• Journal of Conservation Science
• /
• v.28 no.3
• /
• pp.205-216
• /
• 2012

65 samples of glass bead excavated from Mahan tombs of Asan Bakjimeure site consists of 13 of potash glass group and 52 of soda glass group and soda glass is superior in numbers. When classified according to color, purple blue glass bead is accompanied potash and soda glass group whereas purple glass bead is potash glass group and red, greenish blue, green and gold foil glass bead is soda glass group. Purple blue glass bead is classified as LCA type in which the content of the stabilizer is low. Of this, the soda glass categorized as LMK type with low content of MgO and $K_2O$ is determined that natron is used as the raw material. As to red glass, the homogeneous glass is LCA-B/HMK type and the heterogeneous glass is HCLA/LMK type. Thus, each of these two types are likely to be used plant ash and natron respectively. Greenish blue and green glass depends of the type that round glass is LCA-A/LMHK type and the segmented glass is LCA-B/HMK type. The gold foil glass bead is manufactured by the purity of 19.9~22.6K gold foil and the soda glass of HCLA/LMK type. In other words, the most of the glass bead of Asan Bakjimeure site is similar to the composition of the glass confirmed in other sites of the Baekche period. On the other hand, the greenish blue and green segmented bead and some red round bead is a different chemical composition is considered that the difference in raw materials. These characteristics is expected to be an important evidence for the understanding of the trade system of the ancient glass.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.12 no.4
• /
• pp.287-297
• /
• 2014

For several decades, many countries operating nuclear power plants have been studying the various disposal alternatives to dispose of the spent nuclear fuel or high-level radioactive waste safely. In this paper, as a direct disposal of spent nuclear fuels for deep geological disposal concept, the rod consolidation from spent fuel assembly for the disposal efficiency was considered and analyzed. To do this, a concept of spent fuel rod consolidation was described and the related concepts of disposal canister and disposal system were reviewed. With these concepts, several thermal analyses were carried out to determine whether the most important requirement of the temperature limit for a buffer material was satisfiedin designing an engineered barrier of a deep geological disposal system. Based on the results of thermal analyses, the deposition hole distance, disposal tunnel spacing and heat release area of a disposal canister were reviewed. And the unit disposal areas for each case were calculated and the disposal efficiencies were evaluated. This evaluation showed that the rod consolidation of spent nuclear fuel had no advantages in terms of disposal efficiency. In addition, the cooling time of spent nuclear fuels from nuclear power plant were reviewed. It showed that the disposal efficiency for the consolidated spent fuel rods could be improved in the case that cooling time was 70 years or more. But, the integrity of fuels and other conditions due to the longer term storage before disposal should be analyzed.

• Applied Biological Chemistry
• /
• v.20 no.2
• /
• pp.236-241
• /
• 1977

Analytical method of carbofuran (2,3-dihydro-2, 2-dimethyl-7-benzofuranyl methyl carbamate) residues and its persistence in rice seeds, rice seedlings, rice plants and soils were studied by gas-liquid chromatographic analysis using electron capture detector. 1. The effective column material for clean-up is Florisil (5% $H_2O$)+Alumina (4% $H_2O$)+absorbent mixture with rinsing the first 300l of eluants to remove impurities in the column materials. 2. The method of applying an gelatin encapsulated carbofuran to the root zone of rice plant is the longest persistence in its residues. 3. By seed treatment, no carbofuran residues were detected in rice seeds and seedlings. 4. The amounts of carbofuran residues in rice seedlings is in proportion to the soaking time of rice seedlings in carbofuran solution rather than the concentration of the chemical. 5. Applying carbofuran by root zone has the higher and the loger residual effect than broadcast. 6. Persistence of carbofuran in the high clay content soil is longer than in the low clay content soil. 7. No carbofuran residue was detected in rough rice at havesting time.

• Journal of the Korean Applied Science and Technology
• /
• v.35 no.3
• /
• pp.622-632
• /
• 2018

The aim of the present study was to evaluate of turmeric (Curcuma longa L.) on the physiological activities and oxidation inhibitory action. The effects of various solvents (distilled water DW, 70% ethanol and n-butanol) on the total phenolics content (TPC) of turmeric and their corresponding biological activity were studied. Bioactive compound of total saponin $7.506{\pm}0.349mg\;SE/g$ dry weight. Turmeric extracts yield were DW (17.11%), 70% ethanol (15.26%) and n-butanol (4.12%), respectively. Oxidation inhibitory action of the samples exhibited a dose-dependent increase. However, in the current study, none of the samples evaluated showed activity as strong as the BHA, ascorbic acid and EDTA. Results showed that extraction solvent had significant effects on TPC and oxidation inhibitory action (DPPH radical scavenging activity, ABTS radical scavenging activity, reducing power and ferric reducing antioxidant power) of n-butanol. Turmeric exhibited the antioxidant properties, which suggests that the plant material could be used for further studies as a potential source for bioactive and natural antioxidant.

