• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2003.06a
• /
• pp.401-404
• /
• 2003

This paper investigates the effect of plasma treatment of aluminum on the fracture toughness of aluminum/CFRP composites, The surface of the aluminum panel was treated by a DC plasma. The plasma treatment was carried out at volume ratio of acetylene gas to nitrogen gas of 5:5 and the treatment times used was 30 sec. The fracture toughness of plasma-treated aluminum/CFRP' composites was compared with that of untreated aluminum/CFRP composites and The fracture surface of aluminum/CFRP composites was compared with SEM. The results showed that fracture toughness of plasm-treated aluminum/CFRP composites was about 50% higher than that of untreated aluminum/CFRP composites.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2009.06a
• /
• pp.301-302
• /
• 2009

The Green emitting OLED was fabricated with the structure of ITO(plasm treatment)/TPD($400\;{\AA}$)/$Alq_3(600\;{\AA})$/LiF($5\;{\AA}$)/Al($1200\;{\AA}$). Turn-on voltage of PMOLED was 7 V and luminance was 7,371 cd/$m^2$ at the RF power of 25W. O2 plasma treatment of ITO surface was result in lowering the operating voltage and improving luminance of green OLED.

• Journal of the Korean Vacuum Society
• /
• v.6 no.S1
• /
• pp.16-22
• /
• 1997

ion beam processing of materials for medical application has gained increasing interest in the last decade and the implantation of nitrogen into TI-6AI-4V to improve corrosive-wear performance is currently used for processing of total hip and knee joints. Oxides and nitrides of Ti, Zr, Al, Cr were deposited on TI-6AI-4V substrates by DC magnetron sputtering dual ion beam sputtering and ion beam assisted deposition. The cytotoxicity of these films were investigated by MTT method and showed comparable to untreated TI-6AI-4V Plasm-sprayed hydroxyapatite(HAp) coatings showed excellent cytotoxicity regardless of heat treatment. intermediate layer coatings of nitrides and oxides increased the bond strength of HAp to substrate by intrdducing chemical bond at interface. Heat treatment of HAp coatings also improved the chemical bond at interfaces and increased the bond strength of untreated TI-6AI-4V to 16.4 kg/$\textrm{cm}^2$ but still lower than 33.1 kg./$\textrm{cm}^2$ of ir oxide as a imtermediate layer caoting.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.22 no.1
• /
• pp.81-85
• /
• 2009

We has been analysed optical properties of OLED(organic light emitting diode) and characteristics of ITO(Indium Tin Oxide) in terms of $O_2$ plasma treatment for manufacturing high efficiency OLED, RF power of $O_2$ plasma was changed 25, 50, 100, 200 W. $O_2$ gas flow, gas pressure and treatment time were fixed. Sheet resistance and surface roughness of ITO were measured by Hall-effect measurement system and AFM, respectively. The ranges of sheet resistance and surface roughness were $5.5{\sim}6,06\;{\Omega}$ and $2.438{\sim}3.506\;nm$ changing of RF power, respectively, PM(Passive Matrix)OLED was fabricated with the structure of ITO(plasm treatment)/TPD($400\;{\AA}$)/$Alq_3(600\;{\AA})$/LiF($5\;{\AA}$)/Al($1200\;{\AA}$). Turn-on voltage of PMOLED was 7 V and luminance was $7,371\;cd/m^2$ at the RF power of 25 W, $O_2$ plasma treatment of ITO surface was result in lowering the operating voltage and improving luminance of PMOLED.

• Journal of the Korea Fashion and Costume Design Association
• /
• v.11 no.1
• /
• pp.43-51
• /
• 2009

The cotton, wool, cotton/wool blended(80:20) and tencel fabrics were treated with low temperature oxygen or argon plasma, enzymes(cellulase or protease), or oxygen plasma-enzyme and examined for their weight loss and conditions for treatment for the environment friendly finishing. In the plasma treatment argon gas had better effect on the weight loss than oxygen gas did and the weight loss of all the fabrics was increased as increasing discharge power and discharge time. The weight loss of cotton, wool, cotton/wool blended(80:20) fabrics decreased in a large measure after 1 hr but that of tencel didn't decrease after 1 hr. In case of cellulose fibers oxygen gas plasma induced chemical functional groups on the surface of substrate more than argon gas plasma did so the weight loss of wool was larger than that of cotton, tencel fabrics in oxygen plasma-enzyme treatment. The weight loss of cotton and tencel fabrics decreased the initial stage because oxygen plasma pre-treatment caused cross linking as well as etching effect but argon plasma pre-treatment didn't. The plasma pre-treatment cleared the way for enzyme treatment on the whole but oxygen plasma pre-treatment bear in hand the increase of weight loss more or less because of the cross linking on the surface of cellulose fibers. The appropriate conditions for plasma treatment was 10-1Torr, 40W for 30minutes and for cellulase treatment were enzyme concentration of $3g/{\ell}$, pH 5, $60^{\circ}C$ for 1hr and for protease treatment were enzyme concentration of $4g/{\ell}$ pH 8, $60^{\circ}C$ for 1hr.

