• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.47 no.10
• /
• pp.67-73
• /
• 2010

In this paper, the effect of a finite substrate on the mutual coupling of a pair of microstrip patch antennas along the H -plane is investigated. The mutual coupling of a pair of microstrip patch antennas can be reduced using the interference effect due to the phase difference by a variety of routes of the surface wave. In the case of the substrate with $\varepsilon_r$=10 and thickness of 3.2 mm, the mutual coupling is reduced by 4.85 dB on the substrate size with the strong mutual coupling, while the mutual coupling is reduced by 34.28 dB on the substrate size with the weak mutual coupling when the distance between the antenna centers is varied from 0.5 $\lambda_0$ to 1.0 $\lambda_0$. In the case of optimization substrate size, the decreasing rate of the mutual coupling with the increase of the distance between the antenna centers is very large. Good agreements between the image method and full wave simulation results are obtained.

• Journal of KIISE:Databases
• /
• v.31 no.3
• /
• pp.331-339
• /
• 2004

XML has got to be a new standard for data representation and exchanging by its many good points, and the core part of many new researches and emerging technologies. However, the self-describing characteristic, which is one of XML's good points, caused the spreading of XML documents with different structures, and so the need of the research for the effective XML-document search has been proposed. This paper is for the analysis of the problem in BitCube, which is a bitmap indexing that shows high performance grounded on its fast retrieval. In addition, to resolve the problem of BitCube, we did design and implement xPlaneb(XML Plane Web) which it a new 3-dimensional bitmap indexing made of linked lists. We propose an effective information retrieval technique by replacing BitCube operations with new ones and reconstructing 3-dimensional array index of BitCube with effective nodes. Performance evaluation shows that the proposed technique is better than BitCube, as the amount of document increases, in terms of memory consumptions and operation speed.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.23 no.3
• /
• pp.306-313
• /
• 2012

In order to enhance the isolation level between two dual-band E-slot microstrip patch antennas, EBG structure which operates in UMTS Tx(1.92~1.98 GHz) and Rx(2.11~2.17 GHz) band is proposed. The proposed EBG structure made with a periodic array of two different size EBG unit cells which has a modified mushroom-type for isolation improvement between two antennas. They do not share a common ground plane of the microstrip patch antenna. Overall size of the fabricated antenna is $210.5mm{\times}117mm$. The two different EBG unit cell sizes are $15.6mm{\times}4mm$ and $17.4mm{\times}4mm$, respectively. It was etched on the FR-4 substrate(thickness=3.93 mm, ${\varepsilon}_r$=4.6). The experiment results show that the isolation level between antennas in Tx/Rx band were improved by about 9 dB and 12 dB, respectively, through the use of the proposed EBG structure.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.11 no.5
• /
• pp.991-996
• /
• 2007

Recently, a computational reconstruction method using an integral imaging technique, which is a promise three-dimensional display technique, has been actively researched. This method is that 3-D images can be digitally reconstructed at the required output planes by superposition of all of the inversely enlarged elemental images by using a hypothetical pinhole array model. However, the conventional method mostly yields reconstructed images having a low-resolution, because there are some intensity irregularities with a grid structure at the reconstructed mage plane by using square-type elemental images. In this paper, to overcome this problem, we propose a novel computational integral imaging reconstruction (CIIR) method using round-type mapping model. Proposed CIIR method can overcome problems of non-uniformly reconstructed images caused from the conventional method and improve the resolution of 3-D images. To show the usefulness of the proposed method, both computational experiment and optical experiment are carried out and their results are presented.

• Journal of Biomedical Engineering Research
• /
• v.23 no.3
• /
• pp.243-251
• /
• 2002

Synthetic zinc wave employs Pulsed plane wave as transmit beam with linear time delay curve. The received echoes in different transmit directions at different transmit times are superposed at imaging Points with Proper time delay compensation using synthetic focusing scheme. This scheme. which uses full aperture in transmit, obtains a high SNR image, and also features high lateral resolution by using two way dynamic focusing at all imaging depths. In this Paper, we consider the Problems in realization of synthetic zinc wave. Also. we have applied the scheme to obtain phantom and in-vivo images using a linear array of 5 MHz. In phantom test. experimental images show high resolution over a more extended imaging depth than conventional fixed Point transmit and receive dynamic focusing schemes In-vivo images show that the resolution could not overcome conventional focusing systems because of motion blurring and(or) aberration of tissue. but the frame rate tan be increased by a factor of more than 5 compared to conventional focusing schemes. with competitive resolution at all imaging depths .

