• Research in Plant Disease
• /
• v.16 no.1
• /
• pp.48-58
• /
• 2010

In Korea, EBI fungicides which are highly effective for control of pear scab and rust but of high risk for development of resistance have been frequently sprayed by majority of pear growers. To detect any possible resistance or reduced sensitivity in the field strains of scab fungus to five EBIs, difenoconazole, fluquinconazole, flusilazole, fenarimole and hexaconazole, sensitivity tests were conducted with fungal specimens collected in Ulsan and Naju where scab usually occurs and EBIs have been intensively sprayed for many years. As the strains for which $EC_{50}$ values of the EBIs were largely shifted from those of base-line were occasionally found, the resistant or less sensitive strains were supposed to be distributed. In the activity test for the EBIs by artificial inoculation, in which EBI-treated pear leaves on the potted seedlings were inoculated with fungal spores collected in the two regions, development of resistances to EBIs were confirmed. Since the fungal spores collected at 4 and 2 orchards in Naju and Ulsan, respectively, produced much higher disease incidence on the leaves treated with hexaconazole than those on the untreated control, those fungal specimens were determined as resistant to hexaconazole. Similar results were also obtained with two specimens from Ulsan for flusilazole.

• Korean Journal of Plant Taxonomy
• /
• v.51 no.3
• /
• pp.205-249
• /
• 2021

This study was carried out to survey the flora of Hongdo Island in Sinan-gun, Jeollanam-do, South Korea. Specimens collected from previous Hongdo flora studies were reexamined using a relevant biodiversity database, and field surveys were carried out 22 times from April of 2003 to October of 2020. Based on the specimens collected during both previous studies and this study, the identified vascular plants of Hongdo consisted of 472 taxa comprising 102 families, 296 genera, 425 species, 6 subspecies, and 41 varieties. Among them, 111 taxa are newly recorded in this study, and 6 taxa are described in detail in terms of their morphological characteristics and habitat. Also, 29 taxa were reviewed or re-identified with corresponding taxonomic annotations. In Korea, Hongdo represents the northern distributional limit of the 4 taxa of Goodyera biflora, Damnacanthus major, Calanthe aristulifera, and Hemerocallis hongdoensis. Moreover, Hosta yingeri and Saussurea polylepis are endemic to Hongdo and nearby islands in Korea. Distribution maps of these species were prepared. Protected species designated by the Ministry of Environment were 7 taxa consisting of 2 taxa of level I, specifically Sedirea japonica and Neofinetia falcata, and 5 taxa of level II, which were Cymbidium macrorhizon, Woodwardia japonica, Dendrobium moniliforme, Calanthe aristulifera, and Bulbophyllum inconspicuum. Red list plants as designated by the National Institute of Biological Resources numbered 11 taxa. Naturalized plants numbered 40 taxa.

• Korean Journal of Plant Taxonomy
• /
• v.44 no.3
• /
• pp.208-221
• /
• 2014

The Holocene Hypsithermal Interval(or climatic optimum) was the warmest post-glacial period: temperatures rose to as much as $1-4^{\circ}C$ above present temperatures. We hypothesize that southern plants expanded northward and upward during the Hypsithermal Interval. The Hypsithermal relict populations are defined as populations which distribute mainly in Is. Cheju and Southern subregions and have populations of short-distance dispersion separated by more than 100 km from the nearest distribution. The Hypsithermal relict species were identified and their distributions were mapped based on botanical floras and checklist, herbaria specimens, ecological studies, and field surveys of selected species. Evaluation of the hypothesis was based on reviews of published pollen stratigraphic and paleoecological studies. The results showed that the Holocene Hypsithermal relicts such as Corylopsis coreana Uyeki, Carpinus turczaninowii Hance, Stewartia koreana Nakai ex Rehder were expanded northward during the Holocene Hypsithermal Interval.

• Journal of Veterinary Clinics
• /
• v.29 no.4
• /
• pp.315-318
• /
• 2012

This report describes a case of foot and mouth disease (FMD) in farm-raised Sika deer. FMD serotype A occurred in six cattle farms in January 2010 since the outbreak of pig cases 2002 in South Korea. In addition to the six cattle farms where the disease occurred during January, positive reactions to FMD antibodies were found in two heads of deer on March at a deer farm in serological tests intended to lift the movement restriction of the susceptible animals imposed within risk zone. In the specimens collected from 12 heads for confirmatory tests in the same farm, no virus was detected in antigen tests and neutralising antibody titers in all raising deer in the farm were relatively high. So it seems likely that the animals had been infected with FMD at least one month earlier when they were found.