• The Journal of the Korea Contents Association
• /
• v.17 no.11
• /
• pp.221-228
• /
• 2017

This paper aimed to find out the eco-friendly approach enabling to directly print patterns and dye colors on fabrics using leaves of plants. In the research process, I found out the 'eco-printing' which could effectively express unique colors and patterns of plants. While eco-printing can design the patterns and colors of plants in nature using the leaves of plant(Eucalyptus), it is difficult to implement because it is not systematically and academically investigated including the dictionary definition in Korea until now. Thus, I tried to define the eco-printing and natural dyeing using leaves or flowers of plants enabling to get natural patterns and colors and do the experimental research and production using the leaves of Eucalyptus. The leaves of Eucalyptus were arranged on a wool scarf and a silk scarf, tied and applied pressure to them and made pigments penetrate into fabrics by heating or steaming them. This approach is to directly print the patterns using the shapes of plants on fabrics unlike the existing approaches dyeing by extracting dyeing solution from natural materials. Furthermore, the change of colors was attempted by using the color fixers. In accordance with the results of this experimental research, the scarf design differentiated from the existing products could be acquired. It was identified that eco-printing could induce the color variables depending on the conditions of each material and environment. For improving the color variables, various kinds of fabrics and divers kinds of materials which can be easily acquired in a daily life will be investigated and compared. Furthermore, it is expected that the experimental research and production techniques on eco-printing be utilized when starting natural dyeing and the scope of natural dyeing be more expanded.

• The Journal of the Acoustical Society of Korea
• /
• v.15 no.6
• /
• pp.81-89
• /
• 1996

It is very important for ultrasonic test method to evaluate the integrity of the class I components in nuclear power plants. However, as the rltrasonic test is affected by internal structures and configurations of test materials, backscattering, that is, time invariant noise is generated in large grain size materials. Due to the above reason, the received signal results in low signal to noise(S/N) ratio. Split spectrum processing(SSP) technique is effective to suppress the grain noise. The conventional SSP technique. however, has been applied to unique algorithm. This paper shows that MPO(minimization and polarity threshold) algorithm which two algorithms are applied simulatancously, was utilized, the signal processing time was shorten by using the new constant-Q SSP with the FIR filter which frequency to bandwidth ratio is constant and the optimum parameters were analysed for the signal processing to longitudinal wave and shear wave with the same requirements of inspection on nuclear power plant site. Moreover, the new ultrasonic test instrument, the reference block of the same product form and material specification, stainless stell test specimens and copper test specimens block of the same fabricated for the application of new SSP technique. As the result of experimental test with new ultrasonic test instrument and test specimens, the signal to noise ratio was improved by appying the new SSP technique.

• Journal of Korean Society of Environmental Engineers
• /
• v.30 no.7
• /
• pp.705-711
• /
• 2008

In case of the domestic condition, as the initiating from Sumjin River Dam, total 14 units of multipurpose dams had been constructed in 1965 for the roles of flood control, waterpower generation, irrigation, water supply, industrial water supply. In the case of such multipurpose dam, it produces electric energy by converting the potential energy utilizing its head and quantity of the water into kinetic energy. However, in this process, since during the time when the turbine connected to the hydraulic turbine dynamo revolves and there occurs a loud noise, it brings the physical, mental bad influences to those people also a decline of an effective working efficiency. On such point of view, after selection of various 16 measurement points, this study has measured and analyzed the travelling characteristics of noise generated at the hydraulic turbine dynamo in Daechung Dam, and also has evaluated the degree of indoor noise using the evaluation index such as PSIL, NC. As the result of noise-evaluation, in case of Daechung Dam, since the noise damage grade appears very seriously at various spaces, it is considering that its soundproof measure would be necessitated keenly. Also, it is considered that such data could be utilized as the valuable material hereafter for establishment of an efficient noise-reduction countermeasure and a comfortable working environment for the hydraulic turbine dynamo plant.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.11 no.6
• /
• pp.2021-2029
• /
• 2010

