• Title/Summary/Keyword: Plant material

Search Result 2,185, Processing Time 0.037 seconds

Case Studies on Shock Vibration at Coal Silo Structure of Power Plants (화력발전소 Coal Silo 구조물의 충격성 진동에 대한 사례 연구)

  • Im, Jung-Bin;Lee, Hong-Ki;Son, Sung-Wan;Park, Sang-Gon
    • Proceedings of the Korean Society for Noise and Vibration Engineering Conference
    • /
    • 2005.11a
    • /
    • pp.103-106
    • /
    • 2005
  • This paper reviews the dynamic load phenomenon referred to as 'silo quaking', caused shock vibration and loud noise, during gravity discharge in coal silos. Quaking in tall silo is examined using experimental data obtained from a Coal Power Plant and several experimental and numerical investigations available in the published literature. In the experiment, the acceleration was measured at various height on the silo column and floor and by doing so, not only could the variation of the amplitude of the quaking be observed, but also the propagation of waves could clearly be seen. Through an overview of recent research on this subject, it is shown that the current silo quaking is produced by slip-stick friction between the internal wall of silo and the granular material, i.e. coal.

  • PDF

Effects of Sewage Treatment on Characteristics of Sludge as a Composting Material (하수처리가 퇴비화를 위한 하수 슬러지 특성에 미치는 영향)

  • Kim, Jae-Koo;Kim, Jong-Soo
    • Applied Biological Chemistry
    • /
    • v.41 no.2
    • /
    • pp.181-186
    • /
    • 1998
  • The effects of sewage treatment on characteristics of sludge as a composting material were investigated for a year during the initial operation at the full-scale Chunan sewage treatment plant. Due to the shortage of design capacity of belt press, a sludge dewatering unit, non-volatile solids were recirculating and concentrating in the treatment plant, resulting in an increase of MLSS and a decrease in F/M ratio at the activated sludge system. Special attention is required for long term operations since the increase of non-volatile solids in the plant would deteriorates the treatment efficiency. The sewage sludge of the Chunan sewage treatment plant showed 79.5% of water content, 11.6% of organic content, and C/N ratio of 6.1, and contained As 1.8 mg/kg, Cd 27 mg/kg, Hg <0.1 mg/kg, Pb 54 mg/kg, T-Cr 370 mg/kg, and Cu 1,100mg/kg of heavy metals. In order to be used as raw material for optimum composting, the sewage sludge requires bulking agents for moistrure/porosity control and a carbon source for adjusting C/N ratio. However, the sewage sludge is not adequate as a soil conditioner after composing due to a high content of heavy metals. If the sewage sludge has to he used as a soil conditioner after composting, it as required to identify and remove tire industrial wastewater portions in tire influent of the plant since heavy metals in the influent were mostly concentrated in dewatered sludge.

  • PDF

Development of Card News as an Educational Material for the Proper Use of Plant-Based Milk Alternatives Reflecting Adult Consumption Characteristics through Focus Group Interview (성인 소비자 대상 Focus Group Interview를 반영한 식물성 대체우유의 바른 이용을 위한 카드뉴스 교육자료 개발)

  • Kim, Sun Hyo
    • Journal of Korean Home Economics Education Association
    • /
    • v.35 no.1
    • /
    • pp.53-72
    • /
    • 2023
  • This study aimed to develop educational material on the proper use of plant-based milk alternatives in the form of a card news, based on a focus group interview(FGI) with adult consumers. The FGI participants were individuals who had directly purchased cow's milk, soy milk, or other plant-based milk alternatives within the past three months and consumed them at least once a month. The study consisted of 17 adults between the ages of 19 and 63 years who met these criteria(9 males and 8 females). It was identified what participants were curious about, interested in, and needed information regarding the proper use of plant-based milk alternatives through FGI. A 10-page card news was developed that was highly usable, taking into account the FGI results and the latest literature. In conclusion, this study developed a card news aimed at promoting the proper use of plant-based milk alternatives, which can be easily disseminated online in line with the trends in food consumption and digitization. The results of this study suggest that the continuous development and distribution of educational materials that reflect food consumption trends and maximize their usability should be provided for dietary life education, such as school subjects or out-of-school programs.

