• 한국정밀공학회지
• /
• 제16권10호
• /
• pp.68-79
• /
• 1999

This paper describes an approach to collaborative design which focuses on the effects of individual activities on the overall design process. We utilize a new process modeling tool to define the process and then analyze and refine the process based on critical paths. This information is then shared over the Internet with all participants. The goal of this system is to detect critical errors at initial design stage and guide the designers to make better decisions based on the knowledge of the overall process. This system enables participating designers to publish his local process through an Internet bulletin board. Other members of the team can then provide feedback based on how the proposed process impacts their activities. The system provides a context-rich, persistent forum for collecting, preserving, and refining corporate expertise of the team. For example, designers can select any process from the bulletin board and use it as a template for his current project and then use it to maintain his own design history. This paper is based on the process modeling concepts of Design Roadamap and describe several key extensions in the area of CPM calculations and collaborative interfaces.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• 제36권5호
• /
• pp.402-407
• /
• 2010

Introduction: The planning of implant surgery is an important factor for the implant prosthesis. Stereolithographic (SLA) surgical stents based on a computer simulation are quite helpful for clinicians to perform the surgery as planned. Although many clinical and technical trials have been performed for computed tomography (CT)-guided implant stents to improve the surgical procedures and prosthetic treatment, there are still many problems to solve. We developed a system of a surgical guide based on 3 dimensional (3D) CT for implant therapy and achieved satisfactory results in the terms of planning and operation. Materials and Methods: Fifteen patients were selected and 30 implant fixtures were installed. The preoperative CT data for surgical planning were prepared after obtaining informed consent. Surgical planning was performed using the simulation program, Ondemend3D In2Guide. The stents were fabricated based on the simulation data containing information of the residual bone, the location of the nerve, and the expected design of the prostheses. After surgery with these customized stents, the accuracy and reproducibility of implant surgery were evaluated based on the computer simulation. The data of postoperative CT were used to confirm this system using the image fusion technique and compare the implant fixtures between the planned and implanted. Results: The mean error was 1.18 (${\pm}0.73$) mm at the occlusal center, 1.23 (${\pm}0.67$) mm at the apical center, and the axis error between the two fixtures was $3.25^{\circ}C$ (${\pm}3.00$). These stents showed superior accuracy in maxilla cases. The lateral side error at the apical center was significantly different from the error at the occlusal center but there were no significant differences between the premolars, 1st molars and 2nd molars. Conclusion: SLA surgical stents based on a computer simulation have the satisfactory accuracy and are expected to be useful for accurate planning and surgery if some errors can be improved.

• 한국신뢰성학회:학술대회논문집
• /
• 한국신뢰성학회 2001년도 정기학술대회
• /
• pp.269-269
• /
• 2001

Maintainability refers to the ease with which maintenance work can be done. It involves the process of ensuring that products can be easily and safely maintained and that the maintenance support requirement is minimized. When a product has a reasonably long life, the cost of operation and support during that life can greatly exceed the initial capital cost. The value to the customer of optimizing maintainability should be evident. Some effort and expense applied to achieving a product which can be easily and cheaply maintained will make very significant savings in the life cycle costs. In this paper, the International Standard IEC 60300-3-10, which is the application guide for maintainability, is considered. This standard can be used to implement a maintainability program covering the initiation, development and in-service phases of a product. It provides guidance on how the maintenance aspects of the tasks should be considered in order to achieve optimum maintainability. The elements of a maintainability program, which are maintenance policy and concept, maintainability studies, project management, design for maintainability, analysis and prediction methods, maintenance verification and validation, analysis of life cycle cost, maintenance support planning, and collection and analysis of maintenance data, are fully discussed in this paper.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• 제40권
• /
• pp.2.1-2.7
• /
• 2018

With the development of computer-aided design/computer-aided manufacturing (CAD/CAM) technology, it has been possible to reconstruct the cranio-maxillofacial defect with more accurate preoperative planning, precise patient-specific implants (PSIs), and shorter operation times. The manufacturing processes include subtractive manufacturing and additive manufacturing and should be selected in consideration of the material type, available technology, post-processing, accuracy, lead time, properties, and surface quality. Materials such as titanium, polyethylene, polyetheretherketone (PEEK), hydroxyapatite (HA), poly-DL-lactic acid (PDLLA), polylactide-co-glycolide acid (PLGA), and calcium phosphate are used. Design methods for the reconstruction of cranio-maxillofacial defects include the use of a pre-operative model printed with pre-operative data, printing a cutting guide or template after virtual surgery, a model after virtual surgery printed with reconstructed data using a mirror image, and manufacturing PSIs by directly obtaining PSI data after reconstruction using a mirror image. By selecting the appropriate design method, manufacturing process, and implant material according to the case, it is possible to obtain a more accurate surgical procedure, reduced operation time, the prevention of various complications that can occur using the traditional method, and predictive results compared to the traditional method.

