• 대한전자공학회논문지TC
• /
• 제37권11호
• /
• pp.1-7
• /
• 2000

Surface wave scattering by periodic grooves of arbitrary profile in a grounded dielectric slab is investigated for the TE surface wave incidence. Both the finite and infinite periodic geometries are considered. The former case is analyzed by using of hybrid FEM/MOM and the latter by using of full MOM procedure. Some numerical results for the reflected and transmitted powers in a grounded dielectric slab, radiation power into the free space, and radiation patterns in case of finite structure and for the dispersion diagram in case of infinite structure are presented. And some descriptions on the relationship between the finite and infinite structure such as the maximum beam angle are given.

• 비파괴검사학회지
• /
• 제21권3호
• /
• pp.277-280
• /
• 2001

General source location method that use an arrival time differences among sensors is restricted to the composite material and the complex-shaped material. In this study, a bundle-type acoustic sensor composed of 6 pinducers was utilized to determine wave propagation direction and then to estimate source location of the unidirectional GFRP. For the purpose of the study, slowness curve for the material was obtained and made an assumption that the incident waves on pinducers are propagated as a plane wave. According to the results, measured propagation directions of the wave were coincide with theoretical background, however, it was a hassle to determine the source location exactly. But, it is expected that bundle-type sensor gives more accurate results for zone location than generally used acoustic sensors.

• 한국조명전기설비학회:학술대회논문집
• /
• 한국조명전기설비학회 1999년도 학술대회논문집-국제 전기방전 및 플라즈마 심포지엄 Proceedings of 1999 KIIEE Annual Conference-International Symposium of Electrical Discharge and Plasma
• /
• pp.141-144
• /
• 1999

This paper offer fundamental ones about insulation diagnosis with electromagnetic wave, when discharges occurred. To simulate Partial-Discharge(PD), It is used needle-plane electrode in air. As the voltages applied, measure the electromagnetic wave with monopole antenna and analysis its fundamental characteristics, then, acquired data were operated. The results presented as the form of graph, and the magnitude of charge when occurred PD simultaneously. In conclusion, when the magnitude of charge over 100[pC], the electric field strength changed, and then the magnitude of charge and the electric field strength increased samely.

• Journal of applied mathematics & informatics
• /
• 제18권1_2호
• /
• pp.171-182
• /
• 2005

An analysis of the non-homogeneous term involved in the free surface condition for second order wave diffraction on a pair of cylinders is presented. In the computations of the nonlinear loads on offshore structures, the most challenging task is the computation of the free surface integral. The main contribution to this integrand is due to the non-homogeneous term present in the free surface condition for second order scattered potential. In this paper, the free surface condition for the second order scattered potential is derived. Under the assumption of large spacing between the two cylinders, waves scattered by one cylinder may be replaced in the vicinity of the other cylinder by equivalent plane waves together with non-planner correction terms. Then solving a complex matrix equation, the first order scattered potential is derived and since the free surface term for second order scattered potential can be expressed in terms of the first order potentials, the free surface term can be obtained using the knowledge of first order potentials only.

• Journal of Mechanical Science and Technology
• /
• 제19권5호
• /
• pp.1116-1122
• /
• 2005

A finite element method was used to simulate the wave propagation of laser-generated ultrasound and its interaction with surface breaking cracks in an elastic material. Thermoelastic laser line source on the material surface was approximated as a shear dipole and loaded as nodal forces in the plane-strain finite element (FE) model. The shear dipole- FE model was tested for the generation of ultrasound on the surface with no defect. The model was found to generate the Rayleigh surface wave. The model was then extended to examine the interaction of laser generated ultrasound with surface-breaking cracks of various depths. The crack-scattered waves were monitored to size the crack depth. The proposed model clearly reproduced the experimentally observed features that can be used to characterize the presence of surface-breaking cracks.

• 제어로봇시스템학회논문지
• /
• 제1권1호
• /
• pp.38-42
• /
• 1995

This paper presents a target scoring method using shock wave signals, which are generated from the supersonic speed of a projectile. The shock wave is detected from three acoustic sensors located in the target plane and the difference of the delay times are measured. The target coordinates are calculated from the effective propagation of velocity (EPV) and the delay times of the shock wave; and the EPV is from the projectile velocity and the delay time. With a comparison between the measurement result and the known coordinates, the accuracy and the usefulness of the proposed scheme is validated.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2002년도 하계종합학술대회 논문집(1)
• /
• pp.455-458
• /
• 2002

Design methods are presented for an X-band traveling-wave slot array realized on a rectangular waveguide. An array of 21 longitudinal slots is realized on the broad wall of a rectangular waveguide. The squint of the antenna main beam is adjusted using the element spacing and the waveguide broad wall dimension. The excitation of the array is controlled by the slot offset from the waveguide center line Multiple I-plane steps are placed around last slot elements so that the second-order beam due to tile reflected wave Is minimized A waveguide-to-coaxial adapter Is designed for feeding the array antenna from a coaxial system. Results of the design show an outstanding performance of the antenna 17.1 dB gain. 36"beam 1111, and -21 dB maximum sidelobe level.evel.

• 한국분말야금학회:학술대회논문집
• /
• 한국분말야금학회 2006년도 Extended Abstracts of 2006 POWDER METALLURGY World Congress Part 1
• /
• pp.374-375
• /
• 2006

Three-dimensional artificial crystals with periodicity corresponding to terahertz wave lengths were fabricated by self-assembling monosized metal spherical particles. The metal crystals were weakly sintered to utilize them as templates. The metal templates were inverted to air spheres crystal embedded in dielectric resin though infiltration and etching. The resulting resin inverted crystals clearly presented the photonic stop gaps within terahertz wave region and the frequencies of the gaps were confirmed to agree well with calculation by plane wave expansion method.

• Bulletin of the Korean Chemical Society
• /
• 제21권12호
• /
• pp.1227-1232
• /
• 2000

Near the conical intersection for the 1,2 $^{2}A'$ states of $H_3$ the derivative coupling vector is calculated and analyzed on the plane of internal coordinates, (U,V) or its polar coordinates $(S{\theta})$, based on the squares of the internuclear distances. It is shown that in the vicinity of the conical intersection the derivative coupling vector behaves like ${\theta}/2S$, which is responsible for the sign changes of the real-valued electronic wave function when the nuclear configuration traverses a closed path enclosing a conical intersection. The analytic property of the wave functions is studied and especially the observation of the sign change in the configuration state function (CSF) coefficients of the real-valued electronic wave functions is demonstrated.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제12권1호
• /
• pp.711-722
• /
• 2020

An optimization framework using genetic algorithms has been developed towards an automated parametric optimization of the Octabuoy semi-submersible design. Compared with deep draft production units, the design of the shallow draught Octabuoy semi-submersible provides a floating system with improved motion characteristics, being less susceptible to vortex induced motions in loop currents. The relatively large water plane area results in a decreased natural heave period, which locates the floater in the wave period range with more wave energy. Considering this, the hull design of Octabuoy semi-submersible has been optimized to improve the floater's motion performance. The optimization has been conducted with optimized parameters of the pontoon's rectangular cross section area, the cone shaped section's height and diameter. Through numerical evaluations of both the 1st-order and 2nd-order hydrodynamics, the optimization through genetic algorithms has been proven to provide improved hydrodynamic performance, in terms of heave and pitch motions. This work presents a meaningful framework as a reference in the process of floating system's design.