• 한국작물학회지
• /
• 제26권3호
• /
• pp.263-268
• /
• 1981

현재 우리나라 전 지역에서 재배되고 있는 참깨 1401종을 수집하여 이들 수집종들에 대한 주요형질의 지역간 및 품종간 차이를 조사 검토한 바 다음과 같은 결과를 얻었다. 1. 종수색에 있어서는 시장성이 높은 백색종이 79%를 차지하였고 갈색종이 21%정도이었다. 2. 삭의 착과성과 실방수는 1과성 2실4방 종이 75%, 1과종 4실8방종 20%, 3과성 2실4방종 5%이었고, 충남 수집종 중에서 1과성 3실6방의 희귀종 2종이 발견되었다. 3. 파종 후 출현기에서 관화기까지의 일수는 중북부지역 수집종이 길고, 남부지역품종들이 짧은 편이였다. 4. 주당삭수는 개화일수가 긴 중북부지대종이 많고, 남부지대종들이 적었다. 5. 분지수는 1과성 2실4과종들이 다분지종이고, 3과성 2실4과종이나, 1과성 4실8과종들이 적은 경향이었다. 6. 과성에 따른 주부삭수와 종실중간의 상관관계는 1과성 2실4과종이나 1과성 4실8과종에서는 유의성이 인정되었으나 3과성 2실4과은 유의성이 인정되지 않았다. 7. 주당삭수와 종실중 및 분지수, 종실중과 분교수간에 정의 상관관계가 인정되었다.

• 한국작물학회:학술대회논문집
• /
• 한국작물학회 2017년도 9th Asian Crop Science Association conference
• /
• pp.172-172
• /
• 2017

Pollen germination and its' viability in bellflower hybrid system are of great importance. The present study was conducted to investigate the several factors underlying the pollen germination of Platycodon grandiflorum and obtain the basic data for effective artificial pollination for the production of sound specifies. The pollens of Platycodon grandiflorum started germination from one hour after planting, and the germination was actively progressed as time dependent manner. For lighting conditions, the germination of pollens under the light was faster by more than twice than that without the light. Furthermore, the germination was better in the high temperature rather than in the low temperature. The germination rate was higher in the $30^{\circ}C$. For the carbon source, the germination rate was better at the concentration of 15% regardless of the kinds. In particular, the highest value was observed with glucose. The germination rate was decreased substantially as the increasing with the higher pH. The dynamic germination of pollens was observed at the pH 5. With respect to the growth regulator, the higher concentration of NAA induced the higher the germination rate. $GA_3$ showed a good germination rate in $0.05mg{\cdot}L^{-1}$. Meanwhile, for kinetin, lower concentration increased the germination rate, unlike NAA. The higher concentrations of boric acid degraded the germination rate, and the addition of boric acid of $10mg{\cdot}L^{-1}$ demonstrated higher germination rate than the addition of other growth regulators. Notably, the addition of asparaginic acid exhibited the similar results in all test sectors regardless of concentration, whereas a little higher result was observed in the high concentration sector. Taken together, the results concluded that the boric acid was considered as one of the essential minerals that played an important role on the germination of pollens.

• Journal of the Korean Wood Science and Technology
• /
• 제38권3호
• /
• pp.165-169
• /
• 2010

도시 내 부족한 녹지공간을 확보하기 위하여, 기존 건물의 옥상 등 인공지반에서의 녹화가 점차 확대되어 가고 있으나 인공지반 대부분을 차지하고 있는 옥상의 경우 건물에 미치는 하중과 강우 및 관수에 관한 문제를 비롯하여 식물의 성장도 원활해야 한다는 점을 주의해야 한다. 현재 많이 사용되는 인공토양의 경우 원석을 수입하여 가공 생산하는 것으로, 앞으로 인공지반 녹화가 활성화될시 수입으로 인한 비용 등의 문제로 새로운 대체물질이 필요하다고 판단된다. 본 연구에서는 기존 녹화소재의 단점인 하중과 설치 후 유지 관리를 보완하고자 친환경 대체재료로서 폐목재칩과 폐지 슬러리를 이용한 식생기반재를 개발하고 그 제조조건에 대해 검토해보았다. 본 실험은 폐목재칩과 폐지슬러리의 혼합비와 비료의 주입농도를 달리하여 식생기반재를 제조하고 잔디와 보리를 식생기반재당 1 g씩 파종하여 성장률을 분석하는 것으로 진행되었다. 폐목재칩과 폐지 슬러리는 0.9 : 0.1~0.5 : 0.5의 비율로 혼합되었으며, 그 결과 혼합비율이 0.6 : 0.4 일 때 잔디는 약 1.5배, 보리는 약 1.9배 높은 성장률을 보였다. 또한 비료의 농도가 1%일 때 제조된 식생기반재에서 비료가 첨가되지 않았을 때보다 약 1.3~1.5배 높은 성장률을 보였다. 식생기반재의 pH는 7.1~8.8로 약알칼리성을 보였으며 주입된 비료의 농도가 높을수록, 폐목재칩의 혼합량이 많을수록 낮은 경향을 나타냈다. 그리고 비료 용찰실험 결과 비료를 첨가하지 않은 칩과 비교시 비료를 첨가한 칩에서 인, 칼륨, 몰디브덴의 성분이 높게 나온 것으로 보아 비료의 주입은 성공적임을 알 수 있었다

