• Korean Journal of Construction Engineering and Management
• /
• v.8 no.1 s.35
• /
• pp.57-65
• /
• 2007

Rebar work is a labor intensive operation, and with labor shortage and high-wage era, the cost is rising, so re-bar manufacturing system in plant is adapted. However there remains a lot of problems. Although manufacturing system in plant, which greatly effects the building's safety, endurance, and construction time, is an important phase in construction, it holds serious problem of quality and productivity deterioration due to its characteristic of intensive-labor and maintaining of old work methods resulting in poor management, and costs increase. Therefor in this study to investigate current situation and problems of rebar work in plant and to find methods of betterment, a survey was conducted to factory engineers in 18 companies.

• The Plant Pathology Journal
• /
• v.33 no.1
• /
• pp.34-42
• /
• 2017

Grapevine rupestris stem pitting-associated virus (GRSPaV) is a worldwide-distributed pathogen in grapevines with a high genetic variability. Our study revealed differences in the complexity of GRSPaV population in a single host. A single-variant GRSPaV infection was detected from the SK30 grapevine plant. On the contrary, SK704 grapevine was infected by three different GRSPaV variants. Variant-specific RT-PCR detection protocols have been developed in this work to study distribution of the three different variants in the same plant during the season. This study showed their randomized distribution in the infected SK704 grapevine plant. Comparative analysis of full-length genome sequences of four Slovak GRSPaV isolates determined in this work and 14 database sequences showed that population of the virus cluster into four major phylogenetic lineages. Moreover, our analyses suggest that genetic recombination along with point mutations could play a significant role in shaping evolutionary history of GRSPaV and contributed to its extant genetic diversification.

• Nuclear Engineering and Technology
• /
• v.50 no.6
• /
• pp.860-868
• /
• 2018

This article presents a new design of earthquake instrumentation that is suitable for quick decision-making after the seismic event at the nuclear power plant (NPP). The main objective of this work is to ensure more availability of the NPP by expediting walk-down period when the seismic wave is incident. In general, the decision-making to restart the NPP after the seismic event requires more than 1 month if an earthquake exceeds operating basis earthquake level. It affects to the plant availability significantly. Unnecessary shutdown can be skipped through quick assessments of operating basis earthquake, safe shutdown earthquake events, and damage status to structure, system, and components. Multidecision parameters such as cumulative absolute velocity, peak ground acceleration, Modified Mercalli Intensity Scale, floor response spectrum, and cumulative fatigue are discussed. The implementation scope on the field-programmable gate array platform of this work is limited to cumulative absolute velocity, peak ground acceleration, and Modified Mercalli Intensity. It can ensure better availability of the plant through integrated decision-making process by automatic assessment of NPP structure, system, and components.

• Proceedings of the Safety Management and Science Conference
• /
• 2005.11a
• /
• pp.505-510
• /
• 2005

The manufacturing industries which played a major role in the rapid economic growth and industrialization of Korea in the late 20th century had considerable difficulties changing their manufacturing conditions from producer-oriented conditions to customer-oriented ones according to market changes. In this study, increase plant efficiency because grafts together modular system to plant layout and analyzes Work In Process(WIP) between product's cycle time and each process, family efficient plan wishes to choose opposite bank. Simulation approach used for presented methodology The effect will not gain the results for other reasons the inherent conditions of companies, people, and culture which have been hitherto described, but will be expected to help the direction for a new Lay-out production system to reflect on the native conditions rather than fixed technological means and methods in way of an analysis of fundamental problems which small and medium companies in Korea face.

• Korean Journal of Plant Resources
• /
• v.6 no.1
• /
• pp.53-75
• /
• 1993

This paper deals with Hyang-Yak Chip Seong Bang, which was made by Hyo-Tong Yu, Jung-Rye Noh and Yun-Duk Park by the order of King Sechong in 1431 and published in eighty-five volumes in 1433. This work includes on hundred three families and two hundred eighty-one species plants, and makes a comprehensive survey of past studies on some medical books. To publish this work, some specialists such as Jung-Rye Noh were sent to China and they made an exchange of opinions with some specialists of China to correct some facts. Cullen soryliforia and Trigonella foenumgraecum of Laguminosae were described as a subtropical plant or tropical plant which had not been produced in our country Also, it includes several anti-cancer plants such as Panax schinseng and Rubia akane that are very helpful to the treatment of diseases of adult people.

