• Journal of the Korean Wood Science and Technology
• /
• v.46 no.6
• /
• pp.645-655
• /
• 2018

The use of wood waste as substrate for plant growth exemplifies a strategy for turning waste into resources. The overall objective of this research was to evaluate the effects of wood-based growing media on plant cover in a slope area. Moreover, we tried to find out what physicochemical properties affect plant cover on a slope. For treatments, we tested natural soil, soil mixed with wood-based growing medium (1:1, w/w), and wood-based growing medium by itself. Physical and chemical characteristics were evaluated after four months from the date of treatment application to the experimental slope site. Soil coverage with seedlings of Lespedeza cyrtobotrya was measured for plant growth evaluation. Physicochemical properties were altered by mixing the natural soil with wood-based growing medium. Particularly, soil moisture and organic matter contents were significantly changed in soils treated with wood-based growing medium compared to soil alone. We confirmed that plant coverage rate was high when wood-based growing medium was mixed with the natural soil. There was a significant linear relationship between moisture content and CEC (Cation Exchange Capacity) of all growth media tested and plant coverage. This result was expected, as moisture content tends to increase with organic matter content, such as in wood-based growing medium. In conclusion, the high moisture content of the wood-based growing medium was considered effective for plant growth in the experimental slope site, and this wood-based growing medium provides a means to improve the harmony between the slope and the surrounding environment.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.13 no.1
• /
• pp.82-92
• /
• 2010

Removal rates of NO3-N and TN in a free water surface wetland system during emergent plant growing season and non-growing were investigated. The system was established on floodplain in the down reach of the Gwangju Stream in 2008. Its dimensions were 46 meters in length and 5 meters in width. Typha angustifloria L. growing in pots about two years were planted on the half area of the system and Zizania latifolia Turcz on the other half. Water of the stream was funneled into it by gravity flow and its effluent was discharged back into it. Volumes and water quality of inflow and outflow were analyzed from October 2008 to September 2009. Inflow into the system averaged approximately 715 $m^3$/day and hydraulic residence time was about 1.5 hr. Average influent and effluent $NO_3$-N concentration was 3.37 and 2.74 mg/L, respectively and $NO_3$-N retention amounted to 18.7%. Influent and effluent TN concentration averaged 4.67 and 3.69 mg/L, respectively and TN abatement reached to 20.9%. $NO_3$-N removal rate (%) during plant growing season ($22.67{\pm}3.70$, mean ${\pm}$ standard error) was significantly high (p<0.001) when compared with that during plant non-growing one ($15.02{\pm}3.23$). TN abatement rate (%) during plant growing season ($27.42{\pm}5.98$) was also significantly high (p<0.001) when compared with that during plant non-growing one ($13.66{\pm}3.08$).

• Journal of Multimedia Information System
• /
• v.5 no.3
• /
• pp.215-220
• /
• 2018

This work presents a smart water quality sensor for hydroponic plant growing applications. The proposed sensor can effectively measure pH level and electrical conductivity of the water solution. The micro-controller incorporated in the sensor processes the raw sensor data, and converts it into a readable format. In addition, through the mobile interface realized using a WiFi module, the sensor can send data to the web server database that collects and stores the data. The data stored in the web server can be accessed by a personal computer or smart phone. The prototype sensor has been implemented, and the operations have been verified under an actual hydroponic plant growing application.

• Journal of the Korean Wood Science and Technology
• /
• v.45 no.6
• /
• pp.857-871
• /
• 2017

The major substrates used in soilless growing media are peat moss and perlite, where peat moss is a limited and expensive natural resource. Determination of appropriate substrates based on technical and economic feasibility is the vital aspect of research and the key to success in any soilless production system. This research work was performed to evaluate different low-cost and sustainable alternative substrate as soilless growing media for horticulture plant. The objective of this study was to compare the effect of sawdust species and steam treatment, for physico-chemical properties and growth of horticultural plant. This study involves the physical and chemical characterization and growth test of four substrate (pine sawdust, oak sawdust, steamed pine sawdust and steamed oak sawdust) in order to evaluate their use as components of growing media. Steamed oak sawdust ($121^{\circ}C$, 30 min) showed adequate physical and chemical properties compared to peat moss for their use as growing media. The growing media were prepared using different mixture proportion to grow Brassica campestris L., Festuca arundinacea and Lespedeza cyrtobotrya Miq. The highest germination, stem length and leaf area of Brassica campestris L., Festuca arundinacea and Lespedeza cyrtobotrya were observed in 30 minute steamed oak sawdust mixture growing media. The steam treatment condition of sawdust used in the growing media significantly positive affected the germination, the stem length and the leaf area.