• 생물환경조절학회지
• /
• 제29권4호
• /
• pp.456-463
• /
• 2020

수경재배 시설 내에서 토마토를 재배할 때 대목사용에 따른 수확 시기별 수확량 변화와 생육지표를 활용한 생육차이를 살펴보고자 본 실험을 수행하였다. '감마'를 접수로 '파워가드', 'T1', 'L1', 'B.blocking'을 대목으로 접목한 토마토 접목묘 4종류와 접목하지 않은 '감마'를 실생묘로 실험에 사용하였다. 재배는 장기재배를 하는 토마토 수경재배 비닐하우스에서 재배되었다. 토마토의 총 수확량을 조사한 결과 대목을 사용하여 접목한 토마토 '파워가드'의 수확량과 접목하지 않은 토마토의 수확량은 각각 8,428g과 7,645g으로 나타났다. 생육 후기 접목한 토마토 'B.blocking'과 실생 토마토의 개화위치는 각각 17.58cm와 14.92cm였다. 이같은 결과는 토마토에 있어서 대목을 사용하는 것이 수확량이 높고 수확 후기까지 식물체가 균형있는 생장을 하는 것으로 볼 수 있다. 접목묘와 실생묘의 수확량 차이는 정식 236일 째인 19화방부터 크게 나타나기 시작하였다. 토마토 장기재배를 할 경우에는 대목을 사용하는 것이 높은 수량을 얻을 수 있는 것으로 판단된다.

• Journal of Biosystems Engineering
• /
• 제42권2호
• /
• pp.104-111
• /
• 2017

Purpose: We have studied the necessary qualities of seedlings of some leafy vegetables for a riding-type two-row automatic transplanter. When seedlings are planted using a transplanter, long roots may be rounded in the bottom of the tray, and this can interfere with the separation of the seedlings. Uprightness related to leaf spread angle is an important quality for seedlings in mechanical planting. Methods: To select cultivars suitable for the transplanter, we compared varieties of Kimchi cabbage (Chukwang, Daetong, Whipalam and Namdo), head lettuce (Abi and Sensation), cabbage (YR Onnuri, YR Hogel, Harutama, and Ogane), and broccoli (Nicegreen and Earlyyou). To compare the effect of bed soil on root formation and growth, we used five types of soil: Chologi, Burger, Wonjomix, Bio, and Baroker with 2.6-3 L per tray. Growth increment and the degree of root formation were measured according to the RDA guidelines 25 days after sowing for Kimchi cabbage and head lettuce and 44 days after sowing for cabbage and broccoli. Conclusions: According to the plug tray, the optimum seedling age in both 128- and 200-hole trays was 28 days for Kimchi cabbage and 44 days for cabbage and broccoli. Head lettuce took 35 days in 128-hole trays and 31 days in 200-hole trays. Burger soil was most effective for root formation and growth of the four kinds of leafy vegetables; it appeared that smaller soil volume led to faster root formation.

• 한국농림기상학회지
• /
• 제2권2호
• /
• pp.41-46
• /
• 2000

본 시험은 다산벼를 공시하여 작물시험장 수도재배 포장에서 1998~1999년에 단위면적당 수수화보를 위하여 5월10일부터 10일 간격으로 6월 19일까지 5회 이앙을 하여 생육환경 변화에 따른 경수증가와 재식본수를 1, 3, 5본 및 7본으로 하였을 때 출수기의 변화를 구명하고 재배 기술 개발의 기초자료로 활용하고자 시험하여 몇 가지 결과를 얻었기에 보고하고자한다. 1. 다산벼는 초기 생육기온이 높을수록 분얼에 유리하여 이앙 후 30일 경수가 5월 10일 이앙 9.7개 보다 6월 19일 이앙이 18.3개로 8.6개가 많았다. 2. 재식묘수에 따른 경수는 7묘까지 많을수록 많았으며, 수수는 분얼 경수가 많을수록 많은 경향이었다. 3. 출수기는 이앙기가 늦어질수록 6월 9일 까지는 출수일수가 단축되었으나 6월 19일 이앙은 늦어졌다. 주당묘수에 따른 변화는 y = 2.65$x^2$-31.36x+1957.5 ($R^2$=0.9795)관계로 변화하였다. 4. 경당 건물중은 평균기온의 변화에 따라 y = -0.1285$x^2$+6.6717x-83.423($R^2$=0.9223$^{**}$ ) 관계가 있고, 경당 건물중이 가장 높은 최적 기온은 26$^{\circ}C$이었다. 5. 수수와 수량과의 관계는 수수가 증가하면 수량은 증가하였고, 그 관계는 y=1.6292x+11.701($R^2$=0.6342$^{**}$ )이었다.

