• Journal of Korean Society of Water and Wastewater
• /
• v.21 no.5
• /
• pp.559-569
• /
• 2007

The purposes of this study were to find the main foulant of membrane and the optimal chemical cleaning method for MF(microfiltration) drinking water treatment system using D dam water as water source. The MF pilot plant which can treat maximum $500m^3/d$ consisted of 3 racks and was operated for 10 months under various operation conditions. After 10 months operation, $1^{st}$ and $2^{nd}$ rack of membrane pilot plant system were cleaned chemically and the degree of the restoration of the fouled membrane in terms of the pure water flux was detemnined. Inorganic compounds which contained in chemical cleaning waste was analyzed by Inductively Coupled Plasma (ICP). One membrane module for 3rd rack was disjointed and membrane fouling materials, especially inorganic compounds were investigated by Electron Probe Microanlysis (EPMA) to elucidate the reason of TMP increase. And also, the various chemical reagents (1N HCl or $H_2SO_4$, oxalic acid as acid and 0.3% NaOCl as alkali) were tested by combination of acid and alkali to determine the optimal chemical cleaning method for the MF system using micro-modules manufactured using the disjointed module. It was verified that the inside and outside of membrane module was colorized with black. As a result of the quantitative and semi-qualitative analysis of membrane foulant by ICP, most of inorganic foulant was manganese which is hard to remove by inorganic acid such as HCI. Especially, it was observed by EPMA that Mn was attached more seriously in inside surface of membrane than in outside surface of that. It was supposed that Mn fouling in inside surface of membrane might be caused by the oxidation of soluble manganese (Mn(II)) to insoluble manganese ($MnO_2$) by chlorine containing in backwashing water. The optimal cleaning method for the removal of manganese fouling was consecutive cleaning with the mixture of 1N HCl and 1% of oxalic acid, 0.3% NaOCl, and 1N HCl showing 91% of the restoration of the fouled membrane.

• Journal of the Korean Chemical Society
• /
• v.43 no.6
• /
• pp.636-643
• /
• 1999

Green-emission intensity of a $Zn_{2-x}Mn_xSiO_4$ phosphor, which is a potential candidate as a green component in PDP device, significantly increases provided that the compound is additionally heat treated at 900$^{\circ}C$ after solid state reaction at 1300$^{\circ}C$. In order to verify origin of such an intensity enhancement after the additional heat treatment in association with the electronic and local structural change at around Mn ions, the Mn K-edge X-ray absorption spectra were recorded. From the analyses of the preedge peak corresponding to $1s{\rightarrow}3d$ bound state transition and XANES spectrum, it is known that most Mn ions are in +2 oxidation state and substitute Zn ion site regardless of the thermal treatment. In addition, EXAFS analyses revealed that Mn ions formed $MnO_4$ tetrahedra with the Mn-O bond length shortened by 0.01${\AA}$ and with reduced Debye-Waller factor in the thermally treated sample.

• Journal of Genetic Medicine
• /
• v.5 no.1
• /
• pp.21-25
• /
• 2008

Purpose : In recent years, many countries have adopted newborn screening programs that use tandem mass spectrometry (MS/MS) to screen and the number of diseases screened has also increased. We began screening for inherited metabolic disorders using MS/MS in April, 2001. Our goal was to determine the overall prevalence of metabolic disorders and to assess the effectiveness of newborn screening by MS/MS in Korea. Methods : From April, 2001 to December, 2007, we screened newborns and high risk groups using MS/MS. Acylcarnitines and amino acids were extracted and butylated and were introduced into the inlet of MS/MS. Confirmatory testing including a repeat newborn screening, and urine organic acid and plasma amino acid analysis were performed on a case-by-case basis. Results : The total number of screened subjects 284,933 which comprised 251,799 neonates and 33,134 high risk subjects. The recall rate was 0.4% (1158 tests) and true positive cases were 117 (0.04%). Confirmed metabolic disorders (newborn/high risk group) were as follows; 78 (25/53) amino acid disorders, 27 (16/11) organic acid disorders, and 12 (5/7) fatty acid oxidation disorders. The estimated prevalence of inherited metabolic diseases in newborns was 1:5,000 and that in the total group was 1:2,000. Conclusion : Newborn screening by MS/MS improved the detection of many inherited metabolic disorders. We therefore propose that all newborns be screened by a MS/MS national program and followed-up using a systemic organization strategy.

