• 한국주거학회논문집
• /
• 제28권1호
• /
• pp.109-117
• /
• 2017

It becomes increasingly important to develop sustainable housing to protect environment. The certification system for long-life housing was made to use houses for more than one hundred years in 2014. The long-life housing should be able to meet new demands by change of the population structure; low birthrate, aging and increase of single households. Therefore, it is necessary to suggest a prototype of long-life housing for partial rent. The objective of this study is to suggest a prototype for dividing housing in the long-life validation complex, which has design consideration for dividable house. The construction costs of a prototype for dividing housing is evaluated by comparing with other prototype without regard to dividing housing. The results were as follows: (1) The prototype for diving housing should be added an entrance, bathroom, kitchen for tenant, and above all, maintenance fees for tenant have to be managed seperately from house owner. (2) The equipment system for dividing housing should be designed when planning the space of house. However, design for diving housing should be reflected the unit plan at a minimum on what will and will not happen.

• Asian Pacific Journal of Cancer Prevention
• /
• 제17권4호
• /
• pp.2131-2136
• /
• 2016

Background: Cancer is currently one of the main public health problems all over the world and its economic burden is substantial both for health systems and for society as a whole. To inform priorities for cancer control, we here estimated years of potential life lost (YPLL) and productivity losses due to cancer-related premature mortality in Iran from 2006 to 2010. Materials and Methods: The number of cancer deaths by sex and age groups for top ten leading cancers in Iran were obtained from the Ministry of Health and Medical Education. To estimate the YPLL and the cost of productivity loss due to cancer-related premature mortality, the life expectancy method and the human capital approach were used, respectively. Results: There were 138,228 cancer-related deaths in Iran (without Tehran province) of which 76 % (106,954) were attributable to the top 10 ranked cancers. Some 63 % of total cancer-related deaths were of males. The top 10 ranked cancers resulted in 106,766,942 YPLL in total, 64,171,529 (60 %) in males and 42,595,412 (40%) in females. The estimated YPPLL due to top 10 ranked cancers was 58,581,737 during the period studied of which 32,214,524 (54%) was accounted for in males. The total cost of lost productivity caused by premature deaths because of top 10 cancers was 1.68 billion dollars (US$) from 2006 to 2010, ranging from 251 million dollars in 2006 to 283 million dollars in 2010. Conclusions: This study showed that the economic burden of premature mortality attributable to cancer is significant for Iranian society. The findings provide useful information about the economic impact of cancer for health system policy/decision makers and should facilitate planning of preventive intervention and effective resource allocation.

• 품질경영학회지
• /
• 제44권4호
• /
• pp.785-798
• /
• 2016

Purpose: This paper developed the framework for extracting strategies of research and business development (R&BD) based on the data envelopment analysis(DEA). Methods: DEA has been widely utilized in evaluating R&D efficiency. Even though, technology transfer and commercialization has been regarded as the important factors for practical R&D efficiency evaluation, most research have evaluated R&D efficiency by just using the DEA outputs such as the number of patents and papers. The technology transfer, commercialization and relations among costs and generated technology and commercialization are needed to be considered for more practical R&D efficiency evaluation. Thus, this research addressed a method on how to incorporate the commercialization factors into the R&DB efficiency evaluation, and improve the efficiency strategically in terms of R&D and B&D. To achieve this, this research utilized a two-stage network DEA model for R&BD efficiency evaluation. Results: The proposed framework was applied to the 15 public research institutes and the 34 universities for validation. R&BD efficiency for the 15 public research institutes and the 34 universities was evaluated, and the differentiated improvement strategies for the inefficient DMUs to improve their efficient were proposed. Conclusion: The R&BD efficiency would be effectively analyzed based on two-stage network DEA. It would be utilized for the effective strategy planning for cultivating R&BD.

