• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.60 no.1
• /
• pp.33-40
• /
• 2015

Soybean is very useful crop to supply vegetable protein for human. Supply of soybean is increased because it has useful ingredient. Recently, cultivation of soybean in paddy field is increasing due to the increase of rice stockpile in Korea. Hence, in this study, expression of protein was identified regarding different environment for cultivation to investigate the effect of different environment on protein expression. Two-dimensional electrophoresis was performed to investigate the expression of protein using image analysis program to measure degree of protein expression in numerical value. Hannam-kong, Beakcheon-Kong, Hwangkeum-Kong, and Danwon-Kong were used as plant material. 2-DE combined with image analysis revealed that each degree of protein expression of Hannam-Kong and Hwangkeum-Kong in upland field was higher than degree of protein expression in paddy field. However, in case of Beackcheon-Kong, the phenomenon was opposite. In Danwon-kong, the degree of protein expression was not different between up-land field and paddy field. To this end, major protein spots were not different between paddy field and upland field among all cultivars. It could be suggested that protein expression is not severely different by various environment, but different environment affects degree of protein expression.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.20 no.4
• /
• pp.97-105
• /
• 2012

This study examined for possibility of the food wastewater incineration treatment method as one of overland treatment method by incineration through liquefied spray of food wastewater when incinerating domestic wastes under operation and for the relationship, etc of air discharge material discharged in incineration, and the results of study are as follow: The food wastewater as one of overland treatment method was analysed 94-96% of moisture contents. Temperature of incinerator outduct during mixed incineration of food wastewater with MSW was average $897^{\circ}C$ and incineration of only MSW was $925^{\circ}C$. Temperature of the mixed incineration of food wastewater was dropped about $28^{\circ}C$ by incineration of only MSW. Concentration of nitrogen oxides(NOx) among air discharge gases was studied by 50ppm, 46ppm when inputting $200{\ell}/hr$, $300{\ell}/hr$ into the incinerator as the quantity of food wastewater. In the mixed incineration of food wastewater, generation speed of scales in the inside of a tubular exhaust gas boiler became rapid and the scale generation quantity became large but the exhaust gas boiler normally operated since scales were removed in cleaning of the tube with a compressive air cleaning facility and there was no opening clogging phenomena in a filter cloth of the filtering dust collector. The overland treatment method, not ocean dumping of food wastewater can be proposed as a technology since mixed incineration of food wastewater with MSW in the existing domestic waste incineration plant is possible, and operation costs of the incineration facility were reduced since use of chemicals such as ammonia and urinary hydrogen ion excretion, etc used in incineration facilities for removing nitrogen oxides(NOx).

• Journal of Environmental Science International
• /
• v.28 no.12
• /
• pp.1061-1069
• /
• 2019

Common reed (Phragmites australis) is widespread in reclaimed land and wetland habitats. Every year, the common reed produces extensive colonies by means of underground rhizomes and ground-surface stolons. From an agricultural point of view, the common reed's large biomass is a good material for supplying organic matter. However, it has not yet been studied in terms of seedling production, transplanting conditions, and decomposition characteristics in reclaimed land. Seeds were harvested from the native common reed in Saemangeum, South Korea, the previous year and stored on an open field. The seeds were sowed in the greenhouse at the beginning of April. Common reed decomposition was studied from June to September, with the use of coarse mesh (5 mm) stem litterbags, on three samping dates and with five replicate packs per sample. These packs were dug in five soil condition (low-salinity topsoil, subsoil, high-salinity topsoil, subsoil, paddy topsoil) to 0.2 m and 0.4 m depth. The highest germination rate of common reed seeds was observed in non-salt solution, but the exhibited germination rate was 70% at 9.38 dS m^-1. The plant height of young reed decreased steadily with increasing salinity, but leaf number did not decrease by 9.38 dS m^-1. The survival rate of the two-year-old reed was 83.3%, which was 35% higher than that of the one-year reed. The transplant success rate was 0% in the no vinyl mulching in the soil, but the first year and second year seedlings survived rates were 63% and 83.3%, respectively, in vinyl mulching. Common reed decomposition rates were faster low salinity than high salinity. All nutrient contents were found to fluctuate significantly with time by soil conditions. We also need to study the growth rate of reed transplanting seedlings by soil moisture contents and the comparison of degradation in common reed tissues.