Constituents Analysis of Amino Acid and Antioxidative Activity from Cultivated Callus and Rhizome in Rhodiola sachalinensis

  • Song, Won-Seob;Chi, Hyung-Joon;Rim, Yo-Sup;Yoon, Jae-Ho
    • Plant Resources
    • /
    • v.5 no.1
    • /
    • pp.78-85
    • /
    • 2002
  • The material of Rhodiola sachatinensis collected from an alpine region of the west-northern China. For analysing the effect, 1 used Rhodiola sachatinensis's rhizome and cultivated callus. In EtOAc, BuOH, $H_2O$ separation the plant showed strong antioxidative activity, but not in Hexane. The radical scavenging effect of EtOAc(RC$_{50}$,35(g), BuOH(RC$_{50}$, 43(g), H$_2$0(RC$_{50}$, 50(g) fraction and MeOH extract(RC$_{50}$, 50(g) of the Rhodiola sachatinensis was comparable to that of synthetic antioxidant BHA(RC$_{50}$, 14(g) and $\alpha$-Tocopherol(RC$_{50}$, 12(g). Total amino acid concentration of plant of In nature condition were 18,009ppm, and major components were arginine, glutamic acid, aspartic acid and valine. The ratio of essential/total amino acid on plant of In nature condition was 46.93%. Total amino acid concentration of callus of In vitro condition were 32,435ppm, and major components were valine, histidine, lysine and leucine. The ratio of essential/total amino acid on callus of In vitro condition was 56.07%. was 56.07%.

  • PDF

Evaluation on Properties of Mortar Using Magnetically Separated Bottom Ash (자력 선별된 바텀애쉬를 활용한 모르터의 물성 평가)

  • Choi, Ik-Je;Jang, Bo-Kil;Kim, Ji-Hyun;Chung, Chul-Woo;Lee, Jae-Yong
    • Proceedings of the Korean Institute of Building Construction Conference
    • /
    • 2015.11a
    • /
    • pp.99-100
    • /
    • 2015
  • Significant amount of bottom ash has been produced in the power plant located at southeast region of Korea, but those were abandoned in the pond site without any treatment. In these days, there is a strong move to enforce environmental regulations to protect surrounding nature, a lot of pressure is given to the power plant industry to remove hazardous chemicals from their waste material before landfill or site storage. The overall objective of this research is to separate hazardous chemicals from the bottom ash, and use it safely as sustainable construction material. In this specific study, magnetic separation of bottom ash was applied, and used as a fine aggregates to make mortar specimens. According to the results, it was found that the use of bottom ash decreased 28-day compressive strength. However, using non-magnetic bottom ash provides best results in terms of thermal conductivity, showing strong possibility to be used as heat insulating material.

  • PDF

Integrity Evaluation and Root Cause Analysis of Cracks at the Volute Tongue of Centrifugal Pump (원심펌프 벌류트 혀의 균열 원인분석 및 건전성 평가)

  • Park, Chi-Yong;Kim, Jin-Weon;Kim, Yang-Seok
    • The KSFM Journal of Fluid Machinery
    • /
    • v.3 no.4 s.9
    • /
    • pp.7-14
    • /
    • 2000
  • This paper provides integrity evaluation and root cause analysis for defects observed at volute tongue, or cutwater, of the operating centrifugal pump in power plant. The cause of the cracks are analyzed and reviewed from the viewpoint of the operation and maintenance of the pumps, and the sample obtained from the cracked volute tongue of the pump are examined. At first, in-situ hardness test and microstructure examination were performed to understand the cause of cracking at volute tongue. The evaluation of structural integrity and the possibility of the crack propagation is also evaluated. Cracks were typical intergranular cracking and propagated along with prior austenite grain boundary. At easing volute tongue, the hardness was higher than ASTM requirement and a large amount of intergranular Cr carbide was precipitated. These were due to high C content in material. P content was also higher than ASTM requirement. Therefore, Cr carbide precipitation and P segregation at grain boundary, caused by higher C and P content in material, resulted in intergranular cracking of casing volute tongue. This procedure for integrity evaluation and root cause analysis is used to guide, and support the pump designer and manufacturer's material selection and process design to avoid a costly, unplanned outage of plant.

  • PDF

Occurrence of dsRNA Mycovirus (LeV-FMRI0339) in the Edible Mushroom Lentinula edodes and Meiotic Stability of LeV-FMRI0339 among Monokaryotic Progeny