• Horticultural Science & Technology
• /
• v.30 no.6
• /
• pp.635-641
• /
• 2012

In Korea, slurry composted and biofiltered (SCB) liquid fertilizer is produced through the composting and biofiltering of animal waste. An appropriate guidelines involving proper treatment of SCB liquid fertilizer on turfgrass should be considered. An experiment was conducted to determine the optimum application amount, timing, and frequency of SCB liquid fertilizer for Zoysia japonica 'Millock'. The SCB liquid fertilizer was applied in low, medium, and high amount (N at 15, 25, and 40 $g{\cdot}m^{-2}$ per year in 2010, and 10, 20, and 40 $g{\cdot}m^{-2}$ per year in 2011, respectively) and treated during the growing season or dormancy period. During the growing season, SCB liquid fertilizer was applied twice or four times. The greatest improvement in turf quality for both years was in SCB plots applied four times with N at 40 $g{\cdot}m^{-2}$ per year during the growing season (SH4). This treatment exhibited turf color retention in the fall, and enhanced clipping yield during the growing and fall seasons. SCB plots with four times during the growing season (SL4, SM4, and SH4) exhibited higher shoot density relative to the same amount of other SCB treatments. Plots treated during the dormancy period also showed a high turf color index during the next growing season in 2011. The results indicate that SCB with high amount up to N at 40 $g{\cdot}m^{-2}$ per year applied four times during the growing season and dormant application produced high turf quality and growth, and could be recommended as an optimum application guide.

• Korean Journal of Agricultural Science
• /
• v.37 no.2
• /
• pp.171-175
• /
• 2010

This study was carried out to find the effect on growing media and proper time for water supply in rice seedling stages. Plant height of rice seedling for SIPAN-BRL among current several growing medias was higher in Chuchungbyeo than Ilpumbyeo, and that of root length was higher in check among used growing medias. Fresh and dry weight of shoot and root of two rice cultivar. Water time to absorption on each treatment of growing media concentration took similarly in SIPAN-BNH and check were similar. But 500 minutes did in 100ppm and did 370 and 470minute in 300 and 500ppm, respectively. Wilting time of rice seedling was appeared highly at 300ppm of SIPAN-BRL in Chuchungbyeo and 100ppm of SIPAN-BRL in Ilpumbyeo, while it prolonged at 300ppm in Chuchungbyeo and 500ppm in Ilpumbyeo, respectively. Water content at wilting stage was appeared highly at SIPAN-BRL 500ppm in both Chuchungbyo and Ilpumbyeo, while SIPAN-BNL was high in 300ppm of Chuchung-byeo and Ilpumbyeo, respectively. Plant and root length of SIPAN-BNL treated with 300ppm in 10day-rice seedling were highly appeared, while dry weight of shoot was high at 300ppm SIPAN-BNL.

• Journal of the Korean Wood Science and Technology
• /
• v.45 no.4
• /
• pp.419-431
• /
• 2017

The forest slopes cause substantial local changes in soil properties and an increase in soil erosion after extreme rainstorms. The high soil erosion rates on forest slopes need the effective use of growing media to control the soil runoff. Therefore, we prepared six different lignocellulosic growing media such as peat, perlite, and wood meal as the base materials and carboxymethyl cellulose (CMC), glucomannan, starch, old corrugated containerboard, and computer printout as the additional materials for the prevention of simulated rainfall-induced runoff. The growing media containing old corrugated containerboard efficiently reduced the percentage of soil runoff; however, it could not completely cushion the influence of crust. The best results for plant growth, except in the leaf area, were also obtained with the growing media containing old corrugated containerboard, suggesting an interesting way of paper recycling and an economic benefit for plant or crop growth in forest slope.