• Ecology and Resilient Infrastructure
• /
• v.3 no.2
• /
• pp.100-109
• /
• 2016

Low impact development (LID) facilities are established for the purpose of restoring the natural hydrologic cycle as well as the removal of pollutants from stormwater runoff. Improved efficiency of LID facilities can be obtained through the optimized interaction of their major components (i.e., plant, soil, filter media, microorganisms, etc.). Therefore, this study was performed to evaluate the performances of LID facilities in terms of runoff and pollutant reduction and also to provide an optimal maintenance method. The monitoring was conducted on four LID technologies (e.g., bioretention, small wetlands, rain garden and tree box filter). The optimal SA/CA (facility surface area / catchment area) ratio for runoff reduction greater than 40% is determined to be 1 - 5%. Since runoff reduction affects the pollutant removal efficiency in LID facilities, SA/CA ratio is derived as an important factor in designing LID facilities. The LID facilities that are found to be effective in reducing stormwater runoff are in the following order: rain garden > tree box filter > bioretention> small wetland. Meanwhile, in terms of removal of particulate matter (TSS), the effectiveness of the facilities are in the following order: rain garden > tree box filter > small wetland > bioretention; rain gardens > tree box filter > bioretention > small wetland were determined for the removal of organic matter (COD, TOC), nutrients (TN, TP) and heavy metals (Cu, Pb, Cd, Zn). These results can be used as an important material for the design of LID facilities in runoff volume and pollutant reduction.

• Korean Journal of Organic Agriculture
• /
• v.18 no.1
• /
• pp.63-74
• /
• 2010

The present study was carried out to evaluate the effects of organic liquid fertilizer (OLFs) fertigation on the growth and fruit quality of hot pepper (Capsicum annuum L.) cv. 'Nokkwang (Seminis Korea)'. Treatments were given with control (chemical feritilzer), OLF I(fowl dropping : fish meal : soybean meal, 2:1:1), OLF II(fowl dropping : bone meal : soybean meal, 2:1:1), OLF III(fowl dropping : bone meal, 1:1), and OLF IV(fowl dropping : rice bran : soybean meal, 2:1:1). The composition ratio of OLF based on weight to weight. The pH and EC of OLFs according to different material and compositions ranged from 6.5 to 6.8, and from 2.91 to $3.69dS{\cdot}m^{-1}$, respectively. The C/N ratio was the highest as 5.75 in OLF Ⅳ, and there was no difference among the treatments in C/N ratio of the exception of OLF IV. In OLF IV total fruit weight was the highest as 1,558g per plant and total fruit number increased as 23.7% compared to control. The content of capsaicin in the ripened pepper increased with OLF I and II treatments, and decreased with OLF III and IV treatments compared to control of $662mg{\cdot}kg^{-1}$, but the soluble solid content was the highest with OLF IV treatment as $10.0^{\circ}Brix$.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.14 no.4
• /
• pp.423-434
• /
• 2016

The importance of severe nuclear accidents and probabilistic safety assessment (PSA) were brought to international attention with the occurrence of severe nuclear accidents caused by the extreme natural disaster at Fukushima Daiichi nuclear power plant in Japan. In Korea, studies on level 3 PSA had made little progress until recently. The code systems of level 3 PSA, MACCS2 (MELCORE Accident Consequence Code System 2, US), COSYMA (COde SYstem from MAria, EU) and OSCAAR (Off-Site Consequence Analysis code for Atmospheric Releases in reactor accidents, JAPAN), were reviewed in this study, and the disadvantages and limitations of MACCS2 were also analyzed. Experts from Korea and abroad pointed out that the limitations of MACCS2 include the following: MACCS2 cannot simulate multi-unit accidents/release from spent fuel pools, and its atmospheric dispersion is based on a simple Gaussian plume model. Some of these limitations have been improved in the updated versions of MACCS2. The absence of a marine and aquatic dispersion model and the limited simulating range of food-chain and economic models are also important aspects that need to be improved. This paper is expected to be utilized as basic research material for developing a Korean code system for assessing off-site consequences of severe nuclear accidents.

