and Cr. It, therefore, should be concerned to increase the intakes of Fe, Se and Zn but to decrease Mo and Cr consumption for young adult women.

아말감의 구강내 부식 및 인공 부식에 관한 연구 (A STUDY ON IN VIVO AND IN VITRO AMALGAM CORROSION)

  • 임병목;권혁춘;엄정문
    • Restorative Dentistry and Endodontics
    • /
    • 제22권1호
    • /
    • pp.1-33
    • /
    • 1997
  • The objective of this study was to analyze the in vitro and in vivo corrosion products of low and high copper amalgams. The four different types of amalgam alloy used in this study were Fine cut, Caulk spherical, Dispersalloy, and Tytin. After each amalgam alloy and Hg were triturated according to the directions of the manufacturer by means of the mechanical amalgamator(Amalgam mixer. Shinhung Co. Korea), the triturated mass was inserted into a cylindrical metal mold which was 12mm in diameter and 10mm in height. The mass was condensed by 150Kg/cm compressive force. The specimen was removed from the mold and aged at room temperature for about seven days. The standard surface preparation was routinely carried out by emery paper polishing under running water. In vitro amalgam specimens were potentiostatically polarized ten times in a normal saline solution at $37^{\circ}C$(potentiostat : HA-301. Hukuto Denko Corp. Japan). Each specimen was subjected to anodic polarization scan within the potential range -1700mV to+400mV(SCE). After corrosion tests, anodic polarization curves and corrosion potentials were obtained. The amount of component elements dissolved from amalgams into solution was measured three times by ICP AES(Inductive Coupled Plasma Atomic Emission Spectrometry: Plasma 40. Perkim Elmer Co. U.S.A.). The four different types of amalgam were filled in occlusal and buccal class I cavities of four human 3rd molars. After about five years the restorations were carefully removed after tooth extraction to preserve the structural details including the deteriorated margins. The occlusal surface, amalgam-tooth interface and the fractured surface of in vivo amalgam corrosion products were analyzed. In vivo and in vitro amalgam specimens were examined and analyzed metallographically by SEM(Scanning Electron Microscope: JSM 840. Jeol Co. Japan) and EDAX(Energy Dispersive Micro X-ray Analyser: JSM 840. Jeol Co. Japan). 1. The following results are obtained from in vitro corrosion tests. 1) Corrosion potentials of all amalgams became more noble after ten times passing through the in vitro corrosion test compared to first time. 2) After times through the test, released Cu concentration in saline solution was almost equal but highest in Fine cut. Ag and Hg ion concentration was highest in Caulk spherical and Sn was highest in Dispersalloy. 3) Analyses of surface corrosion products in vitro reveal the following results. a)The corroded surface of Caulk spherical has Na-Sn-Cl containing clusters of $5{\mu}m$ needle-like crystals and oval shapes of Sn-Cl phase, polyhedral Sn oxide phase. b)In Fine cut, there appeared to be a large Sn containing phase, surrounded by many Cu-Sn phases of $1{\mu}m$ granular shapes. c)Dispersalloy was covered by a thick reticular layer which contained Zn-Cl phase. d)In Tytin, a very thin, corroded layer had formed with irregularly growing Sn-Cl phases that looked like a stack of plates. 2. The following results are obtained by an analysis of in vivo amalgam corrosion products. 1) Occlusal surfaces of all amalgams were covered by thick amorphous layers containing Ca-P elements which were abraded by occlusal force. 2) In tooth-amalgam interface, Ca-P containing products were examined in all amalgams but were most clearly seen in low copper amalgams. 3) Sn oxide appeared as a polyhedral shape in internal space in Caulk spherical and Fine cut. 4) Apical pyramidal shaped Sn oxide and curved plate-like Sn-Cl phases resulted in Dispersalloy. 5) In Tytin, Sn oxide and Sn hydroxide were not seen but polyhedral Ag-Hg phase crystal appeared in internal space which assumed a ${\beta}_l$ phase.

  • PDF