The effects of an addition of $ZrO_2$ on the microstructure and electrical properties of MgO films as a protective layer for AC plasma display panels were investigated. MgO + a 200 ppm $ZrO_2$ protective layer prepared by e-beam evaporation exhibited a secondary electron emission coefficient ($\gamma$) that was improved by 21% compared to that of a pure MgO protective layer. The relative density and Vickers hardness increased with a further addition of $ZrO_2$. These results suggest that the discharge properties and optical properties of MgO protective layers are closely related to the relative density and Vickers hardness. The good optical and electrical properties of $\gamma$, at 0.080, a grain size of $19\;{\mu}m$ and an optical transmittance of 91.93 % were obtained for the MgO + 200 ppm $ZrO_2$ protective layer sintered at $1700^{\circ}C$ for 5 hrs.
우리 나라에서 재배하여 생산한 식용 지하 부위 채소 (감자, 고구마, 당근, 무, 우엉, 연근, 양파, 생강, 마늘)의 수확시기에 따른 무기 성분의 차이와 중금속 함유 여부를 알아보기 위하여 그 성분들을 분석하였다. 모든 시료에서 가장 많이 함유된 무기 성분은 K이었으며, P와 Ca, Mg 순으로 많이 함유되었다. 각각의 무기 성분 함량은 모든 시료마다 다르게 나타났다. 감자는 다른 식용 지하 채소에 비해 Na과 Fe의 함량이 상대적으로 낮았고 K의 함량은 높게 나타났다. 고구마는 감자와 비교하면 6월과 8월의 시료에서 Ca을 2-3배 가량 많이 함유하고 있다. 당근은 Na의 함량이 감자나 고구마에 비하여 높게 나타났다. 무는 Ca의 함량이 높았는데 감자의 5-8배였고 다른 지하 부위 채소들과 비교하여도 2-3배 이상이나 되었다. 연근도 Ca의 함량이 높았으며 Mn의 함량은 분석한 시료들 중 가장 높았다. 마늘은 K와 P의 함량이 상대적으로 높았고 생강은 Mg 함량이 분석한 시료들 중 가장 높았다. 양파에는 K, P, Ca의 함량이 타 채소에 비하여 상대적으로 낮게 나타났고 Mg은 높았다. 계절별로 비교해 보면 6월과 8월의 시료들이 10월의 시료들에 비하여 여러 무기 성분의 함유도가 높게 나타났다.
우리 나라에서 재배하여 생산한 식용 지하 부위 채소들(감자, 고구마, 당근, 무, 양파, 마늘)의 생산지역에 따른 무기질 성분의 차이와 중금속 함유 여부를 알아보기 위하여 그 성분을 분석하였다. 먼저 microwave digestion oven에서 시료를 HNO$_3$ 4ml(65%)과 $H_2O$$_2$1ml(30%)로 용액 화하여 hot plate에서 시료를 1 ml까지 휘발시켜서 1% HNO$_3$로 희석한 후 ICP-AES로 무기질 성분을 정성, 정량 분석하였다. 모든 시료에서 가장 많이 분석된 무기성분은 K이었으며 각각의 성분 함유도는 모든 시료마다 다르게 나타났다. 감자는 다른 식용지하 부위 채소에 비해 Na와 Fe의 함량이 상대적으로 낮게 분석되었는데 K, P, Mg순의 함량을 보였고 K은 김포 지방산이, Ca는 삼척 지방산이 많이 함유한 것으로 조사되었다. 고구마는 분석한 거의 모든 지역에서 Ca 함량이 감자의 두 배 이상으로 높게 나타났다. 당근은 Na 함량이 다른 채소에 비해 높았으며 특히 진부 지방산이 많이 함유하고 있었다. 무는 K, Ca, P, Mg 순으로 함량이 높았는데 특히 양구 지방산이 높게 나타났다. 또한 Ca의 함량이 높았는데 감자의 5-8배였고, 다른 지하 부위 채소와 비교하여도 2-3배 이상이었다. 양파는 K, P Ca의 함량이 타 채소에 비해 낮게 분석되었었는데 지역별 차이는 많지 않았으며 문경 지방산이 Ca의 함량이 높았다. 마늘의 경우 K의 함량은 의성 지방산이, Ca의 함량은 서산 지방산이 높았으며 K과 P의 함량이 상대적으로 높았다.