• 한국산림과학회지
• /
• 제104권1호
• /
• pp.90-97
• /
• 2015

본 연구는 주요 활엽수 조림수종인 느티나무, 참느릅나무, 거제수나무 및 피나무를 대상으로 세 가지 시비 처리($0.5g{\cdot}L^{-1}$, $1.0g{\cdot}L^{-1}$, $2.0g{\cdot}L^{-1}$)에 따른 근원경, 간장, 물질생산량, 묘목품질지수 등 생장 특성을 조사 분석하여 시설양묘과정에서 실질적으로 적용 가능한 수종별 적정 시비기술을 구명하고자 수행하였다. 느티나무는 $2.0g{\cdot}L^{-1}$, 거제수나무는 $0.5g{\cdot}L^{-1}$ 시비처리구에서 가장 우수한 생장 및 묘목품질을 나타냈는데, 시비수준에 따른 두 수종간의 생장 특성이 반대의 경향을 보인 것이다. 또한, 시비처리에 따른 참느릅나무와 피나무의 근원경과 간장 생장은 유의적 차이가 없었다. 그러나 묘목품질지수는 두 수종 모두 $0.5g{\cdot}L^{-1}$ 시비처리구에서 가장 낮았으며, $1.0g{\cdot}L^{-1}$과 $2.0g{\cdot}L^{-1}$ 시비처리구 간 유의적 차이는 없었다. 따라서 묘목 품질과 함께 경제적, 환경적 측면을 고려했을 때 느티나무는 최소 $2.0g{\cdot}L^{-1}$, 참느릅나무와 피나무는 $1.0g{\cdot}L^{-1}$, 거제수나무는 최대 $0.5g{\cdot}L^{-1}$이 적정 시비 수준으로 판단된다. 수종별 적정 시비 수준(배액, 회수)의 적용으로 우량 묘목 생산 및 이와 연계된 조림성과 향상뿐만 아니라 환경오염 저감, 생산비용 절감 및 양묘 기간 단축 등 경제적 이점이 기대된다.

• 한국조경학회지
• /
• 제27권5호
• /
• pp.1-11
• /
• 2000

The aim of this study is to suggest guidelines of bicycle lanes in terms of landscape architecture with special reference to Kyongju. The research is mainly based on landscape satisfaction factors analysis regarding 16 variables and 10 slide photos of bicycles lanes. The 43 students of Landscape Department in Kyungpook National University were selected for the research. The major research findings are as follows; 1. Satisfaction degree of 16 variables are assessed in terms of semantic differential scale. The assess group is generally satisfied with variables concerning bicycle lane environment such as $\ulcorner$inclination of the lane (5.2)$\lrcorner$and $\ulcorner$road pavement conditions (5.1)$\lrcorner$. But the group expresses rather low satisfaction degree on the variables related lanes' surrounding landscape such as $\ulcorner$visual variety (3.9)$\lrcorner$, spacious resting place (3.7)$\lrcorner$ and $\ulcorner$variety of facilities (3.1)$\lrcorner$. 2. The level of satisfaction degree regarding 16 variables and 10 photos shows that the male gives relatively higher satisfaction degree than the female group. But there is no statistical significance between the group regarding satisfaction degree of each variable and photo except 4 variables and 2 photos. 3. The assess group gives the highest satisfaction degree on the$\ulcorner$no. 10 slide (6.5)$\lrcorner$ and the lowest on the $\ulcorner$no. 7 slide (2.7)$\lrcorner$. The two photo shows variables of more than 4 points difference of satisfaction degree, such as $\ulcorner$good looking planting threes (4.8)$\lrcorner$, $\ulcorner$enough shadows (4.8)$\lrcorner$ and $\ulcorner$comfortable atmosphere(4.1)$\lrcorner$. 4. $\ulcorner$Aesthetic and amenity factor$\lrcorner$, $\ulcorner$use condition factors$\lrcorner$, $\ulcorner$ike lane environment factors$\lrcorner$, and $\ulcorner$inclination and open view factors$\lrcorner$are the main four factors influencing landscape satisfaction of bicycle lane. Regression model using factor scores for landscape satisfaction degree of bike lane is S(Satisfaction degree)=4.526+1.099(aesthetic and amenity factor)+0.720(use condition factors)+0.486(bike lane environment factors)+0.048(inclination and open view factors($R^2$=0.811).