• International Journal of Highway Engineering
• /
• v.17 no.3
• /
• pp.85-95
• /
• 2015

PURPOSES : Recently, bonded concrete overlay has been used as an alternative solution in concrete pavement rehabilitation since its material properties are similar to those of the existing concrete pavements. Deteriorated concrete pavements need rapid rehabilitation in order to prevent traffic jams on Korean expressways. Moreover, speedy and effective repair methods are required. Therefore, the use of bonded concrete overlay with ultra-rapid hardening cement has increased in an effort to reopen promptly the expressways in Korea. However, mobile mixer is required for ultra-rapid hardening cement concrete mixing in the construction site. The use of mobile mixer causes various disadvantages aforementioned such as limitation of the construction supply, open-air storage of mixing materials, increase in construction cost, and etc. In this study, therefore, hydration accelerator in-situ mixing on polymer modified concrete produced in concrete plant is attempted in order to avoid the disadvantages of existing bonded concrete overlay method using ultra-rapid hardening cement. METHODS : Bonded concrete overlay materials using ultra-rapid hardening cement should be meet all the requirements including structural characteristics, compatibility, durability for field application. Therefore, This study aimed to evaluate the application of hydration accelerator in-situ mixing on polymer modified concrete by evaluating structural characteristics, compatibility, durability and economic efficiency for bonded concrete overlay. RESULTS : Test results of structural characteristics showed that the compressive, flexural strength and bond strength were exceed 21MPa, 3.15MPa and 1.4MPa, respectively, which are the target strengths of four hours age for the purpose of prompt traffic reopening. In addition, tests of compatibility, such as drying shrinkage, coefficient of thermal expansion and modulus of elasticity, and durability (chloride ions penetration resistance, freezing-thawing resistance, scaling resistance, abrasion resistance and crack resistance), showed that the hydration accelerator in-situ mixing on polymer modified concrete were satisfied the required criteria. CONCLUSIONS : It was known that the hydration accelerator in-situ mixing on polymer modified concrete overlay method was applicable for bonded concrete overlay and was a good alternative method to substitute the existing bonded concrete overlay method since structural characteristics, compatibility, durability were satisfied the criteria and its economic efficiency was excellent compare to the existing bonded concrete overlay methods.

• Proceedings of the Korea Technical Association of the Pulp and Paper Industry Conference
• /
• 2011.10a
• /
• pp.39-41
• /
• 2011

The recycling rate of recovered paper in Korea is the highest in the world, 92%, but remanufacturing yield is low due to the extremely poor quality of the paper. The poor quality, in turn, influences to the reject amount in deinking process. To increase the yield of old newspaper recycling process, hydrophobic degree of inorganic pigments of deinking stock must be reduced. To determine the hydrophobicity, Pitch Potential Deposit Tester (PDT) was newly designed and applied with respect to the SB latex property of various quality used in Korea; its hydrophobic degree according to Tg, gel content, charge and particle size of latex and optimum designing condition of SB latex. And below are the conclusions: 1. The reason of excessive reject from old newspaper deinking process for total amount of printed ink is loss of inorganic pigments. When lipase, a biochemical catalyst, was applied with the purpose of preventing inorganic pigments loss about more than 70% of total reject weight and promoting hydration of pulp for deinking, deinking process yield of pre flotation secondary stage increased remarkably without any changes of deinking efficiency. 2. Lipase improved deinking stock by cutting ester linkage on surface of hydrophobic materials to promote its hydration. From this, it reached the conclusion that hydration degree of stock exercises significant effect on flotation deinking process yield. 3. Inorganic alkali promotes hydration of deinking stock. But there have been needs for more fundamental measures other than inorganic alkali of promoting hydration for yield improvement. For this, this study intended to find out reasons of chemical properties change on surface of hydrophobic material by change of pH. 4. Pitch Deposit Test (PDT) was performed for understanding principle of why surface of coating flake from OMG is hydrophobic and why it becomes hydrophilic when pH of stock is alkaline. As a result of this test, it is determined that swelling property by change of pH of latex film, which were used as coating adhesive is the reason for hydrophobic change. 5. Hydrophilicity of coating flake increased with hydrophilic pigments. And as more of SB Latex adhesive was used and higher of calcium hardness of stock became, its hydrophilicity decreased. SB Latex adhesive film is reformed by mechanical friction. For having hydrophilicity under neutral pH, strong bruising action such as kneading is required. 6. Because swelling of adhesive film decreases as Tg of SB latex gets lower and mean diameter gets smaller, it shows hydrophobicity under neutral pH. This lowers hydrophilicity of coating flake, which leads to easy elimination with flotation reject on DIP process. Therefore, for improving future flotation yield, it is necessary to develop to use eco-friendly clean SB latex by raising Tg and increasing mean diameter for recycling, and as a result, to reduce excessive loss of coating flake as a reject from deinking process.