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.8 no.1
• /
• pp.13-21
• /
• 1997

In this paper, the oscillator type active antenna used as an element of active phased array antenna is designed and fabricated using slot coupling. The radiating element and active circuit are fabricated on each layer respectively and coupled electromagnetically through slot on the ground plane. This structure can solve the problems such as narrow bandwidth of microstrip antenna, spurious radiation by active circuits, and spaces for integration of the feeding circuits which are caused by integrating antennas with oscillator circuits in the same layer. The active antenna in this paper, the oscillation frequency can be tuned linearly by controlling the drain bias voltage of FET. The frequency tuning range is between 12.37 GHz to 12.65 GHz when bias voltage is varied from 3V to 9V, thus frequency tuning bandwidth is 280 MHz (2.24%). The output power of antenna is uniform within 5dB over frequency tuning range. Therefore this active antenna can be used as an element of linear or planar active phased array antennas.

• Applied Biological Chemistry
• /
• v.47 no.3
• /
• pp.300-306
• /
• 2004

Eight cation or anion-responsive polymer membranes were prepared by a casting procedure employing polyvinyl chloride, Bis (2-ethylhexyl)sebacate and each electroactive material in the ratio of 66 : 33 : 1. The resulting membranes were separately installed onto the sensitive area of the ionic electrodes to produce an 8-channel taste sensor array. The taste sensors of the array were connected to a high-input impedance amplifier and the amplified sensor signals were interfaced to a PC via an A/D converter. The taste evaluation system was applied to a discriminant analysis on six groups of marketed beverages like sikhye, sujunggwa, tangerine juice, ume juice, ionic drink and green tea. When the signal data from the sensor array were analyzed by principal component analysis after normalization, the 1st, 2nd and 3rd principal component explained most of the total data variance. The six groups of the analyzed beverages were discriminated well in the three dimensional principal component space. The half of the five groups of the analyzed beverages was also discriminated in the two dimensional principal component plane.

• Journal of Mechanical Science and Technology
• /
• v.15 no.12
• /
• pp.1741-1749
• /
• 2001

Recent studies of the structure of wall turbulence have lead to the development of a conceptual model that validates and integrates many elements of previous models into a relatively simple picture based on self-assembling packets of hairpin vortex eddies. By continual spawning new hairpins the packets grow longer in the streamwise direction, and by mutual induction between adjacent hairpins the hairpins are strained so that they grow taller and wider as they age. The result is a characteristic growth angle in the streamwise-wall normal plane. The spanwise growth of individual packets implies that packets must either merge or pass through each other when they come into contact. Direct numerical simulations of the growth and interaction of spanwise adjacent hairpins shows that they merge by the vortex connection mechanism originally proposed by Wark and Nagib (199). In this mechanism the quasi-streamwise legs of two hairpins annihilate each other, by virtue of having opposite vorticity, leaving a new hairpin of approximately double the width of the individuals. PIV measurements in planes parallel to the wall support this picture. DNS of multiple hairpins shows how the spanwise scale doubles when the hairpins form an array.

• Journal of the Optical Society of Korea
• /
• v.20 no.3
• /
• pp.381-388
• /
• 2016

The performance of a staring infrared imaging system can be characterized based on estimating the modulation transfer function (MTF). The slant edge method is a widely used MTF estimation method, which can effectively solve the aliasing problem caused by the discrete undersampling of the infrared focal plane array. However, the traditional slant edge method has some limitations such as the low precision of the edge angle extraction and using the approximate function to fit the edge spread function (ESF), which affects the accuracy of the MTF estimation. In this paper, we propose a modified slant edge method, including an edge angle extraction method that can improve the precision of the edge angle extraction and an ESF fitting algorithm which is based on the transfer function model of the imaging system, to enhance the accuracy of the MTF estimation. This modified slant edge method presents higher estimation accuracy and better immunity to noise and edge angle than other traditional methods, which is demonstrated by the simulation and application experiments operated in our study.

• Journal of Powder Materials
• /
• v.6 no.4
• /
• pp.307-313
• /
• 1999

The effect of carbon content on the shape of WC grains dispersed in the Co-rich matrix during liquid phase sintering of WC-35%Co hard metals has been determined. The shape of WC grains was observed using SEM stereography after removing cobalt matrix with boiling hydrochloric acid solution. The WC grains changed from hexagonal to trigonal prism as the carbon content increased in the two-phase region of(WC + $\beta$ - Co), while the morphology of WC grains changed from trigonal to hexagonal shape as the carbon content decreased. The morphology of WC grains changes reversibly along with carbon loss or carbon pick-up. Morphology change of WC grains is attributed to crystal structure of WC, which has an asymmetric array of carbon atoms. There are two types of prismatic planes having different numbers of broken W-C bonds in WC grains. It is scrutinized that as the carbon content increases, the high energy prism planes grow fast and the crystals change from hexagonal to trigonal shape. On the other hand, when the carbon content decreases, the high energy prism planes are dissolved accompanying split of (100) plane into (101) and (101) planes.