• Proceedings of the KIEE Conference
• /
• 2005.07a
• /
• pp.301-303
• /
• 2005

This paper presents long-term shunt capacitor planning using optimal power flow. OPF allows the planning engineer to find feasible solution with minimal amount of engineering time. We used OPF for Shunt capacitor planning to get an optimal solution. The result of OPF is compared to the analysis by the conventional loadflow method and it is proved that OPF gives more cheaper and better planning solution. With the result, we analyzed the operational perspective for the reactive power supply and demand.

• Proceedings of the KIEE Conference
• /
• 2007.11b
• /
• pp.100-102
• /
• 2007

본 논문에서는 혼합정수 선형계획 법을 이용하여 장기 전력계통 계획수립시 최적의 설비를 투자할 수 있는 기법을 제안하였다. 발전설비와 송변전설비는 하나의 망으로 연결되어 상호 보완적 영향을 주기 때문에 계통계획시 두 설비를 동시에 평가하는 것이 무엇보다 중요하다. 또한 계획기간 전체에 대해 투자비를 고려하여 비용을 최소화해야 한다. 이를 위해 선형계획법을 계통계획에 도입하여 최소비용의 투자비를 가지고 공급 신뢰도 기준를 만족할 수 있는 최적 장기 전력계통 계획 수립기법을 개발하였다. 개발된 기법을 Garver 6모선 계통 및 제3차 전력수급기본계획에 대해 모의하여 결과의 타당성을 검증하였다.

• 전기의세계
• /
• v.27 no.1
• /
• pp.49-55
• /
• 1978

This paper describes a computer method for power system planning. Power system planning was usually studied through individual programs. Because of the laborious work involved in data preparation, the increase of task for power system planning and the time required for the detailed analysis of results, the available time for assessment and decision making has been sacrificed. In order to improve the above situation, the use of data base techniques an the simplified evaluation of the presented programs were newly developed. This program has been used successfully for the routine of power system planning in Korea Electric Company. In addition, this paper describes some results of analysis and evaluation of power system planning in KECO.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.58 no.5
• /
• pp.918-922
• /
• 2009

The power expansion planning is large and capital intensive capacity planning. In the past, the expansion planning was established with the proper supply reliability in order to minimize social cost. However, the planning cannot use cost minimizing objective function in the power markets with many market participants. This paper proposed the power expansion planning process in the power markets. This system is composed of Regulator and GENCO's model. Regulator model used multi-criteria decision making rule. GENCO model is very complex problem. Thus, this system transacted the part by several scenario assuming GENCO model.

• Journal of Electrical Engineering and Technology
• /
• v.10 no.3
• /
• pp.709-718
• /
• 2015

Traditional transmission planning usually caters for rated wind power output. Due to the low occurrence probability of nominal capacity of wind power and huge investment in transmission, these planning methods will leads to low utilization rates of transmission lines and poor economic efficiency. This paper provides a novel transmission expansion planning method for integrating large-scale wind power. The wind power distribution characteristics of large-scale wind power output and its impact on transmission planning are analyzed. Based on the wind power distribution characteristics, this paper proposes a flexible and economic transmission planning model which saves substantial transmission investment through spilling a small amount of peak output of wind power. A methodology based on Benders decomposition is used to solve the model. The applicability and effectiveness of the model and algorithm are verified through a numerical case.

• Proceedings of the KIEE Conference
• /
• 2001.05a
• /
• pp.77-83
• /
• 2001

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.58 no.3
• /
• pp.462-466
• /
• 2009

The power expansion planning is large and capital intensive capacity planning. In the past, the expansion planning was established with the proper supply reliability in order to minimize social cost. However, the planning can't use cost minimizing objective function in the power markets with many market participants. This paper proposed the power expansion planning model using multi-criteria decision rule. This model used multi objective function considering not only cost minimizing but also GENCO's intension. This paper compared proposed model with WASP model in order to verify the result of proposed model.

• Journal of Electrical Engineering and Technology
• /
• v.8 no.1
• /
• pp.1-10
• /
• 2013

The power industry is currently facing many challenges, due to the new environment created by the introduction of smart grid technologies. In particular, the large-scale deployment of electric vehicles (EVs) may have a significant impact on demand for electricity and, thereby, influence generation and transmission system planning. However, it is difficult to deal with uncertainties in EV charging loads using deterministic planning methods. This paper presents a two-stage stochastic decomposition method with Latin-hyper rectangle sampling (LHRS) to solve the integrated generation and transmission planning problem incorporating EV deployment. The probabilistic distribution of EV charging loads is estimated by Latin-hyper rectangle sampling (LHRS) to enhance the computational performance of the proposed method. Numerical results are presented to show the effectiveness of the proposed method.

• Proceedings of the KIEE Conference
• /
• 2008.11a
• /
• pp.214-216
• /
• 2008

현재 전력수급기본계획은 전국을 한일권으로 하여 발전계획을 수립하고 송변전설비계획을 수립하고 있다. 그러나 발전설비와 송변전설비는 하나의 망으로 연결되어 상호 보완적 영향을 주기 때문에 수급계획시 두 설비를 동시에 평가하는 것이 무엇보다 중요하다. 본 논문에서는 혼합정수형 선형계획법(MIP)을 이용하여 발송전 전력설비를 통합적으로 최적 구성할 수 있는 방안에 대하여 분석하였다. 전력수급기본계획 수립시 제출된 건설의향설비에 대해 송변전설비와 통합하여 적정 예비율을 갖는 최적설비 구성방안을 수립하고, 이때의 설비투자비와 운전비를 분석하였다.

• Proceedings of the KIEE Conference
• /
• 2008.11a
• /
• pp.74-76
• /
• 2008

The power expansion planning is large and capital intensive capacity planning. In the past the expansion planning was established with the proper supply reliability in order to minimize social cost. However, the planning not used cost minimizing objective function in the power markets with many market participants. This paper proposed the power expansion planning process in the power markets. This system is composed of Regulator and GENCO's model. Regulator model used multi-criteria decision making rule. GENCO model is very complex problem. Thus, this system transacted the part by several scenario assuming GENCO model.