• Korean Journal of Organic Agriculture
• /
• v.17 no.1
• /
• pp.83-94
• /
• 2009

This study was carried out to investigate the effect of application of spent mushroom compost(SMC) on soil chemical properties and tomato growth. After the mushroom has been harvested, the SMC contains a lot of organic material, different microorganism and high density of mushroom hypha. SMC of white button mushroom(Agaricus bisporus) contained diverse microorganisms including fluorescent Pseudomonas sp. and actinomycetes. These isolates showed strong antagonistic to bacterial wi1t(Ralstonia solanacearum) and fusarium wi1t(Fusarium oxysporum) of tomato. The growth and sugar content of tomato showed no significant difference with other treatments by stage of maturity. The EC, exchangeable K and Ca contents of the soil during growing stage were increased in comparison to those of farmhouse practice, but available phosphate decreased. Microbial population in the soil in all growing stages showed no significant difference with other treatments, but yield of tomato decreased in some way in comparison to farmhouse practice. As the result of analysis on chemical property of soil and plant growth and yield of tomato, it seems likely that SMC of white button mushroom(Agaricus bisporus) may be used as substitute of practice compost on cultivation of tomato.

• Korean Journal of Organic Agriculture
• /
• v.25 no.2
• /
• pp.419-429
• /
• 2017

We investigated the occurrence pattern of diseases and insect pests and disease control efficacy of organic materials against watermelon powdery mildew in small type watermelon in Eumseong, Chungcheongbuk-do, 2015. The result of this study, the small type watermelon was damaged by diseases and pests such as Didymella bryoniae, Podosphaera xanthii, Aphis gossypii, Tetranychus urticae, thrips, Spodoptera exigua and Spodoptera litura. Among them, the occurrence of P. xanthii, T. urticae and thrips was high. Diseased leaf rate by P. xanthii, a casual agent of powdery mildew, was 27~99.3% in three small type watermelon cultivars in the middle of June. The number of T. urticae per leaf was high from 79.9 to 111 in three small type watermelon cultivars in the middle of June. It showed high number of thrips captured by yellow and blue sticky trap. Highest numbers of yellow sticky trap (407) and of blue sticky trap (774) were detected in the middle and first of June, respectively. The disease control efficacy of mayonnaise, oleic acid and three organic materials against powdery mildew of small type watermelon in fields was evaluated. As thre results, the symptoms of plant disease were effectively reduced by over 60% in the treatments of materials such as sodium bicarbonate 80%, mayonnaise and the extract of Rheum palmatum 1%. The highest control efficacy was 83% in the treatment of sodium bicarbonate 80%. From this study, we had a information of the occurrence pattern of diseases and insect pests in small type watermelon and the treatment of material containing sodium bicarbonate 80% was very effective for controlling against powdery mildew.