• Korean Journal of Food Science and Technology
• /
• v.37 no.6
• /
• pp.889-892
• /
• 2005

Standardized method based on extraction, filtration, and gas chromatography (GC) was developed far propylene glycol analysis to set hygienic norm of safety measure for foods under governmental control. Various columns were tested fur propylene glycol analysis by GC with flame ionization detector. Known amount of propylene glycol was spiked into wheat flour dough and analyzed by developed method. Results showed 101.60% recovery rate for propylene glycol with HP-5 column. Reproducibility test of standards recorded 0.30 for standard variation and 0,42% for relative variation. Using analytical method established, contents of propylene glycol in more than hundred different foods were monitored. Propylene glycol was detected in most foods, indicating propylene glycol is not only commonly added during food preparation, but also is contained naturally in food.

• Journal of Korean Society of Environmental Engineers
• /
• v.27 no.5
• /
• pp.453-460
• /
• 2005

Since late 1970s, water quality monitoring had been performed in Korea by various agencies according to their own needs and objectives. Lacking of consistency in principles, such diverse operation has been producing difficulties in management of information on water quality parameters. These difficulties resulted from the fact that the expansion of monitoring networks had been based not on systematic methodology with considerations on scientifically established planning objectives but on personal experiences and subjective judgments in locating monitoring stations. This study aimed, therefore, to develop a selection methodology for locating monitoring stations to provide various informations on water quality to satisfy various monitoring objectives such as understanding short and long term trends of water quality, monitoring violations to water quality standards, identifying external causes and sources affecting water quality changes, supporting utilization of water resources, examining short-term variations in water quality through a concentrated investigation, estimating pollution loads from each unit watershed, supporting water quality modeling, and establishing informative systems for water resources management. Also, we applied the proposed methodology and presented an improved expansion plan for water quality monitoring networks in the Han River.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.16 no.3
• /
• pp.39-49
• /
• 2017

Standards suitable for local conditions on deciding one-way road are desperately required to solve traffic congestions at the backside roads in the old downtown areas which were not designated as a road by urban planning. Therefore, this study intends to re-establish a standard to decide one-way road which is regarded to be of the greatest effect among traffic system control methods in order to control one-way road system more efficiently. Also, this paper suggests a standard for such decision to improve efficiency of using backside roads and expand designation of one-way road. AHP (analytic hierarchy process) was carried out among the traffic experts to find out the factors to decide one-way road system. Its result reveals that importance of causing accident to walking quantity and traffic was high. 10,000 cases out of all the possible scenarios of accident by combining detailed evaluation items and scales were extracted to draw the outcomes of analyzing the scenarios, which were schematized in a graph. As a result, division by three sections of point of inflection was verified into $1{\leq}$ section A<1.91, 1.9$1{\leq}$ section B<2.08, and $2.08{\leq}$ section C<3. In other words, priority of deciding one-way road should be given to section C, the highest total point, while posterior to section A, where relatively low points are distributed. The standard on deciding one-way road suggested in this paper may be used for designating one-way road and basic data to re-establish the relevant system in the future.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.16 no.2
• /
• pp.75-87
• /
• 2013

This study developed a GIS-based suitability assessment model of coastal zoning system that is needed in the substantial classification of coastal zoning system according to the establishment of law about coastal zoning system. First, this study investigated several kinds of regulations, GIS database and application system related coastal area. Also, grid data model was selected as the GIS analytical model for calculating items of suitability assessment of coastal zoning system. And Grid-based analytical method was suggested for calculating items composing of sea and spatial location characteristics including physical one. Critical values of items were presented using standards that were suggested in coastal regulations and land suitability assessment. Especially, this study presented a calculation method of continuous pattern as fuzzy set function for reflecting the characteristics of GIS data. And this study classified the suitability grade using Z-score and developed model designating coastal zone as conservation management priority, utilization management priority, and planning management priority. This study is judged that very efficient business performance is possible if we consider the spatial coverage of study area and GIS database when the suitability assessment model of coastal zoning system that is suggested in this study, is applied to business works.

• The Journal of Sustainable Design and Educational Environment Research
• /
• v.19 no.2
• /
• pp.41-49
• /
• 2020

Since the 5th Five-Year Plan for the Development of Special Education in 2013, special schools have been trying to improve facility standards to advance special education support. The purpose of this study is to find out the current status of the spatial composition of facilities for public special schools that will be established and planned after 2013, and analyze the differences from the existing school spatial composition to determine the space composition ratio and details required for the establishment of special schools in the future. As a result of the analysis, the total area of facilities of special schools established after 2013 increased by an average of 1,822.1㎡ (about 16%). Through actual drawing analysis, it was confirmed that both the dedicated area and the public area had increased. The cause of the increase in the public area was confirmed to be an increase in hallway width and ramps, halls, and toilet between classrooms, and the reason for the increase in the dedicated area was that the newly installed 'Learning Support Space' had an average of 20 additional rooms installed per school.