• Journal of Ecology and Environment
• /
• 제41권10호
• /
• pp.290-301
• /
• 2017

Background: Forest edges create distinctive ecological space as adjacent constituents, which distinguish between different ecosystems or land use types. These edges are made by anthropogenic or natural disturbance and affects both abiotic and biotic factors gradually. This study was carried out to assess edge effects on disturbed landscape at the pine-dominated clear-cut area in a genetic resources reserve in Uljin-gun, eastern Korea. This study aims to estimate the distance of edge influence by analyzing changes of abiotic and biotic factors along the distance from forest edge. Further, we recommend forest management strategy for sustaining healthy forest landscapes by reducing effects of deforestation. Results: Distance of edge effect based on the abiotic factors varied from 8.2 to 33.0 m. The distances were the longest in $Mg^{2+}$ content and total nitrogen, $K^+$, $Ca^{2+}$ contents, canopy openness, light intensity, air humidity, $Na^+$ content, and soil temperature followed. The result based on biotic factors varied from 6.8 to 29.5 m, coverage of tree species in the herb layer showed the longest distance and coverage of shrub plant in the herb layer, evenness, species diversity, total coverage of herb layer, and species richness followed. As the result of calculation of edge effect by synthesizing 26 factors measured in this study, the effect was shown from 11.0 m of the forest interior to 22.4 m of the open space. In the result of stand ordination, Rhododendron mucronulatum, R. schlippenbachii, and Fraxinus sieboldiana dominated arrangement of forest interior sites and Quercus mongolica, Vitis amurensis, and Rubus crataegifolius dominated spatial distribution of the open area plots. Conclusions: Forest interior habitat lies within the influence of both abiotic and biotic edge effects. Therefore, we need a forest management strategy to sustain the stability of the plant and further animal communities that depend on its stable conditions. For protecting forest interior, we recommend selective logging as a harvesting method for minimizing edge effects by anthropogenic disturbance. In fact, it was known that selective logging contributes to control light availability and wind regime, which are key factors affecting microclimate. In addition, ecological restoration applying protective planting for the remaining forest in the clear-cut area could contribute to prevent continuous disturbance in forest interior.

• 한국환경보건학회지
• /
• 제3권1호
• /
• pp.27-44
• /
• 1976

This study was carried out to evaluate the harmful factors in working environments and to investigate the labor productivity after improvement of environments, surveying 93 industrial establishments of 10 industries located in Youngdeungpo industrial area in Seoul. The results obtained were as follows: 1) The highest noise level of 125dB(A) was indicated at the rolling process of transport equipment manufacturing industry. 2) The best illumination level was shown in precise machinery industry and the worst was indicated in rubber products, metallic products and transport equipment manufacturing industries. 3) Thermal conditions were above threshold limit value (TLV) at more than two processes of all industries except printing industry. 4) The highest dust concentration was determined in textile and wearing manufacturing industry. 5) Organic solvents were detected at 52 processes in 93 industrial establishments and 33 processes of them showed higher than TLV. The results about harmful chemicals were as follows: a) sulfur dioxide ($SO_2$)was determined higher than TLV on welding process of metallic product manufacturing industry and heat treatment process of transport equipment manufacturing industry. b) Carbon monoxide (CO) concentration was 700ppm at heat treatment process of transport equipment manufacturing industry, indicating 14 times of TLV. c) vinylchloride concentration in the air of PVC raw material mixing process and PVC preparation process of chemical product manufacturing industry was determined higher than TLV. d) Hydrochloride (HCl) concentration in the air of wire expanding process of transport equipment manufacturing industry was determined higher than TLV. 7) Higher values of lead concentration than TLV were determined at lead welding metallic product manufacturing industry and type planting process of process of printing industry, $1.8mg/m^3$ and $0.3mg/m^3$ respectively. 9) 22, 968 of 52, 855 workers (i.e. 43.5%) in 93 industries were exposed to various harmful agents. 10) It was found that the improvement of illumination in electric apparatus manufacturing industry (from 20~40 lux to 420 lux) resulted in an increase in productivity of 6.5% per capita and a decrease in faulty products of 19%. 11) Improvement of environments using local exhaust ventilation system resulted in a decrease of harmful substances lower than TLV and an increase in productivity of 11.4%. 12) Improvement of shovelling tools based on ergonomics resulted in a reduction in energy expenditure of 25.3% and an increase in productivity of 32.2% per capita.