• 품질경영학회지
• /
• 제44권4호
• /
• pp.713-733
• /
• 2016

Purpose: The primary objective of this case study is to establish a COQ(Cost of Quality) management system for power generation industries. Key topics of this study include collecting COQ elements, their classifications, COQ computation formula, and determining COQ improvement projects. Results: A comprehensive set of COQ elements have been isolated for electric power generation companies. The COQ elements were classified in such a way that they could be managed according to the PAF model as well as the SIPOC diagram. This study showed that a systematic approach could be established for monitoring the COQ elements and using them in the process of improving quality competitiveness. Methods: The PAF(Prevention-Appraisal-Failure) model has been employed in the process of collecting COQ elements for a power generation company. All the cost of quality elements were first examined through an extensive review of articles and books in the field of quality. The cost elements were then refined and augmented by conducting a comparative study with international standards. The COQ elements have been verified by a group of quality managers and classified according to both the PAF model and the SIPOC diagram for better understanding in the entire organization. An improvement strategy has been also proposed by using a typical COQ level of power generation companies. Conclusion: The conventional PAF model was used in establishing a COQ management system for power generation industries. This case study illustrates the procedure about identification, classification and computation of quality costs, including selection of improvement projects. The system can be used not only for observing the current state of cost elements related to quality, but also for planning an improvement strategy using the ratio of cost classification.

• 한국재난정보학회 논문집
• /
• 제8권3호
• /
• pp.267-275
• /
• 2012

본 논문은 한반도에 처음으로 철도가 등장한 이래 검토하지 않았던 국가철도망 계획을 추진한 것이 1998년도로 이를 통하여 새로운 철도시대가 시작되었다. 그 후 반복적인 국가철 도망 계획이 수립되어 국가기간교통망으로 그 역할을 대행하면서 철도의 가치를 제시하고 있다. 그러나 이러한 국가철도망 계획은 예산의 제약 속에서 선구별 그리고 연간 단위당 재원투입 양의 제약, 열차운행의 정합성 등으로 문제가 있으나 시설중심의 계획이 반복되고 있다. 따라서 1998년도에 국가철도망계획이 처음 수립된 이후 수정 등에 새로운 방안 그리고 사회간접자본에 대한 인식의 변화 등으로 고려한 방안의 검토가 필요하다. 따라서 본 논문은 국가철도망 구축에 따른 시간적 변화에 따른 사회간접자본에 대한 시각차이, 국가사회경제적 기반의 변화, 자연재해에 대한 인식의 차이 등의 관점에서 그 변화를 검토하는 것이 그 내용이다.

• 한국병원경영학회지
• /
• 제20권3호
• /
• pp.36-44
• /
• 2015

The Activity Based Costing(ABC) means the process that makes clear how the actions and input resources have changed into service to calculate medical services costs. These days, the number of hospital which is using the ABC system is increasing to make their policy decision making efficient and run the hospitals more resonable. This study analyzes the unbalance in the level of health insurance service fee and the improvement plans based from 8 hospitals(ABC system) and 95 clinics(ABC survey). The cost recovery ratio has shown different levels according to each service type. A surgery service type recorded 76.8% and an evaluation & management service type is 84.6%, a treatment procedure type(85.8%), a function test type(91.6%) and health insurance fee even did not reach to the original cost. Meanwhile, a laboratory test type and imaging test type show high level of cost recovery ratio. they recorded 188.3% and 158.8%. Resultingly now of unbalance in the level of health insurance service fee accelerates supply of every test. so there is a need to make laboratory test type and imaging test type lower to keep balance with the surgery and medical service. These methods should be performed gradually with monitoring the unbalance fee ratio and for this, a panel medical institution have to be established for generalizations of studying result, fairness of selecting researching sample.

• 환경정책연구
• /
• 제5권3호
• /
• pp.79-103
• /
• 2006

본 논문에서는 상수도 수질개선 프로그램을 시행할 계획을 가지고 있는 원주시를 대상으로 하여 상수도 수질개선에 대한 가구의 지불의사액을 분석하고자 한다. 이를 위해 조건부 가치측정 법(CVM)을 적용하되, CVM 연구에서 지 켜 야 할 다양한 지침을 엄격하게 준수하면서 가구조사를 시행하였다. 구체적으로 원주시 250가구를 무작위로 추출하여 일대일 개별면접을 통해 상수도 수질개선 프로그램에 대해 얼마나 지불할 의사가 있는지를 물었다. 응답자들은 전반적으로 조건부 시장을 잘 받아들였으며 가구당 월평균 1,583원에서 2,776원의 지불의사액을 가지고 있는 것으로 분석되었다. 이러한 지불의사는 성별, 교육수준, 소득 등과 같은 가구특성변수에 유의하게 영향을 받았다. 이 값을 원주 전체로 확장하였더니 연간 약 19.9억 원에서 34.9억 원에 해당하였다. 이 값은 상수도 수질개선이 경제적으로 바람직한지 여부를 결정하기 위한 비용-편익 분석에서 편익의 값으로 활용될 수 있을 것이다.

