• 생명과학회지
• /
• 제27권7호
• /
• pp.812-816
• /
• 2017

적색 아조류 타르색소인 아마란스는 인공식용색소로 식품, 화장품, 의약품에 광범위하게 사용되고 있음에도 불구하고, 경구로 복용하였을 때 위장관 흡수율이나 흡수특성에 대해 연구된 바가 없다. 본 연구의 목적은 아마란스의 정맥투여 또는 경구 투여 후 약동학 특성을 평가하고 diffusion chamber system을 이용하여 위장관 흡수율 및 투과도를 평가하고자 하였다. 정맥투여된 아마란스는 38.8분의 소실반감기로 빠르게 혈중에서 소실된다. 그러나 경구투여된 아마란스는 생체이용률도 55.6%로 높은 위장관 흡수율을 나타내며 408분까지 혈중농도가 증가하고 24시간까지 혈중에 남아있는 특성을 나타내었다. 이는 아마란스의 위장관 흡수가 오랫동안 지속적으로 일어나는 것을 의미한다. 이를 확인하기 위하여 소장의 흡수부위를 공장, 회장사부, 회장하부로 나누어 위장관 투과도를 평가하고 투과성이 잘 알려진 지표물질과 비교하였다. 연구결과 아마란스의 위장관투과성은 투과도가 매우 높은 caffeine의 1/3정도의 투과도를 보이고, 중등도의 투과도를 보이는 atenolol과 유사한 투과도를 나타내었으며 회장상부에서의 투과도가 가장 높았다. 결과를 종합하면, 아마란스는 경구투여된 뒤 지속적으로 흡수되며 흡수율도 50% 이상을 보이므로, 식품, 립케어 화장용품, 경구용 의약품에 아마란스 등의 색소가 포함될 경우에는 첨가량 등을 고려하여 신중하게 사용해야 할 것이다.

• Journal of the Optical Society of Korea
• /
• 제16권1호
• /
• pp.80-84
• /
• 2012

A high reflectance mirror, which has very low absorption and scattering loss, was coated onto a crystalline substrate by ion beam sputtering and then annealed at $450^{\circ}C$. We carefully selected the mirror coating material, and designed the high reflectance mirror, in order to avoid UV degradation which comes from the He-Ne plasma. We measured the surface roughness of the Zerodur substrate using phase shift interferometry and atomic force microscopy, and compared it with the TIS scattering of the mirror. The cavity ring-down method was used to measure the absorption of the mirror, and the thin film structure was correlated to its results. We also compared the optical properties of coated mirrors before and after annealing.

• 한국진공학회지
• /
• 제7권s1호
• /
• pp.134-139
• /
• 1998

Amorphous fluorocarbon (a-C:F) is of interest for low dielectric interlayer material, but in this work we applied this material to FED field emitter. N-doped a-C:F films were deposited by inductively coupled plasma chemical vapor deposition (ICPCVD). The Raman spectra were measured to study the film structure and inter-band optical absorption coefficients were measured using Perkin-Elmer UV-VIS-IR spectrophotometer and optical band gap was obtained using Tauc's plot. XPS spectrum and AFM image were investigated to study bond structure and surface morphology. Current-electric field(I-E) characteristic of the film was measured for the characterization of electron emission properties. The optimum doping concentration was found to be [N2]/[CF4]=9% in the gas phase. The turn-on field and the emission current density at $[N_2]/[CF_4]$=9% were found to be 7.34V/$\mu\textrm{m}$ and 16 $\mu\textrm{A}/\textrm{cm}^2$ at 12.8V/$\mu\textrm{m}$, respectively.

• Journal of Electrical Engineering and Technology
• /
• 제5권2호
• /
• pp.264-269
• /
• 2010

This paper presents the analysis of the dielectric characteristics of a hot $SF_6$ gas in a gas circuit breaker. Hot gas flow is analyzed using the FVFLIC method considering the moving boundary, material properties of real $SF_6$ gas, and arc plasma. In the arc model, the re-absorption of the emitted radiation is approximated with the boundary source layer where the re-absorbed radiation energy is input as an energy source term in the energy conservation equation. The breakdown criterion of a hot gas is predicted using the critical electric field as a function of temperature and pressure. To validate the simulation method, breakdown voltage for a 145kV 40kA circuit breaker was measured for various conditions. Consistent results between the simulation and experiment were confirmed.

• 접착 및 계면
• /
• 제2권2호
• /
• pp.1-10
• /
• 2001

Epoxy molding compound (EMC)에 사용되는 실리카를 13.56 MHz 플라즈마 중합 장치를 이용하여 코팅하였으며, 코팅시간, 플라즈마전압, 내부압력을 변화시키면서 코팅조건을 최적화하였다. 플라즈마 중합 코팅용 단량체로는 1.3-diaminopropane, allylamine, pyrrole, 1,2-epoxy-5-hexene, allylmercaptan 및 allylalcohol을 사용하였으며, 코팅된 실리카의 접착성은 굴곡강도 측정으로 분석하였다. 또한 열팽창 계수 (CTE) 및 수분 흡습률 변화를 측정하였으며, 파괴 단면을 SEM으로 분석하여 접착 특성을 규명하고자 하였다. 플라즈마 중합 코팅된 실리카와 에폭시 수지간의 접착기구를 규명하기 위하여 플라즈마 고분자 코팅을 FT-IR로 분석하였으며, DSC를 이용하여 코팅된 실리카와 에폭시 수지간의 반응성도 고찰하였다. 1,3-diaminopropane과 allylamine으로 코팅된 실리카를 함유하는 EMC는 비교시편에 비하여 높은 굴곡강도, 낮은 CTE 및 낮은 흡습율을 보였으며, SEM 분석 결과 100% cohesive failure 거동을 나타내었다. 이러한 결과는 고분자 코팅내의 아민 반응기와 에폭시 수지간의 화학적 결합에 의한 것으로 판단되며, FT-IR 및 DSC 분석결과와 부합된다.