• Journal of Embryo Transfer
• /
• v.15 no.1
• /
• pp.23-31
• /
• 2000

This study was conducted to investigate the effects of quiescent treatment of donor cells and activation treatment time of recipient cytoplasm on nuclear remodeling and in vitro development of somatic cell-cloned bovine embryos. Serum starved, confluent and nonquiescent cycling adult skin cells were teansferred into enucleated oocytes. Nuclear transfer oocytes were activated at 30 min, 1 and 2 hrs after electrofusion. Some nuclear transfer embryos(23% to 35%) extruded a polar body, which was not affected by quiescent treatment of donor cells and activiation time of recipient cytoplasm. About 68% of nuclear transfer embryos fused with a serum starved cells has a chromatin clump, but which was not different from embryos fused with confluent(51%) and nonquiescent(47%) cells. The proportion of embryos with a single chromatin clump was sightly increased when nuclear transfer embryos were activated within 30 min after fusion(69%) compared to those were activated at 1 and 2 hrs after fusion, but there was not significantly different. Development rates to the blastocyst stage were 8.6% and 15.9% when serum starved and confluent cells were transferred, which were higher than that of control group. Developmental rate to the blastocyst stage was higher in embryos were activated within 30 min after fusion (17.3%) compared to those of embryos were activated at 1 and 2 hrs after fusion (P<0.05). From the present result, it is suggested that quiescent treatment of donor cells and activation time of recipient cytoplasm can affect the in vitro development. Quiescent plasm activation within 30 min after fusion could increase the number of embryos with a normal chromation structure, which results in increased in vitro development.

• Proceedings of the KIEE Conference
• /
• 1999.07g
• /
• pp.3279-3281
• /
• 1999

This paper describes a method of direct wafer bonding using surfaces activated by a radio-frequency hydrogen plasma. The hydrogen plasma cleaning of silicon in the RIE mode was investigated as a pretreatment for silicon direct bonding. The cleaned silicon surface was successfully terminated by hydrogen, The hydrogen-terminated surfaces were rendered hydrophilic, which could be wetted by Dl water rinse. Two wafers of silicon and silicon dioxide were contacted to each other at room temperature and postannealed at $300{\sim}1100^{\circ}C$ in an $N_2$ atmosphere for 2 h. From the AFM results, it was revealed that the surface became rougher with the increased plasma exposure time and power. The effect of the plasma treatment on the surface chemistry was investigated by the AES analysis. It was shown that the carbon contamination at the surface could be reduced below 5 at %. The interfacial energy measured by the crack propagation method was 122 $mJ/m^2$ and 384 $mJ/m^2$ for RCA cleaning and hydrogen plasm, respectively.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.46 no.5
• /
• pp.395-400
• /
• 2001

We investigated the variations of the flowering response to daylength in Perilla crop (var. frutescens). Seventeen accessions of Perilla crop and one accession of weedy type of var. crispa from China, Korea and Japan were cultivated under three daylength conditions, i.e., short-days, natural daylength and long-days. Most accessions of Perilla crop from China, Korea and Japan were divided into three types, early maturing type, intermediate maturing type and late maturing type by their natural flowering habit. In most of the accessions used, the flowering habit was significantly accelerated by short-day conditions and was delayed by long-day conditions. All the accessions of Perilla crops flowered within 57 days under the 10 hrs light treatment, whereas they did not flower at all even at 170 days after sowing under the 16 hrs light treatment. Thus, this finding suggested that there is a relationship between the types of flowering response to daylength and the geographical distribution which determines the planting season in traditional cultivation practices of Perilla crops. Positive correlation was observed between days to flowering and plant height or internode number in both the short-day and natural daylength conditions. Whereas, correlation was negative between days to flowering and inflorescence length or floret number in natural daylength condition, but it was positive in the short-day condition. Therefore, the daylength condition is considered as the most important environmental factor for flowering habit and morphological characters of Perilla crops. Flowering habit is considered as an important key character for the study of geographical differentiation of Perilla crop in East Asia.

• Archives of Pharmacal Research
• /
• v.28 no.3
• /
• pp.351-357
• /
• 2005

Endosulfan is one of the organochlorine pesticides, which are well-known endocrine disruptors (EDs), and it acts as an estrogen agonist. Estrogen is a group of hormones that play an important role in mammary gland function and are implicated in mammary carcinogenesis. In the present study, we studied the effects of endosulfan on nodule like alveolar lesion (NLAL) formation in mouse mammary gland development using a mouse mammary gland organ culture (MMOC) system. Although endosulfan-treated mammary glands did not form NLALs, more alveolar buds were formed in this group than in the negative control (vehicle-treated) group. In addition, telomerase reverse transcriptase (TERT) mRNA expression levels were increased in endosulfan-treated mammary glands in a dose-dependent manner. Telomerase can be activated by estrogen, therefore, we examined the effects of endosulfan on telomerase activity, and found that the telomerase activity in estrogen receptor-positive MCF-7 cells was up-regulated by endosulfan treatment. Moreover, this activation was accompanied by the up­regulation of the TERT mRNA expression. Also, transient expression assays using CAT reporter plasm ids containing various fragments of the TERT promoter showed that this imperfect palindromic estrogen-responsive element is almost certainly responsible for the transcriptional activation by endosulfan. These results may help elucidate the endocrine disrupting mechanism of endosulfan.

• Archives of Pharmacal Research
• /
• v.26 no.6
• /
• pp.493-498
• /
• 2003

In this study we have investigated the pharmacokinetics and tissue distribution of GX-12, a multiple plasmid DNA vaccine for the treatment of HIV-1 infection. Plasmid DNA was rapidly degraded in blood with a half-life of 1.34 min and was no longer detectable at 90 min after intravenous injection in mice. After intramuscular injection, plasmid DNA concentration in the injection site rapidly declined to less than 1 ％ of the initial concentration by 90 min post-injection. However, sub-picogram levels (per mg tissue) were occasionally detected for several days after injection. The relative proportions of the individual plasm ids of GX-12 remained relatively constant at the injection site until 90 min post-injection. The concentration of plasmid DNA in tissues other than the injection site peaked at 90 min post-injection and decreased to undetectable levels at 8 h post-injection. The rapid in vivo degradation of GX-12 and absence of persistence in non-target tissues suggest that the risk of potential gene-related toxicities by GX-12 administration, such as expression in non-target tissues, insertional mutagenesis and germline transmission, is minimal.