• Land and Housing Review
• /
• v.4 no.3
• /
• pp.259-270
• /
• 2013

This paper defined the concept of unsold land and diagnosed the cause of unsold land of LH business site. The results are showing as follows. First, unsold land is defined as land could not be sold until the completion of the project, and plan to sell the unsold land can be changed partially. Second, the status of unsold land in the 226 project sites were analyzed. $146km^2$ area corresponding to 74.8% of the total capital area($195km^2$) are unsold. By purpose, co-residential($38km^2$), industry($21km^2$), exclusive residential($16.4km^2$), commercial business($12.5km^2$), education($10.2km^2$) was larger in order. Third, value enhancement target project sites were selected and its symptoms and the cause of unsold land were analyzed. For the project site over average unsold rate, 6 sites located in province and 2 sites located in capital region were selected through collecting the practitioners and expert opinion. These 8 sites are characterized that sale of land for medium and large co-residential, urban support facilities, block-shaped house and attached house was inactive. Also, these sites commonly experienced economic fluctuations, changes in market demand, supply and demand mismatch, inflexible planning standards.

• Journal of Convergence for Information Technology
• /
• v.11 no.12
• /
• pp.1-13
• /
• 2021

This study tried to suggest ways to improve the indicator system to strengthen the personal information protection. For this purpose, the components of indicator system are derived through domestic and foreign literature, and it was selected as main the diagnostic indicators through FGI/Delphi analysis for personal information protection experts and a survey for personal information protection officers of public institutions. As like this, this study was intended to derive an inspection standard that can be reflected as a separate index system for personal information protection, by classifying the specific IT technologies of the 4th industrial revolution, such as big data, cloud, Internet of Things, and artificial intelligence. As a result, from the planning and design stage of specific technologies, the check items for applying the PbD principle, pseudonymous information processing and de-identification measures were selected as 2 common indicators. And the checklists were consisted 2 items related Big data, 5 items related Cloud service, 5 items related IoT, and 4 items related AI. Accordingly, this study expects to be an institutional device to respond to new technological changes for the continuous development of the personal information management level diagnosis system in the future.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.22 no.4
• /
• pp.338-344
• /
• 2021

Elements that threaten domestic security, such as diplomatic changes in the four major powers surrounding the Korean Peninsula and restrictions on supply and demand of parts due to COVID-19, are constantly increasing. The importance of localizing weapon systems has grown to respond proactively to the threat. As localization is not conducted evenly by the field, it is necessary to change the criteria for selecting localization targets. Establishing standards for selecting targets is difficult due to a lack of research to identify targets. This paper emphasized that the smooth supply of parts from overseas should be examined to identify targets for localization. If suppliers are not distributed evenly in the market, there is a risk of potential supply problems. CRk and HHI, representing the market structure, were proposed as indicators for evaluating the degree of smoothness quantitatively. Among them, CRk is used in Korea to check the market concentration, but there is a limit in the subjectivity of the evaluator, so it cannot be applied without a separate study on the market structure. Therefore, HHI should be applied.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.6
• /
• pp.565-572
• /
• 2019

As a public research institute, government-supported institutes have led the industrial development and the advancement of science and technology in Korea. Robert Levering has annually selected 'Fortune 100 GPTW(Great Place to Work)' by measuring the Trust Index which was originated by himself. The objectives of this study are to attempt newly to analyze the inter-relations among 5 elements of GPTW trust index such as credibility, respect, fairness, camaraderie, and pride perceived by the K institute's 262 employees; to verify that GPTW trust index is valid for the selection of the fortune 100 GPTW. Amart PLS 2.0 and SPSS 18 were utilized for the statistical analysis. The results of this study are as follows. Credibility has positive effect to pride; respect has positive effect to pride and camaraderie; fairness has positive effect to camaraderie; and camaraderie has positive to pride. Pride and camaraderie have positive effect to the perceived GPTW. Recent studies mainly focused on the relations between GPTW trust index as independent, mediating variables or parameters and organizational performances. It is meaningful that this study has firstly tried to analyze the inter-relations among 5 elements of the trust index for the employees of research institute. This study has implication that the in order to enhance the performance the institute has to manage GPTW trust index perceived by the employees.

• Journal of Internet Computing and Services
• /
• v.20 no.5
• /
• pp.113-119
• /
• 2019

The key features of 5G mobile communications recently commercialized can be represented by High Data Rate, Connection Density and Low Latency, of which the features most distinct from the existing 4G will be low Latency, which will be the foundation for various new service offerings. AR and self-driving technologies are being considered as services that utilize these features, and 5G Network Latency is also being discussed in related standards. However, it is true that the discussion of E2E Latency from a service perspective is much lacking. The final goal to achieve low Latency at 5G is to achieve 1ms of air interface based on RTD, which can be done through Ultra-reliable Low Latency Communications (URLLC) through Rel-16 in early 20 years, and further network parity through Mobile Edge Computing (MEC) is also being studied. In addition to 5G network-related factors, the overall 5G E2E Latency also includes link/equipment Latency on the path between the 5G network and the IDC server for service delivery, and the Processing Latency for service processing within the mobile app and server. Meanwhile, it is also necessary to study detailed service requirements by separating Latency for initial setup of service and Latency for continuous service. In this paper, the following three factors were reviewed for initial setup of service. First, the experiment and analysis presented the impact on Latency on the Latency in the case of 1 Data Lake Setup, 2 CRDX On/Off for efficient power, and finally 3H/O on Latency. Through this, we expect Low Latency to contribute to the service requirements and planning associated with Latency in the initial setup of the required services.