  • Kim, Jung-Mi;Yun, Suk-Hyun;Park, Seung-Moon;Ko, Han-Gyu;Kim, Dae-Hyuk
    • The Plant Pathology Journal
    • /
    • v.29 no.4
    • /
    • pp.460-464
    • /
    • 2013
  • dsRNA was found in malformed cultures of Lentinula edodes strain FMRI0339, one of the three most popular sawdust cultivated commercial strains of shiitake, and was also found in healthy-looking fruiting bodies and actively growing mycelia. Cloning of the partial genome of the dsRNA revealed the presence of the RdRp sequence of a novel L. edodes mycovirus (LeV), and sequence comparison of the cloned amplicon showed identical sequences sequence to known RNA-dependent RNA polymerase genes of LeV found in strain HKA. The meiotic stability of dsRNA was examined by measuring the ratio of the presence of dsRNA among sexual monokaryotic progeny. More than 40% of the monokaryotic progeny still contained the dsRNA, indicating the persistence of dsRNA during sexual reproduction. Comparing the mycelia growth of monokaryotic progeny suggested that there appeared to be a tendency toward a lower frequency of virus incidence in actively growing progeny.

Solidification and Leaching Characteristics of Cyclone Ash from Industrial Incineration Plant

  • Lee, Dong-Choon;Kim, Young-Ju
    • Environmental Sciences Bulletin of The Korean Environmental Sciences Society
    • /
    • v.10 no.S_2
    • /
    • pp.89-95
    • /
    • 2001
  • The solidification and leaching characteristics of cyclone ash collected from an industrial incineration plant were investigated. Cement and calcium hydroxide were used as the solidifying materials. The leaching characteristics of the solidified cyclone ash were found to vary depending on both the quantitative and the qualitative aspects of the solidifying materials. Except for copper and lead, all the heavy metal ions in the leachate of the solidified material composed of 10~20 % cement or 10~20 % calcium hydroxide were found to be within their standard limit. Moreover, all the heavy metal ions were also observed to be within satisfactory limits in the leachate obtained from the solidified material composed of 30 % cement or 30 % calcium hydroxide. Therefore, to satisfy the standard compressive intensity and permissible limits of heavy metal ions leached from solidified material, it would appear that a 30 % proportion of either additive in the solidification product can meet the required standard for the leachate. The cost of solidifying cyclone ash per ton for ash-30 % cement and ash-30 % lime was calculated as 26,750 and 26,070 won, respectively. Accordingly, significant reduction in the waste toxicity and mobility as well as an improvement in the engineering properties of the solidified products were successfully achieved.

  • PDF

Study on Optimization of Dissimilar friction Welding of Nuclear Power Plant Materials (Cu Alloy/STS316L) and Its Real Time AE Evaluation (원자력 발전소용 이종재(Cu 합금/STS316L) 마찰용접의 최적화와 AE에 의한 실시간 평가에 관한 연구)

  • 유인종;권상우;황성필;공유식;오세규
    • Journal of Ocean Engineering and Technology
    • /
    • v.15 no.2
    • /
    • pp.88-93
    • /
    • 2001
  • In this paper, joints of Cu-1Cr-0.1Zr alloy to STS316L were performed by friction welding method. Particularly, Cu-1Cr-0.1Zr alloy is attractive candidate as nuclear power plant material and exibit the best combination of high strength and good electrical and thermal conductivity of any copper alloy examined. The stainless steel is a structural material while copper alloy acts as a heat sink material for the surface heat flux in the first wall. So, in this paper, not only the development of optimizing of friction welding with more reliability and more applicability but also the development of in-process real-time weld quality (such as strength and toughness) evaluation technique by acoustic emission for friction welding of such nuclear reactor component of Cu-1Cr-0.1Zr alloy to STS316L steel sere performed.

  • PDF

Analysis of Expressed Sequence Tags from the Embryogenic Callus of Korean Ginseng (Panax ginseng C.A. Meyer)

  • In, Jun-Gyo;Lee, Bum-Soo;Park, Yong-Eui;Yang, Deok-Chun
    • Proceedings of the Plant Resources Society of Korea Conference
    • /
    • 2003.04a
    • /
    • pp.123-123
    • /
    • 2003
  • In order to study gene expression transcribted during the embryo development, we constructed a cDNA library of embryogenic callus induced from cotylendon of Korean ginseng and generated expressed sequence tags (ESTs) of 3,359 clones randomly selected. The ESTs could be clustered into 1,910 (59.1%) non-redundant groups. Similarity search of the non-redundant ESTs against public non-redundant databases of both protein and DNA indicated that 2,217 groups show similarity to genes of known function. These ESTs clones were divided into eighteen categories depending upon gene function. Most abundant transcripts were ribosomal protein small subunit 28kDa(40), tumor-related protein(35), metallothionein (31), small heat-shock protein class 18.6K(24), and cyclophilin(20). There are no useful informations of gene expression during the embryo development in Korean ginseng. These results could help to understand the embryo development in Korean ginseng.

  • PDF