• Resources Recycling
• /
• v.20 no.1
• /
• pp.54-60
• /
• 2011

The spherical artificial aggregates (AAs) with a diameter of 8 mm, which contains fly ashes discharged from the fluidized bed combustion in a thermal power plant and clay were manufactured by direct sintering method at $1050{\sim}1250^{\circ}C$ for 10 minutes. The effect of fly ash contents on the bloating phenomenon in the AAs was analyzed. The AAs containing fly ash of the amount under 50 wt% showed the black-coring and bloating phenomena. The AAs containing fly ash of the amount over 5Owt%, however, the specific gravity was increased and the color of specimens fully changed to black. These color change phenomena were caused from the formation of FeO by the reduction reaction of almost $Fe_2O_3$ component by the excessive reducing atmosphere formed simultaneously with the rapid emission of the gases generated from the high contents of unburned carbon of with increasing the added fly ash amount. Specific gravity was decreased as fly ash contents increased in the case of sintering at the same temperature condition. Water absorption of all specimens except of the specimens containing 10 wt% fly ashes decreased with increasing sintering temperature. These were because a liquid phase was formed as the increasing the sintering temperature. In the case of the specimens manufactured in this study containing fly ashes discharged from the fluidized bed combustor in a the thermal power plant and 10~90 wt% of clay, the specific gravity was 0.9~1.8 and the water absorptivity was 8~60%, therefore it is considered that those results can be applied to the light or heavy aggregates.

• 연구논문집
• /
• s.32
• /
• pp.55-64
• /
• 2002

Performance demonstration with real flawed specimens has been strongly required for nondestructive evaluation of safety class components in nuclear power plant. Specimen has been designed to produce mechanical fatigue flaw with tension stress and fatigue flaw has been produced to control stress and cycle, for suitable roughness. Notch condition is considered for control of fracture mode. After seal welding for fracture surface, final welding was performed to complete flaw specimen with GTAW(Gas Tungsten Arc welding) and FCAW(Flux Cored Arc Welding). It was demonstrated flaw size of flawed specimen by radiographic. testing and ultrasonic testing.

• Applied Microscopy
• /
• v.42 no.3
• /
• pp.147-150
• /
• 2012

A recently introduced helium ion microscopy (HIM) was employed to observe uncoated pine leaf specimens. Adult leaves were collected from the seedlings of Pinus densiflora and P. rigida, air-dried at room temperature, and observed by HIM without metal coating. Ovoid or round stomata and distinct Florin rings could be discerned. The epicuticular waxes were present in the epistomatal chambers and Florin rings of stomata on the leaf surface. The epicuticular waxes were mostly straight, cylindrical, and ca. 1 ${\mu}m$ in length. The epistomatal chambers of P. rigida were filled with the epicuticular waxes, whereas those of P. densiflora were not filled with the epicuticular waxes. Based on their micromorphology, the epicuticular wax structures of the pine species were identified as tubules. These results suggest that the HIM could be used for the investigation of the plant stomata and epicuticular waxes of uncoated plant leaves. Due to the smaller ion probe and interaction volume, the HIM has advantages over conventional field emission scanning electron microscopy in terms of image resolution and charge neutralization.

• Journal of Power System Engineering
• /
• v.8 no.2
• /
• pp.12-17
• /
• 2004

In this study, to verify the reliability of the indentation for measuring welding residual stresses to get in method we compared the results of the method with those measured by the saw cutting method. Also for the same purpose we used a 4-point bending test and confirmed the reliability of indentation method. The specimens used in this experiment are made with the same conditions for hot reheater pipes and cold reheater pipes used in the electric power plant. Therefore we could know that the results of the methods showed the reliability of the method to obtain welding residual stresses.

• CELLMED
• /
• v.3 no.2
• /
• pp.14.1-14.4
• /
• 2013

The paper provides a brief account of 11 plant species used by the tribal people of the district Purulia, West Bengal, India. Most of the plant species are common in this district and some have not been reported earlier for abortive purposes, pharmacology for preparation of medicines for antifertility. All these data were obtained from the tribal medicine men (ojha). At least 10 interview reports of various tribal medicine men were recorded. Parts of various medicinal plants were observed personally, collected and preserved as herbarium specimens for proper identification. The reports of various indigenous methods may help to give some clue in searching the potent contraceptives.

• Journal of the Korean Society for Advanced Composite Structures
• /
• v.6 no.2
• /
• pp.17-22
• /
• 2015

In this paper, we study the calculation for the fracture area of the composite material specimens using digital image processing techniques. This study was able to calculate the area of the fracture region through the main operation step 7 on the basis of improved image. To extract the area in the original image, we have to use opening operation, close operation, the Hit-or-Miss operation and Bottom hat filter, Top hat filter, etc. In particular, to extract the area of the composite specimen discussed in this study, we have to use the combination of the operations and filters because it is non-isotropic material, or should develop a new algorithm based on it.