원자력 발전소에서 발생하는 고체 방사성 폐기물인 이온교환수지, 제올라이트, 활성탄 및 슬러지 에 포함된 성분 원소 분석을 위한 산분해 조건을 확립하였다. 방사성 폐기물의 분해 에는 흔합산을 이용한 밀폐형 극초단파 산분해법을 사용하였으며, 제안한 방법에 따른 산분해 후의 용액은 맑고 색이 없는 투명한 상태임을 확인할 수 있었다. 또한, 산분해 과정을 거친 각각의 용액 시료는 ICP-AES와 AAS를 사용하여 분석하였고, 모의 방사성 폐기물에 첨가한 5종의 금속 원소들은 $94{\%}$ 이상의 높은 회수율을 보여주었다. 화학적 특성을 고려하여 제안된 산분해 조건에 의해 용액화된 중${\cdot}$저준위 방사성 폐기물의 성분 원소 분석은 최적의 유리화 기술 개발을 위한 기초 자료로 유용하게 사용될 수 있을 것으로 판단된다.
Nanocrystalline diamond(NCD) coated aluminium plates were prepared and applied as heat sinks for LED modules. NCD films were deposited on 1 mm thick Al plates for times of 2 - 10 h in a microwave plasma chemical vapor deposition reactor. Deposition parameters were the microwave power of 1.2 kW, the working pressure of 90 Torr, the $CH_4/Ar$ gas ratio of 2/200 sccm. In order to enhance diamond nucleation, DC bias voltage of -90 V was applied to the substrate during deposition without external heating. NCD film was identified by X-ray diffraction and Raman spectroscopy. The Al plates with about 300 nm thick NCD film were attached to LED modules and thermal analysis was carried out using Thermal Transient Tester (T3ster) in a still air box. Thermal resistance of the module with NCD/Al plate was 3.88 K/W while that with Al plate was 5.55 K/W. The smaller the thermal resistance, the better the heat emission. From structure function analysis, the differences between junction and ambient temperatures were $12.1^{\circ}C$ for NCD/Al plate and $15.5^{\circ}C$ for Al plate. The hot spot size of infrared images was larger on NCD/Al than Al plate for a given period of LED operation. In conclusion, NCD coated Al plate exhibited better thermal spreading performance than conventional Al heat sink.
전기방사법(Electrospinning technique)을 이용하여 PVdF-HFP(Poly vinylidene fluoride-co-hexafluoropropylene) 멤브레인을 제조하고, 그 멤브레인 표면위에 DLC(Diamond-like carbon) 코팅공정을 적용하여 멤브레인의 표면변화 및 접촉각 변화를 조사하였다. Ar 플라즈마 처리시간 및 처리조건에 따라 PVdF-HFP 멤브레인 파이버 표면이 주름(wrinkles)형태로 변화 하였다. 이러한 Ar 플라즈마 처리가 된 PVdF-HFP 멤브레인은 초친수성(super-hydrophilic) 특성으로 변했지만, 초친수성 PVdF-HFP 멤브레인에 DLC 코팅공정을 적용하면 반대로 초소수성(super-hydrophobic) 특성으로 변화되었다. 이러한 특성을 가진 표면을 접촉각 측정과 XPS, FE-SEM 측정으로 분석하였다. 따라서 화학적 조성과 표면 형상에 의해 접촉각 특성을 가지는 것으로 확인하였다.
대구${\cdot}$경북지역의 상수원 및 공업용수로서 사용되고 있는 낙동강 중${\cdot}$상류지역 하천 표류수의 수질을 분석하고, 하상 퇴적층에 함유된 중금속과 유기물의 종류 및 함유량을 분석하였다. 시료 채취는 갈수기 중 6월 22, 23 양일간 안동댐 상류 청량산 도립공원 양삼교 밑을 제 1지점으로 하여, 경북 지방을 통과하는 낙동강의 최하단인 고령군 고령교까지, 주로 공단의 전후 및 하천의 합류 지점을 대상으로 총 10개 지점에서 실시하였다. 표류수의 분석은 표류수의 시험항목 중 암모니아성 질소, 아질산성 질소, COD 등 총 22개 항목에 대하여 수행하였으며, 퇴적층은 trichloroethylene 등의 유기물과 중금속 등 11개 항목에 대하여 분석하였다. 퇴적물 시료는 용출시험법 및 산분해법으로 각각 분석하여 결과를 비교하였으며, 시료 중 중금속 성분은 유도결합 플라스마 방출분광법으로 분석하였고, 기타 성분은 환경부기준 공정시험방법에 의하여 분석하였다.
