• Journal of the Korean Institute of Landscape Architecture
• /
• v.28 no.5
• /
• pp.48-57
• /
• 2000

This paper is dealing with the fundamental properties of planting concrete, replacing the existing cover concrete on the roof of a building. This study is to find out the physical characteristics of the planting concrete and rearing characteristics of the grass throughout the modeling experimental materials. As the results of the experiment, the physical properties of planting concrete show the following results; when the paste to aggregate ratio is 0.2~ 0.4, voids volume : 30~17%, unit weight: 1,710~2,010kg/m3, compressive strength : 45~145kgf/$\textrm{cm}^2$, its pH is more than 11, but is reduced to the proper degree for planting after being neutralized. Kentucky bluegrass covered with planting concrete is grown well. The planting concrete used with blast furnace slag cement shows a better properties at the height, the width and the covering rate by 1.1cm, 0.5mm and 7%, respectively, than those used with ordinary portland cement. Also, the less the paste to aggregate ratio is, the better the plant grows. The orders of the effects of temperature control are as follows; the system of planting concrete with grass>the system of planting concrete without grass>the system of mixed soil>the existed roof system. In case, the planting concrete is placed to the roofs of buildings instead of normal concrete slab, and a number of favorable effect can be expected such as the improvement os environmental factors, the reduction of construction cost, the saving of energy and the reduction of environment load. The future research on the change of a variety of the aggregate conditions and the application of the practical structures should be made, and also the research of the endurance also be performed.

• Journal of Biosystems Engineering
• /
• v.22 no.4
• /
• pp.401-410
• /
• 1997

Scattering of seeds is one of the problems in the hill- dropping planters with a roller-type metering device. For crops like rice, corns and beans, the hill-dropping is own better for a high yield than the drill planting. The roller type metering device has been used for the drill planters and has many advantages. However, it has a problem of scattering of seeds when they are placed on rows. In this study a method was developed to design the roller type metering device fir the precision hill-droppings. Design parameters were derived to configure completely the geometries of the roller and brush. The method was applied to the design of the metering device of the rice seeding machines. The field test showed that the metering device designed by the method made a better performance of seed placement than that made by the precvious one. The method also can be applied to the design of metering devices for the precise hill-droppings of other crops.

• Proceedings of the Korean Society for Agricultural Machinery Conference
• /
• 1993.10a
• /
• pp.284-290
• /
• 1993

In order to improve the adaptability of rice transplanter to seeding with different length when transplanting multicropping rice in south China. The seedling separating planting mechanism is resynthesized in the paper. According to the agronomy requirements of seedling's transplanting, optimum motional path of the tip point of planting needle is obtained. by applying the established kinematic model of the separating planting mechanism, the relevant software is compiled. On the basis of the features of the problem, the constrained optimization method is utilized to solve the problem with 24 restrictions. Thus, the optimum structure parameters are obtained to satisfy the path points accurately.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.3 no.3
• /
• pp.105-112
• /
• 2000

For the purpose of building up the construction prospects of highway in consideration of natural environment. The tree planting and flower seeding in highway road side using native species were offered to natural landscape and resting area landscaping for peoples, and these area were 194place. The tree planting and flower seeding activity is to improve driving circumstances, and to conserve living and natural environment along the highways. And, preparation of ecotone and biotope at the highway surroundings for natural ecosystem conservation is an important activity, and planting of natural plants is generally carried out near wildlife ecoroads in order to give the way for animals. The primary purpose of this tree planting and seeding is not only to reduce environmental pollution, but also to enhance the ecological surroundings of highway circumference. Ultimately, It is essential that the constructive method of highway think over such as ecological environment and road design, surveying and management, construction, highway maintenance etc.

• Journal of the Korean Institute of Traditional Landscape Architecture
• /
• v.32 no.2
• /
• pp.124-133
• /
• 2014

The study on Musa basjoo planting in traditional gardens in of folk villages and traditional temples was conducted to identify the phenomenon of Musa basjoo planting which frequently appears in paintings and literatures of the late Joseon dynasty and how the cultural custom is being handed down. The result of the study is as follows. As a result of studying state-designated folk villages 6 sites, the custom is being handed down in a few limited gardens including Asan Oeam Village and Seongju Hangae Village. In case of Oeam Village, there are three gardens where Musa basjoo was planted including Seolimbang, Vice Minister's Residence, and Geonjae House where Musa basjoo withered now. In case of Hangae Village, it was found in Bukbi House, Hahoe Residence and Gyoridaek Jinsa's Residence and most of them were planted in front of guesthouses and main building with the assemble-planting method. Musa basjoo planting was confirmed in 39 traditional temples and it was found that Yangsan Tongdosa Temple and attached hermitage Geukrakam are currently prevalent in Musa basjoo planting. Musa basjoo was planted on either side of the stairs of Buddhist sanctums for Buddha and Avalokitesvara Guan Yin of main temples and gwaneum temples with the assemble-planting method and it has a tendency of pair planting. Considering that Musa basjoo is a southern plant, most of Musa basjoo planting was distributed around Jeollanam-do and Gyeongsangnam-do, which is closely related to the isotherm distribution of the Korean Peninsula. Especially, it was found that planting flora was centered on $12^{\circ}C$ of Warmth Index $100^{\circ}$ and annual average temperature.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.6 no.3
• /
• pp.56-68
• /
• 2003