• Journal of the Korean Magnetics Society
• /
• v.15 no.4
• /
• pp.246-249
• /
• 2005

The blue-color emitting phosphor powder, $CaMgSi_{2}O_6:Eu^{2+}(CMS:Eu^{2+})$ was synthesized by the solid-state reaction method. The synthesized powder was annealed from room temperature to $1,100^{\circ}C$ in air. Its PL property and valence state of Eu atoms was measured by the photoluminescence (PL) and the electron paramagnetic resonance (EPR) spectrometers, respectively. The PL intensity was stable to $700^{\circ}C$, but drastically decreased to $1,100^{\circ}C$. The behavior of EPR intensity was very similar to the PL intensity. The EPR measurement showed that decreased intensity of the PL was caused to the oxidation from the ion $Eu^{2+}$ to $Eu^{3+}$ ions. The EPR spectrometer was powerful as a tool that could distinguish between the valence states of Eu atom as a dopant in various phosphors.

• Nutrition Research and Practice
• /
• v.8 no.1
• /
• pp.27-32
• /
• 2014

This study investigated the influence of different durations of aerobic exercise on fuel utilization, lactate levels and antioxidative status in trained rats. Forty rats underwent physical training (T, n = 20) or non- training (NT, n = 20) for 6 weeks. For physical training, animals exercised on a treadmill for 30 min 5 days per week. At the end of week 6, the animals in each group were subdivided into BE, DE-0.5, DE-1 and DE-2, which were sacrificed at the end of week 6 without having performed exercise or after exercise on a treadmill for 0.5h, 1h and 2h, respectively, immediately before being sacrificed. The plasma glucose level in DE-2 of the NT group was significantly lower than in the other groups. Muscle and liver glycogen levels were significantly lower in DE-1 and DE-2, but there were no significant differences between DE-1 and DE-2 in the T group. Liver protein in DE-2 of the NT group was significantly lower. Muscle TG levels were decreased in DE-0.5 of the T group, while those of the NT group were decreased in DE-1. FFA levels were increased in DE-0.5 of the T group and in DE-1 of the NT group. Lactate levels were increased in DE-0.5 of the NT group, while they were increased in DE-1 of the T group. Catalase activity of the T group was lower in BE but higher in DE-0.5, DE-1 and DE-2. SOD activities were higher in trained rats, while the GSH/GSSG ratios were higher in BE, DE-0.5 and DE-1 in the T group, and there was no difference in that of DE-2. There were no differences in MDA levels in BE and DE-0.5, but they were significantly lower in DE-1 and DE-2 of the T group. Overall, the results of this study, suggest that training may improve exercise performance by facilitating the mobilization and oxidation of fat and conserving limited carbohydrate storage, and that it may delay the onset of fatigue and enhance the antioxidative defense system, but cannot support two hours of vigorous exercise.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2017.05a
• /
• pp.83-83
• /
• 2017