• Asian-Australasian Journal of Animal Sciences
• /
• 제14권3호
• /
• pp.358-364
• /
• 2001

The physiochemical properties and interactions between porcine blood and waxy rice were determined. Addition of calcium chloride (0.15%) improved acceptability of blood cake and increased the gelatinization degree of waxy rice. The water-holding capacity of porcine blood gel (blood/water=60/40, v/v), extent of absorption and gelatinization of waxy rice, and scanning electron microscopy showed that blood protein matrix and waxy rice are competitors for holding water in the cooking procedure. Non-haem iron content increased linearly (R=0.95) when heating temperature rose. The presence of blood proteins caused increasing of peak temperature (Tp) of gelatinization in differential scanning calorimetric thermal gram, The microstnlcture of plasma proteins and haemoglobin appeared continuous changes, and interacted with surface of waxy rice flour in terms of network and mosaic form, respectively. The electrophoretic patterns revealed an interaction between plasma proteins and waxy rice glutelin and haemoglobin when heated could be found at temperatures above $60^{\circ}C$.

• 한국진공학회지
• /
• 제12권S1호
• /
• pp.88-91
• /
• 2003

Electromagnetic interference shielding and near-infrared cutoff filters for plasma display panel application were designed and fabricated by radio frequency magnetron sputtering. Three types of the filters were prepared: the basic structure of type A consisted of [$TiO_2$ Ti Ag $TiO_2$]; type B, of [$TiO_2$ ITO Ag $TiO_2$]; type C, of [$TiO_2$ ITO Ag ITO $TiO_2$]. Ti and ITO layers deposited on Ag layers were employed as barriers to prevent the oxidation and the diffusion of Ag film into the adjacent oxide layers. Optical, electrical, chemical, and structural properties were investigated, and the result shows that the filters with the ITO barrier layers provided an enhancement in transmittance in the visible owing to a lower absorption of ITO layers than Ti layers. Type C filter showed better optical and electrical performances and smoother surface roughness than Type B and C filters: the average sheet resistance was as low as 1.51 $\Omega\Box$ (where $\square$ stands for a square film), the peak transmittance in the visible was as high as 78.2 %, and the average surface roughness was 1.48 nm.

• Journal of electromagnetic engineering and science
• /
• 제18권1호
• /
• pp.63-69
• /
• 2018

This work demonstrates attenuation effects of plasma on waves propagating in the 26.5-40 GHz range. The effect is investigated via experiments measuring the transmission between two Ka-band horn antennas set 30 cm apart. A dielectric-barrier-discharge (DBD) plasma generator with a size of $200mm{\times}100mm{\times}70mm$ and consisting of 20 layers of electrodes is placed between the two antennas. The DBD generator is placed in a $400mm{\times}300mm{\times}400mm$ acrylic chamber so that the experiments can be performed for plasma generated under various conditions of gas and pressure, for instance, in air, Ar, and He environments at 0.001, 0.05, and 1 atm of pressure. Attenuation is calculated by the difference in the transmission level, with and without plasma, which is generated with a bias voltage of 20 kV in the 0.1-1.4 kHz range. Results show that the attenuation varies from 0.05 dB/m to 9.0 dB/m depending on the environment. Noble gas environments show higher levels of attenuation than air, and He is lossier than Ar. In all gas environments, attenuation increases as pressure increases. Finally, electromagnetic models of plasmas generated in various conditions are provided.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2016년도 제50회 동계 정기학술대회 초록집
• /
• pp.295-295
• /
• 2016

Recently, TCO films with low carrier concentration, high mobility and high work function are proposed beneficial as front electrode in HIT solar cell due to free-carrier absorption in NIR wavelength region and low Schottky barrier height in the front TCO/a-Si:H(p) interface. We report high transmittance and work function zirconium-doped indium tin oxide (ITO:Zr) films with various plasma (Ar/O2 and Ar) conditions. The role of (Ar/O2) plasma was to enhance the work function of the ITO:Zr films whereas the pure Ar plasma based ITO:Zr showed good electrical properties. The RF magnetron sputtered ITO:Zr films with low resistivity and high transmittance were employed as front electrode in HIT solar cells, yield the best performance of 18.15% with an open-circuit voltage of 710 eV and current density of 34.63 mA/cm2. The high work function ITO:Zr films can be used to modify the front barrier height of HIT solar cell.

• Bulletin of the Korean Chemical Society
• /
• 제35권8호
• /
• pp.2453-2459
• /
• 2014

Five novel cyanine dyes containing julolidine and indole moieties were synthesized. Several color compensating films for plasma display panels (PDP) were prepared using these dyes. The spectroscopic and physicochemical properties of the synthesized dyes in both solution and film state were evaluated. For each color compensating film, the optimum ratio of dye to binder was determined on the basis of transmittance, half band width, and photo-stability of the color compensating film. The five synthesized dyes showed sharp absorption peaks near 590 nm (orange light) and had molar extinction coefficients above $1{\times}10^5M^{-1}cm^{-1}$. The melting point of the dyes was above $200^{\circ}C$ and photo-stability of the color compensating films was improved by introducing substituents at the 5th position on the indole derivatives.