• 산업경영시스템학회지
• /
• 제30권3호
• /
• pp.165-173
• /
• 2007

A space launch vehicle system represents a typical example of large-scale multi-disciplinary systems, consisting of subsystems such as mechanical structure, electronics, control, telecommunication, propulsion, material engineering etc. A lot of cost is required to develop the launch vehicle system. A precise planning of R&D cost is very essential to make a success of the launch vehicle development program. Especially in the early development phase of a new space launch vehicle system, cost estimation techniques and analogy from past similar development data are very useful methods to estimate a development cost of the launch vehicle system. Now Korea Aerospace Research Institute is in charge of the KSLV-I (Korea Space Launch Vehicle-I) Program that is a part of Korea National Space program. KSLV-I Program is a national undertaking to develop launch capabilities to deliver science satellites of a 100kg-class into a low earth orbit. It is hereafter, going to plan to develop a new korean space launch vehicle. In this paper, first the development costs of well-known launch vehicles in the world are presented to provide a reference to make a development plan of a new launch vehicle. Second this paper introduces the present status of cost estimation applications at NASA. Finally this paper presents the results from application of a TRANSCOST, a parametric cost model, to derive a cost estimate of a new launch vehicle development, as an example.

• STI Policy Review
• /
• 제2권3호
• /
• pp.1-12
• /
• 2011

North Korea is now under the pressure of international sanctions due to its nuclear tests, firing of long-range ballistic missiles, the sinking of the ROK naval frigate the Cheonan, and the artillery attack on Yeonpyeong Island that killed four people. To overcome the burden of sanctions North Korea has exerted various efforts to reconstruct its industries. However, it is very unlikely that these reconstruction efforts would produce significant results due to the structural problems of the antiquated infrastructure of North Korean industries. In the future, it is expected that South Korea will have to cooperate with North Korea for the reconstruction of the North Korean economy after the North Korean nuclear issue will be peacefully resolved. South Korean government has to prepare for the reconstruction with careful planning based on analysis of North Korean industries. But, the number of previous studies that have analyzed the technological level of North Korean industries are quite limited. In preparation for the future inter-Korean industrial cooperation, this study tries to analyze the technological level of North Korean industries. The steel industry has been selected as the focus for the main analysis of this study due to the importance of the steel industry as one of key infrastructure industries. Additionally, this study tests the sustainability of the North Korean steel industry by looking into the possibility of whether the North Korean steel industry can sustain or grow while maintaining global competitiveness in the future when the market opens to the world. Such analysis is expected to contribute to the joint prosperity of two Koreas in the short term and the reduction of unification costs in long term.

• 농업과학연구
• /
• 제39권2호
• /
• pp.227-242
• /
• 2012

Accurate estimation of milk production cost is very important for dairy farmers in establishing strategies for business management (e.g. planning a program for milk production, deciding the size of business and investment, determining the milk price for sale). Since the estimated cost of milk production is used as an important index to determine the basal price of milk in Korea, there has been much interest and debate on the method used to estimate milk production cost among the stakeholder. This study was thus carried out to identify problems in the current methodology for estimating cost of milk production, and to find a better way to improve it. We propose several alternatives and better ways to improve the current method for estimating cost of milk production. Estimation of the income and cost per head should be based on the number of cattle converted to grown cows. Cost estimation per liter of milk should be made for both whole milk and 3.4% milk fat corrected milk. The value of purchased cows and raised replacement heifers should be the same as their market value. The productive life span of cows should be less 4 years, and the terminal or salvage value of cows needs to be 30 to 40% less than her initial value. When calculating depreciation of cows over the productive life span, however, the salvage value should be 0 or 1 Korean won. On calculating labor costs, the farm labor wage corresponding to the average wage of nonfarm industrial workers should be assumed. Beside of these, better estimation procedures for other items are also given. The proposed methods from this study should improve the accuracy of estimation of milk production cost and help to achieve consensus among the stakeholder.