Kim, Dae-Suk;Kim, Tae-Jun;Kim, Jun-Hyuk;Zeid, E. F. Abo;Kim, Yong-Tae
Journal of Electrochemical Science and Technology
/
제1권1호
/
pp.31-38
/
2010
In this study, we have demonstrated the fine structure effect of PdCo electrocatalyst on oxygen reduction reaction activity with different alloy composition and heat-treatment time. In order to identify the intrinsic factors for the electrocatalytic activity, various X-ray analyses were used, including inductively coupled plasma-atomic emission spectrometer, transmission electron microscopy, X-ray diffractometer, and X-ray Absorption Spectroscopy technique. In particular, extended X-ray absorption fine structure was employed to extract the structural parameters required for understanding the atomic distribution and alloying extent, and to identify the corresponding simulated structures by using FEFF8 code and IFEFFIT software. The electrocatalytic activity of PdCo alloy nanoparticles for the oxygen reduction reaction was evaluated by using rotating disk electrode technique and correlated to the change in structural parameters. We have found that Pd-rich surface was formed on the Co core with increasing heating time over 5 hours. Such core shell structure of PdCo/C showed that a superior oxygen reduction reaction activity than pure Pd/C or alloy phase of PdCo/C electrocatalysts, because the adsorption energy of adsorbates was apparently reduced by lowering the dband center of the Pd skin due to a combination of the compressive strain effect and ligand effect.
Ash deposition of heat exchange boiler, caused mainly by accumulation of particulate matter, reduces heat transfer of the boiler system. Heat and mass transfer through porous media such as ash deposits mainly depend on the microstructure of deposited ash. Therefore, in this study, we investigated microstructural and thermal properties of the ash deposited on the boiler tube. Samples for this research were obtained from the fuel economizer tube in an industrial waste incinerator. To characterize microstructures of the ash deposit samples, scanning electron microscope (SEM), energy-dispersive spectroscopy (EDS), inductively coupled plasma optical emission spectroscopy (ICP-OES), X-ray diffraction (XRD) and BET analysis were employed. The results revealed that it had a porous structure with small particles mostly of less than a few micrometers; the contents of Ca and S were 19.3, 22.6% and 18.5, 18.7%, respectively. Also, the results showed that it consisted mainly of anhydrite ($CaSO_4$) crystals. - The thermal conductivities of the ash deposit sample obtained from the economizer tube in industrial waste incinerator were measured to be 0.63 and 0.54 W/mK at $200^{\circ}C$, which were about 100 times less than the thermal conductivity (61.32 W/mK) of the boiler tube itself, indicating that ash deposition on the boiler tube was closely related to a decrease in boiler heat transfer.
본 연구에서는 연속흐름 주입법에 의한 공침농축과 수소화물발생을 결합하여 유도결합 플라즈마 원자방출분광법에서 비소 이온을 고감도로 분석할 수 있는 방법을 개발하고 산화수에 따라 $As^{3+}와\;As^{5+}$를 분리하여 분석하였다. 미량의 비소시료는 In 공침제와 함께 공침되고 필터에 걸러진 후, 강산을 침전용해제로 사용하여 용리시켰다. 용리된 비소는 수소화물 발생장치에 들어가고 환원제와 혼합된 후 수소화물이 되어 ICP로 주입된다. 현재의 연속적 공침 농축-수소화물 발생법은 ICP를 단독으로 사용했을 때 보다 약 70배 정도의 감도를 높일 수 있었고, 이것은 공침농축이나 수소화물 발생법을 단독으로 사용한 것보다 각기 7배 및 10배 정도 높았다. 이것은 부피 0.3 mL의 1.0 ppm 용액에 대한 결과이며 만일 시료부피를 증가시킨다면 감도는 더욱 개선될 것이다. 시료의 측정횟수는 10 회/hr 이며 검출한계는 0.020 ${\mu}g\;L^{-1}(3{\sigma})$이고 정밀도는 7-10%이다. 또한, 시트르산을 이용하여 비소의 화학종간의 수소화물 발생의 차이를 만들어 시료내의 $As^{3+}\;와\;As^{5+}$ 이온을 분리정량해 낼 수 있었다.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.