• 한국CDE학회논문집
• /
• 제20권4호
• /
• pp.348-356
• /
• 2015

It is important to devise methods for assisting dentists to consistently determine implant positions and directions and to accurately perform drilling tasks during dental implant surgery. In this paper, we propose a novel approach to tooth implant placement planning which deals with the determination of the positions and directions of multiple implant fixtures for a set of missing mandibular teeth and suggests the selection of the sizes and types of the implant fixtures. We combine Korean standard data in the sizes and positions of human teeth with the patient specific 3D models of mandibular jawbones, nerve curves, and neighboring teeth around the missing teeth in order to determine the positions and directions of the implant fixtures for the missing teeth. Using the geometric and spatial information of the jawbones, the teeth and the implant fixtures, we can construct the 3D models of surgical guide stents which are crucial to perform drilling tasks with ease and accuracy. Adopted in 3D simulation of dental implant placement, the approach can provide surgeon students with good educational contents. We also expect that, with further work, the approach can be used as a useful tool to plan for dental implant surgery.

• 한국조경학회지
• /
• 제35권4호
• /
• pp.105-118
• /
• 2007

The purpose of this study is not only to compare between 'Opened Landscape' and 'Filtered Landscape' image and preference but also to suggests a guide line of planting design for progressive realization. For this, the image structures of photo-sketch simulation for parallax landscape have been investigated by Semantic Differential scale(S.D. scale) and the Factor analysis. The results could be summarized as follows. The results of S.D. scale values for landscape through parallax were greater than non-parallax landscape. The scenes through parallax were better preferred to direct view. Thus the results of photo-sketch simulation test support the expected hypothesis that the visual environment of complexity and variety is closely correlated with the parallax effect and monotonous or non-parallax environment, and parallax effect on close view more bigger than the distant view. Factors covering the spatial image of parallax landscape were found to be seven and Total values were 60.35 %. The most important factors determining the parallax effect were Factors I 'depth of space' and VI 'expectation of space and interest'. An outstanding view must be handled properly to be preserved or accentuated. In this sense, the parallax spatial beauty with tree could be improved through the visual aspects of plan arrangements and the progressive realization appeared to be one effective design technique for landscape planning and design.

• 디지털산업정보학회논문지
• /
• 제9권1호
• /
• pp.9-23
• /
• 2013

In recent days, there are many researches of wireless LAN services as the communication environment of wireless LAN are so improved that a lot of services are available in wireless environments. The frequency of the wireless LAN is a general resource that can be used to everyone without any permission. Many technologies using this ISM (Industry Science Medical) frequency band are developed fast and widely. But, as many devices use the same frequency band at th same time, the service quality is degraded and the speed of the service rate id degraded by the result of the interference. For overcome this problem, we must provide the new technology of the mobile devices and a new cell design scheme for obtaining maximum throughput that considering the wireless environments effectively. In this paper, we explain the main technology at the IEEE 802.11n environments and proposes the optimal cell design and reference model for gaining maximum performance to many mobile devices at the same time by investigating real environment testing results.

• 대한건축학회논문집:계획계
• /
• 제34권12호
• /
• pp.55-64
• /
• 2018

The purpose of this study is to examine the status and limitations of the activation plan as a result of the change in urban regeneration paradigm. In particular, the change in housing life was considered following the guidelines of the New Deal project. Specifically, the three types - General Neighborhood, Housing Support, and DongneSaligi - were analyzed from the perspective of organization, space and program. In addition, the master plan and unit project, the organization and progress, and the budget plan were reviewed. As a result, the New Deal project for urban regeneration is importance on economic regeneration, which, unlike the integrated and continuous guide proposed by the government, could limit the individual progress of transitional organizations, 2-dimensional planing and various programs. Thus, first, in order to supplement the organization's verticality and inefficiency in progress, the annual business assessment should be discouraged and the permit and progress of the project should be determined at the local government level. Second, integrated and multidimensional planning is necessary to produce synergy effects in the physical environment. Finally, the link between program unit projects and the economic effects can be considered.

• 교육시설
• /
• 제3권1호
• /
• pp.39-52
• /
• 1996

Continuously expanding information technology is changing the world in which our students live. Many schools are using this new technology and many schools are contemplating the use of this new technology. The ways in which teachers and students work, and their dependence on information technology, have evolved significantly-increasing the importance of getting the information technology infrastructure right in schools. Yet, all too often, most of schools are unable to take full advantage of the opportunities that information technology offers since those designing and fitting out school buildings have failed to consider information technology adequately. This study is to guide the physical design of practical networked schools. In this paper, we present the ways to achieve architectural solutions to the manifold problems associated with accommodation of information technology in schools. The practical guidelines for planning and managing information technology infrastructure-that is, the spaces and services provided in the school building to support the user' information technology requirements-are offered. Adherence to these guidelines will provide a substantial degree of adapability and flexibility in school buildings.

• 대한건축학회논문집:계획계
• /
• 제35권6호
• /
• pp.69-80
• /
• 2019

This research focuses on 10 modern museums built in Europe near important cultural assets of UNESCO World Heritage level. This study aims to reveal the coexistence of European laminated history and contemporary architecture by considering various aspects of respecting the existing and maintaining their identity as modern buildings, using these cultural assets as a basic concept of planning while minimizing conflicts with the past. The four measures of respecting existing cultural heritage are arranged by showing respect by lowering oneself, sympathizing with others, preparing for harmony with modernity, and communicating by looking at. The measures that reveal the identity of modern buildings are confirmed by classifying them as modern and post-modern approaches, each with several options. Through this study, we have been able to extract useful lessons for us, as well, while the past and present coexist successfully, by taking history as a reliable guide to take a fresh leap from it, rather than as a solidified remnant of inertness.