The main purpose of this study was to verify the shore margin protection effect of the root system of Salix gracilistyla Miq. developed from direct sticking cuttings on wetland, through the measurement of root growth and comparison of soil slaking rate depending on the planting method applied to shore-marginal slope. Comparison of growth rate and soil dispersion rate was made between five planted slope and one naked slope. The planting methods applied to the planted slope were (a) horizontally layed burying of stick(45cm) bundle (b) horizontally layed covering the slope with sticks (c) horizontally fencing with normal cuttings(20cm) (d) elected sticking of normal cutting at equal distances (e) random scattering short cuttings(3-4cm). As results, the most effective planting method was horizontally layed burying, and in order to increase its efficiency scattering the live stem chips in 2-3cm on the slope is recommended. The growth of root was negatively regressive to the distance from water floor.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.7 no.3
• /
• pp.35-47
• /
• 2004

In order to study changes in vegetation pursuant to rooftop revegetation plantation methods, plantation methods for rooftop revegetation were divided into two types through an analysis of recent trends. Then, Planted plants and invasive plants on sites where the planting methods were introduced were monitored. Planting methods were divided into mono-layer meadow cover type and multi-layer planting cover type. They showed some differences in terms of the availability of wetland, the structure of vegetation layers, the planted species, and the material of mulching. According to the results of monitoring the two sample sites for different plantation methods, the number of invasive plants was higher in multi-layer planting cover type and the ratio of naturalized plants was higher by 30% in average in mono-layer meadow cover type. The main reason for such a result is that the natural soil used in the multi-layer planting cover type likely contained some seeds. Moreover, it's harder for invasive plant seeds to germinate in volcanic rocks than in natural soil. Also, it is attributable to wetlands available in multi-layer planting cover type and diverse living environments created by multi-layer planting. The reason of the ratio of naturalized plants being higher by at least 10% in mono-layer meadow cover type is the character of naturalized plants being stronger in unfavorable conditions than nature plants are. Accordingly, the germination rate in the volcanic rock mulching has likely contributed in raising the introduction and germination of naturalized plants. The results showed that multi-layer planting cover type using wetland creation and nature soil can increase the number of invasive plants and lower the ratio of naturalized plants. However, since seeds contained in the natural soil can affect the growth of planted plants, this needs to be clarified, It was judged that mono-layer meadow cover type may affect more greatly on the germination and growth of invasive plants than on those of planted plants, Its potential adoption in highly urbanized areas was examined. By complementing with the mutual benefits of each plantation method, it appeared possible to shift to a rooftop revegetation system suitable to the site.

• Korean Journal of Environment and Ecology
• /
• v.15 no.3
• /
• pp.207-212
• /
• 2001

To seek for restoration method of Abies koreana forest with planting seedlings, Abies koreana seedlings(2, 3 and 5 year old) were planted by date(spring and summer) and surface treatment (coir-mat, coir-net and control) at Janggumok area in Hallasan. Survival rate and shoot growth of the seedlings were measured and compared by planting date, seedling age and surface treatments. For summer planting, survival rates of the seedlings are increased with increasing seedling ages, and those are not differed between surface treatments. For spring planting, survival rates of the seedlings are increased with decreasing seedling ages, and those are not differed between surface treatments. For summer planting, shoot growth of the seedlings are significantly differed between surface treatments. Shoot growth of the seedlings was the highest value 2.11mm at coir-matted plot, and the lowest value 1.49mm at control B)lot. Shoot growth of the seedlings are not differed between the seedling ages, but the highest shoot growth was 2.26mm at coir-matted and 3-year old plot. For spring planting, survival rates and shoot growth of the seedlings are not differed between seedling ages and surface treatments.

• Journal of Korean Society of Forest Science
• /
• v.106 no.4
• /
• pp.465-472
• /
• 2017

In this study, containerized seedlings of Pinus densiflora (2-0) were planted in Iso-ri, Hwadong-myeon, Sangju-si, Gyeongbuk on April, 2015. It was planted by lightweight planting auger that Kyungpook University has developed and mattock which is the general planting method of containerized seedlings. With the square planting method ($1.8{\times}1.8m$), 225 trees were planted respectively and about 2 years of initial growth, survival rate and seedling quality index (SQI) were analyzed and investigated. According to the analysis result, the average root collar diameter (mm) of planted containerized seedlings that used lightweight planting auger and mattock reached 3.77 and 3.94 in 2015, 18.73 and 15.32 in 2016, and 27.8 and 23.9 in 2017 respectively. In addition, the average height of containerized seedlings rated 33.4 and 33.4 in 2015, 89.8 and 74.7 in 2016 and 120.7 and 97.9 in 2017. It turns out that the height of initial growth of containerized seedlings that are planted by lightweight planting auger were much higher than mattock. The survival rate of the containerized seedlings that used lightweight planting auger was also higher by 10% than that used mattock. Also, H/D rate (healthiness) and T/R rate were almost the same, however, for the SQI, 0.60 was for lightweight planting auger and 0.24 for mattock. It seems like the lightweight planting auger is more advantageous than mattock in initial growth.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.42 no.3
• /
• pp.323-332
• /
• 1997

Drainage is needed to run off excessive water stress during the rainy season for soybean cultivation in the converted upland from paddy field. This study was conducted to evaluate the effect of planting dates and drainage methods on growth and yield of sprout soybeans in the converted upland from paddy field. The stem and root growth at flowering stage showed no difference by drainage method but plant height, number of nodes and branches, and fresh weight of stem and root were much greater as planting date delayed. Seed yield was correlated positively with fresh weight of stem and root, and T/R ratio at the flowering stage, respectively. Lodging degree was not different by drainage method but was higher in planting at June 16 than May 15. Number of pods and 100 seed weight were not different by drainage method and 100 seed weight was heavy in Eunhakong, light in Kwangankong as planting date delayed. Higher seed yield was observed in surface drainage than open ditched drainage. Yield performance of Eunhakong was good in late planting, while that of Kwangankong was in early planting.