생체재료의 표면은 이식과 동시에 생체계면의 역할을 하게 되어, 일련의 생물학적 반응이 시작되고 진행되는 중요한 장소가 된다. 초기에 생체계면에서 일어나는 단백질 흡착이나 염증반응을 비롯한 생물학적 반응들은 궁극적으로 임플란트의 성패를 좌우할 만큼 중요하다. 골융합을 개선하기 위한 다른 방법으로 생체불활성의 타이타늄 (Ti)과 골조직의 능동적인 반응을 이루기 위해 생체활성 표면을 부여함으로서 계면에서의 골형성 반응을 증진시키는 방법이 이용된다. 생체불활성의 Ti과 Ti합금은 골조직과 직접적인 결합을 이루지 못하므로, 골조직과의 반응을 향상하기 위해 여러 종류의 생체활성 재료를 코팅하는 방법이 연구되어 왔고, 이 중 생체의 변화와 가장 유사한 하이드록시아파타이트 코팅이 가장 대중적인 방법으로 사용되었으며 이는 초기 골형성을 촉진하는 것으로 알려졌다. 치과용 임플란트의 표면형상과 화학조성이 골 융합에 영향을 미치는 가장 중요한 인자이므로 최근의 연구동향은 이들 두 가지 표면특성을 결합함으로서 결과적으로 최적의 골세포반응을 유도하고, 골융합 후 골조직과의 micromechanical interlocking에 의해 임플란트의 안정성에 중요한 역할을 하는 마이크론 단위의 표면조도와 표면 구조를 유지하면서, 부가적으로 골 조직 반응을 능동적으로 개선할 수 있는 생체활성 성분을 부여하여 골 융합에 상승효과를 이루기 위한 표면처리법에 관해 많은 연구가 요구되어지고 있다. 따라서 골을 구하는 원소인 망간과 실리콘으로 치환된 하이드록시아파타이트를 플라즈마 전해 산화법으로 코팅하여 세포와 잘 결합할 수 있는 표면을 제공함으로써 골 융합과 치유기간을 단축시킬 수 있을 것으로 사료된다. 실험방법은 시편은 치과 임플란트 제작 합금인 Ti-6Al-4V ELI disk (grade 5, Timet Co., USA; diameter, 10 mm, thickness, 3 mm)이며, calcium acetate monohydrate, calcium glycerophosphate, manganese(II) acetate tetrahydrate, sodium metasilicate을 설계조건에 따라 혼합 제조된 전해질 용액을 이용하여 플라즈마 전해 산화법으로 표면 코팅을 실시하였다. 각 시편의 플라즈마 전해시 전압은 280V로 인가하였고, 전류밀도는 70mA로 정전류를 공급하여 해당 인가전압 도달 후 3분 동안 정전압 방식을 유지하였다. 코팅된 피막 표면을 주사전자현미경과 X-선 회절분석을 통하여 미세구조 및 결정상을 관찰하였다. 또한 코팅된 표면의 생체활성 평가는 정량적으로 평가하기 위해 동전위시험과 AC 임피던스를 통하여 시행하였다. 분극거동을 확인하기 위해 potentiostat (Model PARSTAT 2273, EG&G, USA)을 이용하여 구강 내 환경과 유사한 $36.5{\pm}1^{\circ}C$의 0.9 wt.% NaCl에서 실시하였다. 전기화학적 부식 거동은 potentiodynamic 방법으로 조사하였고 인가전위는 -1500 mV에서 2000 mV까지 분당 1.67 mV/min 의 주사속도로 인가하여 시험을 수행하였다. 임피던스 측정은 potentiostat (Model PARSTAT 2273, EG&G, USA)을 이용하였으며, 측정에 사용한 주파수 영역은 10mHz ~ 100kHz 까지의 범위로 하여 조사하였고 ZSimWin(Princeton applied Research, USA) 소프트웨어를 사용하여 용액의 저항, 분극 저항 값을 산출하였다. 망간의 함량이 증가할수록 불규칙한 기공을 보였으며, 실리콘은 $TiO_2$ 산화막 형성을 저해하는 경향을 확인할 수 있었다. 단독으로 표면을 처리한 경우보다 두 가지 원소를 이용해 복합 표면처리를 시행한 경우가 내식성이 좋아 임플란트과의 골 유착에 긍정적인 영향을 미칠 것으로 사료된다.

• Journal of the Korean Vacuum Society
• /
• v.21 no.6
• /
• pp.328-332
• /
• 2012

The work function of Ag (silver) is too low (~4.3 eV) to be used as an electrode of T-OLED (Top Emission Organic Light Emitting Diode). To solve this weakness, researches used plasma-, UV-, or thermal treatment on Ag films in order to increase the work function (~5.0 eV). So, most of studies have focused only on the work function of various treated Ag films, but studies focusing on nanomechanical properties were very important to investigate the efficiency and life time of T-OLED etc. In this paper, we focused on the mechanical properties of the Ag and $AgO_x$ film. The Ag was deposited on a glass substrate with the thickness of 150 nm by using rf-magnetron sputter with the power was fixed at 100 W and working pressure was 3 mTorr. The deposited Ag film was UV treated by UV lamp for several minutes (0~9 min). We measured the sheet resistance and mechanical property of the deposited film. From the experimental result, there were some differences of the sheet resistance and surface hardness of Ag thin film between short time (0~3 min) and long time UV treatment. These result presumed that the induced stress was taken place by the surface oxidation after UV treatment.