• Proceedings of the Plant Resources Society of Korea Conference
• /
• 2000.05a
• /
• pp.38-44
• /
• 2000

To determine the optimum sowing date and nursery period in Alisma piantago in the southern area of Korea, Alisma plantago local cultivar was grown under three different sowing dates and nursery periods. The plant height, leaf width and leaf length at the area sown on the seedbed in June 30 and conducted the growing seedling in 30 days is 12.1cm, 2.5cm and 3.1cm respectively and it shows tess decrease than that of plant height, leaf width and leaf length with 12.3cm, 2.6cm and 3.2cm respectively which was sown on the seedbed in June 20 and carried out the growing seedling in 30 days, and it also shows less decrease than that of plant height, leaf width and leaf length with 15.2cm, 3.1cm and 5.2cm respectively at the area sown on the seedbed in July 10 and condected the growing seedling in the same date. The stem length, number of stems and diameter of root at the area sown on the seedbed in June 30 and conducted the growing seedling in 30 days is 31cm, 11 and 3.7cm respectively and it shows more increase than that of stem length, number of stem and diameter of and on the other hand shows tess decrease than that of stem length, number of stems and diameter of root with 30cm, 10cm, 35cm respectively which was sown on the seedbed in 30 days, and on the other hand shows less decrease than that of stem length, number of stems and diameter of root with 32cm,13cm,3.9cm respectively at the area sown on the seedbed in July 10 and conducted the growing seedling in the same date, The fresh yield of roots at the area sown on the seedbed in June 30 and conducted the growing seedling in 30 days is 431.4Kg/10a and it shows more increase of 26.9Kg than that of fresh yield of root with 410.59g110a which was sown on the seedbed in lune 20an4 carried out the growing seedling in 30 days, and it also shows more increase of 7Kg than that of fresh yield of root with 430.4Kg/10a at the area sown on the seedbed in July 10 and conducted the growing seedling in the same date. The dry yield of roots at the area on the seedbed in June 30 and conducted the growing seedling in 30 days is 351.9Kg110a which was sown on the seedbed in June 20 and carried out the growing seedling in 30 days, and it also shows more increase of 16.4Kg than that of dry yield of root with 335.4Kg110a at the area sown on the seedbed in July 10 and conducted the growing seedling in the same date. Therefore, the seedling period of proper seedbed for high yield bumper crop of Alisma plantago for exporting to Japan is June 30 and the number of days for seedling is 30 days.

• Journal of Plant Biology
• /
• v.30 no.4
• /
• pp.299-309
• /
• 1987

The seasonal pattern and the annual magnitude of the internal (or biochemical) and plant-soil cycles of phophorus in adjacent three different herb plant populations-Helianthus tuberosus L., Artemisia princeps Pampan and Phalaris anundinacea L.-in an old field of the basin in the Mt. Geumoh were investigated. A lot of the phosphorus demand for the three populations was supplied by the withdrawal from below-ground organ in early growing period, by the absorption from soil in mid-growing period and by the withdrawal from stem in later growing period. But in the A. princeps and P. arundianacea populations, a great deal of phosphorus seemed to be absorbed prior to the first withdrawal. The annual amount of the phosphorus flowing throughthe internal cycle was about 59% of the total hosphorus flow on theorgan level in the H. tuberosus population, 41% in the A. princeps population and 32% in the P. arundinacea population, indicating that the tuber plant had the most developed internal cycle system. The annual amount of phosphorus which took part in the plant-soil cycle in the stand of the three populations was in the range of 4.49-5.65 gPm-2, corresponding to only 3-8% of the extractable phosphorus contained in the soil of 0-20 cm depth. The fact that the H. tuberosus population is higher in the extent fo internal cycle but smaller in the magnitude of plant-soil cycle and lower in the turnover rate of phsophorus than the other two populations suggests that the growth of H. tuberosus population may be less dependent on soil phosphorus availability than those of the other two populations.

• Journal of Biosystems Engineering
• /
• v.23 no.3
• /
• pp.277-284
• /
• 1998

This study was conducted to develop m automatic pot-seedling transplanter for plant factory. The transplanter consists of a gripper, row-spacing control device, nursing tray transfer system, growing trough transfer system, and gripper moving device. The gripper picks up pot-seedling. The gripper moving device moves the gripper between nursing tray and growing-flat. Nursing trays are moved to workspace by the nursing tray transfer system. The growing trough transfer system was developed to move growing trough to workspace. The row-spacing control device was used to adjust the distance between adjacent plants traversely. The results of this study are as follows. The transplanting capacity of the developed transplanter was 7.1 seconds per cycle or 1.18 second per pot-seedling. Successful planting was 98.9% without seedlings and 95.8% with seedlings.