This paper suggested the method to design and analyze FMC robot's dispatching rule using the Simulation and Sequential Patterns. To do this, first of all, we built FMC using simulation and then, extracted signals that facilities call a robot, saved it as the log type. Secondly, we built robot's optimal path using the Sequential Pattern Mining with the results of analyzing the log and relationship between machine and robot actions. Lastly, we adapted it to the A corp.'s manufacturing line for verifying its performance. As a result of applying the new dispatching rule in FMC, total throughput and total flow time decrease because of decreasing material loss time and increasing robot utility. Furthermore, because this method can be applied for every manufacturing plant using simulation, it can contribute to advance total FMC efficiency as well.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.32 no.6 s.107
• /
• pp.103-108
• /
• 2005

It was aimed to promote as a material for interior landscape by validating Rumohra aristata, in an indoor environment, especially irrigation interval, medium composition and drainage at indoor. 1. The result of physico-chemical analysis of medium composition showed that porosity, pH and Ex-Ca, Ex-Mg and Ex-K were high with peatmoss: vermiculite: perlite(1:1:1) and water contents, organic matter content, total nitrogen and cation exchange capacity were high with sand: leaf mold(1:1). 2. Growth and indoor adaptability of Rumohra aristata were better with irrigation at 2 interval per week than irrigation at 7 interval per week regardless of drainage. 3. In the case of medium composition, of growth and indoor adaptability were higher with sud: leaf mold (1:1) than peatmoss: vermiculite: perlite(1:1:1). 4. Fronds fresh weight and dry weight decreased when irrigation interval increased and were higher with sand: leaf mold(1:1) than peatmoss: vermiculite: perlite(1:1:1) treatment.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.26 no.2
• /
• pp.54-61
• /
• 1998

The subsurface environment of the root zone area can set the stae for "do or die" of the turfgrass plant. The good condition of the greens is verified by their physical properties. Therefore, this study was carried to evaluate on the existing green of Hwasan C.C. by undisturbed soil Core Anaysis. We completed the ISTRC SYSTEM BenchMarking of the undisturbed core samples taken from Green #1, Green #5, Green #9-"Best" area, and Green #9-"Stressed" area for the Hwasan C.C.. It was also our understanding that the greens were in "good" to "very good" conditioni. THe exception might be Green #9-"Stress" area, which was the stressed area. The stressed area was confined to a ridge across Green #9. The organic content test results comfirmed the development of organic layering in depth 0-2.5cm. For the amount of compaction in the upper root zones and te development of the green's respective organic layers, the infiltration rates were high in Green #1, Green #5, and Green #9 "Stressed" area. The depicted aerificaton hole might be the probable cause of the relatively high infiltraton rate. Green #9-"Best" area had a tested infiltration rate of 18.75cm/hr. Either this area had not been aerified, or the undisturbed sample did not contain a aerification cavity. The water retention capacity of the undisturbed samples was good. When the greens were first constructed, the original root zone mix had been relatively low water retention properties. And the bulk density and the porosity of the undisturbed samples were good. In the result, all the greens were similar except for the infiltration. Thus, we supposed that Green #9-"Stressed" area might be ainly influenced by the amount of irrigation water and the configuration of the green's surface. There had been a reduction in the amount of irrigation water as the water retention capacity in the greens was promoted. Especially, it had gradually become more of a problem as the green had matured in Green #9-"Stressed" area. Because Green #9-"Stressed" area was a ridge area. The reduction in the amount of irrigation water might be the probable cause of the stress in Green #9-"Stressed" area. Our final observation related to the soil texture and the particle size distribution of the sand. Though and sand contant of all the tested greens were good, the gravel content of them exceeded ISTRC Guidelines. In particle size distribution of the sand, the very coarse and the coarse content of all the tested greens exceeded, but the rest was insufficient. The stability is a function of the material retained on the 0.25mm mesh screen. But, the content of all the tested greens was very insufficient. Though all the greens was serviceable, the coarse root zone sands, such as the sand in the tested greens, tended to be "unstable". Thus, we recommend using a topdressing/aerification sand which should be more in line with ISTRC/USGA Guidelines.;unstable". Thus, we recommend using a topdressing/aerification sand which should be more in line with ISTRC/USGA Guidelines.ines.