• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2002년도 International Meeting on Information Display
• /
• pp.586-589
• /
• 2002

The Ultra Violet(UV) emission characteristics of Neon + Nitrogen gas-mixture discharge was investigated in AC plasma display panel. The firing voltage of Ne+$N_2$ gas-mixture discharge increased with increasing nitrogen concentration. The UV intensity emitted from the gas discharge also increased with increasing nitrogen concentration. The UV efficiency increase with increasing $N_2$ partial pressure at low $N_2$ concentration, and then UV efficiency is saturated at high $N_2$ concentration.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2000년도 제1회 학술대회 논문집
• /
• pp.99-100
• /
• 2000

We measured 3-dimensional images of the light emitted from plasma display panel by using newly proposed scanned point detecting method (SPDM). From the 3-dimensional emission images, we know that as the sustain voltage increases, intensity of light detected without phosphor increases and the position of the maximum intensity moves to the outside from the electrode gap. Also, we know that 2-dimensional simulations under the assumption that neglects the Y axis variation do not agree with 3-dimensional experiment results.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2005년도 International Meeting on Information Displayvol.I
• /
• pp.625-630
• /
• 2005

In this paper, several energy recovery circuits (ERC) for the plasma display panel (PDP) are reviewed and classified in a manner of operation characteristics. A typical ERC using the Regenerative Transformer (RT) is introduced and compared with conventional ones. RT-ERC can achieve zero-voltage-switching (ZVS) for main full-bridge switches and zero-current-switching (ZCS) for the resonant switches and diodes. The charging/discharging energy of panel capacitance is efficiently recovered with the RT and without a sub-circuit. The presented circuit is verified with simulation and experimental results.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2009년도 9th International Meeting on Information Display
• /
• pp.744-747
• /
• 2009

Plasma Display Panels (PDPs) have illustrated impressive results in terms of light emission efficiency of the Ne-Xe mixture compared with the He-Xe mixture. However, He-Xe has shown to achieve superior color purity. This paper presents the optimization of excitation efficiency and color purity for He-Ne-Xe ternary gas mixtures. Furthermore, we investigate the effect that a protective dielectric layer has on UV photon efficiency in a matrix known as electrode type PDP.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2000년도 전력전자학술대회 논문집
• /
• pp.674-677
• /
• 2000

Operational principles and driving characteristics of two well-known energy recovery circuits for ac plasma display panels Weber and Sakai circuits are investigated Efficiency of two circuits is analyzed by comparing the in put current of the circuits with different operating conditions. Driving characteristics of the Weber circuit are studied when the magnitude and pulse width of the driving boltage very.

• 반도체디스플레이기술학회지
• /
• 제2권4호
• /
• pp.13-17
• /
• 2003

An adaptor is designed for chamber impedance measurement of plasma process. Copper rod, fixed board and compensation circuit are the major components of the adaptor. An adaptor can be to measure chamber impedance on time unless stopping a process and Data to measure can do the database. We can use it to a criteria data for a failure diagnosis. So developed adaptor could be used for diagnosis the plasma process chamber in semiconductor industry.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2007년도 7th International Meeting on Information Display 제7권1호
• /
• pp.933-936
• /
• 2007

An inductively coupled plasma source with internaltype linear inductive antennas named as "multiple Utype antenna" was developed for the substrate size of $2,300mm\;{\times}\;2,000mm$. High density plasmas on the order of $1.18\;{\times}\;10^{11}\;cm^{-3}$ could be obtained and the RF power of 8kW with good plasma stability.

• Journal of Power Electronics
• /
• 제7권4호
• /
• pp.278-285
• /
• 2007

Recently, plasma display panels (PDP) have become the most promising candidate in the market for large screen size flat panel displays. PDPs have many merits such as a fast display response time and wide viewing angle. However, there are still concerns about high cost because they require complex driving circuits composed of high power switching devices to generate various voltage waveforms for three operational modes of reset, scan, and sustain. Conventional PDP driving circuits use path switches for voltage separation and a scan switch to offer a scan voltage for reset and scan operations, respectively. In addition, there exist reset switches to initialize PDPs by regulating the wall charge conditions with ramp shaped pulses, which means the necessity of specific power devices for the reset operation. Because power for the plasma discharge accompanied by a large current is transferred to a panel via path switches, high power rating switches are used for path switches. Therefore, this paper proposes a novel low-cost PDP driving scheme achieved by not only eliminating path switches but also merging the function of reset switches into other switches used for sustain or scan operations. The simulated voltage waveforms of the proposed topology and experimental results implemented in a 42-inch panel to demonstrate the validity of using a new gate driver that merges the functions of power switches are presented.

• 한국세라믹학회지
• /
• 제44권1호
• /
• pp.65-69
• /
• 2007

For self-developed alkali-alkaline earth-silicate and commercial glass melts for plasma display panel substrate, the corrosion behavior of fused casting refractory consisting of $Al_2O_3-ZrO_2-SiO_2$ was examined at the temperature corresponding to $10^2\;dPa{\cdot}s$ of melt viscosity by static finger methode. The corroded refractory specimens showed a typical concave shape due to interfacial convection of melts at their flux line. However, the corrosion thickness by commercial glass melts was $6\sim10$ times comparing to that by the self?developed melts. From the view point of the glass composition and the role of alkaline earth in glass network, it was discussed the effect of alkali/alkaline earth diffusion and temperature on the refractory corrosion.

• 한국세라믹학회지
• /
• 제48권1호
• /
• pp.86-93
• /
• 2011

Transparent plasma display can be realized by developing the synthetic chemistry of appropriate nanophosphors and generating nanophosphor-based transparent luminescent layers. For this goal, red-emitting $Y(V_{0.5},\;P_{0.5})O_4$:Eu nanophosphors were synthesized by a facile hydrothermal route at $200^{\circ}C$ for 48 h and the resulting nanophosphors were subsequently annealed at $800^{\circ}C$ at an ambient atmosphere. The crystallographic structure, morphology, and emission property of the as-synthesized and annealed nanophosphors were compared. Choosing 2-methoxyethanol as a dispersion medium and applying a standard sonication, well-dispersed nanophosphor solutions could be prepared. Using these dispersions, visible transparent nanophosphor layers were spin-deposited on glass substrates. By combining $Y(V_{0.5},\;P_{0.5})O_4$:Eu nanophosphor layer/glass substrate as a rear plate with a front plate used in a conventional plasma display panels (PDPs), mini-sized transparent red-emitting PDPs were constructed. Transmittance and luminance properties of two transparent test panels using as-synthesized versus $800^{\circ}C$-annealed nanophosphors were characterized and compared.