• Journal of the Korean institute of surface engineering
• /
• v.53 no.2
• /
• pp.59-66
• /
• 2020

Effects of Na₂SiO₃ concentration added into 0.1 M NaOH + 0.05 M NaF solution on the formation behavior and properties of PEO films on AZ91 Mg alloy were investigated under 1200 Hz of alternating current (AC) by voltage-time curves, in-situ observation of arc generation behavior and measurements of film thickness, surface roughness and micro vickers hardness. In the absence of Na₂SiO₃ in the 0.1 M NaOH + 0.05 M NaF solution, about 4 ㎛ thick PEO film was formed within 1 min and then PEO film did not grow but white spots were formed by local burning. Addition of Na₂SiO₃ up to 0.2 M caused more increased formation voltage and growth of PEO film with uniform generation of arcs. Addition of Na₂SiO₃ from 0.2 M to 0.4 M showed nearly the same voltage-time behavior and uniform arc generation. Addition of Na₂SiO₃ more than 0.5 M resulted in a decrease of formation voltage and non-uniform arc generation due to local burning. PEO film growth rate increased with increasing added Na₂SiO₃ concentration but maximum PEO film thickness was limited by local burning if added Na₂SiO₃ concentration is higher than 0.5 M. Surface roughness of PEO film increased with increasing added Na₂SiO₃ concentration and appeared to be proportional to the PEO film thickness. PEO film hardness increased with increasing added Na₂SiO₃ concentration and reached a steady-state value of about 930 H_V at more than 0.5 M of added Na₂SiO₃ concentration.

• Journal of the Korean Magnetics Society
• /
• v.11 no.5
• /
• pp.189-195
• /
• 2001

We prepared TMR junctions of NiFe(170 )/CoFe(48 )/Al(13 )-O/CoFe(500 )/Ta(50 ) structure on 2.5$\times$2.5 $\textrm{cm}^2$ area Si/SiO$_2$ substrates in order to investigate the uniformity of magnetoresistance(MR) value using a ICP magnetron sputter. Each layer was deposited by the ICP magnetron sputter and tunnel barrier was formed by the plasma oxidation method. We measured MR ratio and resistance of TMR devices with four-terminal probe system by applying external magnetic field. Although we used ICP sputter which is known as superior to make uniform films, the standard variation of MR ratio was 2.72. The variation was not dependent on the TMR devices location of a substrate. We found that MR ratio and spin-flip field (H's) increased as the resistance increased, which may be caused by local interface irregularity of the insulating layer. The variation of resistance value was 64.19 and MR ratio was 2.72, respectively. Our results imply that to improve the insulating layer fabrication process including annealing process to lessen interface modulation in order to mass produce the TMR devices.

• Korean Journal of Community Nutrition
• /
• v.7 no.2
• /
• pp.257-265
• /
• 2002

This study was performed to investigate the effect of kimchi intake on free radical and oxidative substance production in young adults and the elderly. Daily kimchi intake by people in their twenties (n = 93, 20 to 29 years old) and over sixty-five (n = 143, over 65 years old) in M city were surveyed and blood was drawn to analyze the free radicals in their plasma. The average amount of kimchi intake by the subjects was 115.8 $\pm$ 91.7 g. The amount of kimchi intake of those in their twenties (106.1 $\pm$ 80.6 g) was significantly lower than that of those over sixty-five (125.5 $\pm$ 102.9 g, p < 0.05). Concentrations of total free radicals and OH radicals were 27 and 33% greater respectively, in those over sixty-five than in those in their twenties, indicating that more free radicals were produced by the older group. The concentration of GSH was not signiacantly different in the two groups, but that of GSSG in the over sixty-five age group was 53% greater than in the twenties group, which resulted in a 35% reduction in GSH/GSSG in the elderly group. TBARS concentration in the over sixty-five group was 26% greater than that of the twenties group. In order to see the effect of kimchi intake on free radical production, subjects in same age group were divided into two sub groups-the mean over and the mean under groups-according to the average amount of kimchi intake, which was 115.8 g. The total free radicals, the OH radicals, the GSH, the GSSG, and the GSH/GSSG in the twenties group were not significantly different in the two kimchi intake groups. However, those in the over sixty-five group were significantly different. The concentration of total free radicals and OH radicals of the mean over group were 21 and 26% lower respectively, than those of the mean ova. group (p < 0.05). The GSH and GSH/GSSG of the mean ova. groups were higher by 8 and 12%, respectively. The correlation coefficient between the kimchi intake and the total free radicals was -0.1862 (p < 0.05) and that for GSH/GSSG was 0.1861 (p < 0.05). In conclusion, the production of free radicals and oxidative substances increased with age, and kimchi seemed to retard this phenomena.