• Proceedings of the Safety Management and Science Conference
• /
• 2009.11a
• /
• pp.209-221
• /
• 2009

In the steel industry, steel is manufactured and processed to produce a variety of steel products. The industry provides fundamental materials to the whole range of industries including car, ship, electric appliance and construction industries, so that it is very important as an infrastructure industry. The steel manufacture process involves aerial work, many danger factors caused by the treatment with hazardous gases including BFG and COG and by high pressure gases including H2, O2, N2 and LPG. It requires the management over the large area because many workers work in a plant. The potential dangers in the steel plant were identified and the effect of the danger assessment was verified through the analysis of the danger assessment for the steel plant. The allowed degree of danger was lowered after the improvement through the danger assessment in the plant where the case studies were conducted, which indicates that the danger assessment is highly effective.

• Nuclear Engineering and Technology
• /
• v.25 no.3
• /
• pp.394-402
• /
• 1993

A novel framework for quantitative estimates of the benefits of signals on nuclear power plant availability and economics has been developed in this work. The models developed in this work quantify how the perfect signals affect the human operator's success in restoring the power plant to the desired state when it enters undesirable transients. Also, the models quantify the economic benefits of these perfect signals. The models have been applied to the condensate feedwater system of the nuclear power plant for demonstration.

• Proceedings of the Korean Nuclear Society Conference
• /
• 1995.10a
• /
• pp.191-196
• /
• 1995

The intelligent human-machine interface (HMI) has been developed to enhance the safety and availability of a nuclear power plant by improving operational reliability The key elements of the HMI are the large display panels which present synopsis of the plant status and the compact, digital work stations for the primary operator control and monitoring functions. The work station consists of four consoles such as a dynamic alarm console (DAC), a system information console (SIC), a computerized operating-procedure console (COC), and a safety related information console (SRIC). The DAC provides clean alarm pictures, in which information overlapping is excluded and alarm impacts are discriminated, for quick situation awareness. The SIC covers a normal operation by offering all necessary plant information and control functions. In addition, it is closely linked with the DAC and the COC to automatically display related system information under the request of these consoles. The COC aids the operator with proper emergency operation guidelines so as to shutdown the plant safely, and it also reduces his physical/mental burden by automating the operating procedures. The SRIC continuously displays safety related information to allow the operator to assess the plant status focusing on plant safety. The proposed HMI has been validated and demonstrated with on-line data obtained from the full-scope simulator for Yonggwang Units 1,2.

• Korean Journal of Construction Engineering and Management
• /
• v.19 no.5
• /
• pp.81-89
• /
• 2018

The purpose of this study is to assess the risk and predict the contingency for modular plant construction projects. Considering the work characteristics of the modular plant, The adapted research method is that suggest models for assessment impact of risk and predict the contingency considering risk. Based on the proposed models, It is selected one modular plant construction project and assessment impact of risk factors and predicted the contingency. The results of this study are as follows: Assessment the probability of occurrence of risk factors and intensity of impact, and extract 15 important risk factors. These are classified as Engineering, Procurement, Fabrication, Transportation, Construction phases to consider the work characteristics of the modular plant. The predicted contingency is that 6.739%(Engineering 2.850%, Procurement 6.225%, Fabrication 6.211%, Transportation 4.165%, Construction 8.168%) to prepare the basic business expense. The model is used as a way to derive quantitative results in the decision-making process for risk management in construction projects.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.16 no.2
• /
• pp.183-192
• /
• 2006

Predicting energy expenditure (EE) is important to prevent work-related musculoskeletal disorders (WMSDs). The problem to predict EE is that the standard of EE is based on western data. The authors checked average EE by job categories to provide basic data for suggesting proper work intensity for Korean workers. This study was conducted from 2003 to 2005. Study subjects were recruited from 4 car parts assembly plant, 2 car assembly plant, 2 Heavy machine manufacturing plant and 2 shipyards. Total study subjects were 515 male workers. To estimate VO2max, sub-maximal test was conducted to measure VO275%max by bicycle ergometer (Combi Co, Aerobike 75XL II). Heartbeats were recorded with heartbeat recorder (Polar Electro Co, Finland, S810) during work. EE of work was calculated by recorded heartbeat and individual regression equation which was derived from sub-maximal test. Subjects were classified into 4 industry and 8 work posture, 23 job task categories. Mean EEs (S.D.) according to industry classification (kcal/min) were 4.9 (0.7), 4.8 (0.7), 4.9 (0.7), 5.0 (0.9), and 4.0 (0.5) for Car Part manufacture, Car Assembly, Ship Building, Heavy Machinery Manufacture, and Hospital Office, respectively. The results suggest that Korean male workers of exceeding to the NIOSH criteria will be needed to plan for job rescheduling to maintain $worker^{\circ}$Øs health. Further study to establish Korean work intensity standard would be needed.