• Journal of Digital Convergence
• /
• v.14 no.4
• /
• pp.419-424
• /
• 2016

In this paper, we studied a light distribution for the LED chips arrangement using an optical design software. The structures of the edge type LED luminaires are reflector plane, LGP(lighting guide plane) and diffuse plane. The reflector plane is on the middle of the overall structure. We had simulation that placing LED chips on the reflector center of the reflector edge by changing the position of LED chips above the reflector center at 1mm, 2mm, and 3mm respectively. In the case, when LED chips are on the center of the reflector, it shows the light distribution of the general diffuse illumination, the semi-direct distribution with 0.56 efficiency and the direct distribution with 0.31 efficiency. And the wedge type LGP shows more efficiency than the flat type. Gradually increasing shape of semi-spherical type by 0.015mm has power of 1.02W, efficiency of 0.25, and maximum luminous intensity of 0.104W/sr, it also and shows the better optical characteristics than the reflector plane that have no patterns. This semi-spherical type shows the better optical characteristics than the reflector plane that have no patterns.

• Journal of The Korean Astronomical Society
• /
• v.38 no.2
• /
• pp.219-222
• /
• 2005

We present the high-resolution (2"-4") images of the molecular envelopes surrounding the evolved stars, V Hya, VY CMa, and ${\pi}^1$ Gru observed with the Submillimeter Array. The CO J=2-1 and 3-2 images of the carbon star V Hya show that the circumstellar structure of this star consists of three kinematic components; there is a flattened disk-like envelope that is expanding with a velocity of ${\~}16 km\;s^{-1}$, the second component is the medium-velocity wind having a deprojected velocity of 40-120 km $s^{-l}$ moving along the disk plane, and the third one is the bipolar molecular jet having an extreme velocity of 70-185 km $s^{-l}$. The axis of this high velocity jet is perpendicular to the plane of the disk-like envelope. We found that the circumstellar structure of the S-star ${\pi}^1$ Gru traced by the CO J =2-1 resembles that of V Hya quite closely; the star is surrounded by the expanding disk-like envelope and is driving the medium-velocity wind along the disk plane. We also obtained the excellent images of VY CMa with the CO and $^{13}CO$ J=2-1 and $SO\;6_5-5_4$ lines. The maps of three molecular lines show that the envelope has a significant velocity gradient in the east-west direction, suggesting that the envelope surrounding VY CMa is also flattened and expanding along its radial direction. The high-resolution images obtained with the SMA show that some AGB stars are associated with the asymmetric mass loss including the equatorial wind and bipolar jet.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.19 no.10
• /
• pp.2043-2052
• /
• 1994

This paper proposes a new parallel ASIC architecture for real-time image processing to reduce inter-processing element (inter-PE) communication overhead, called a Sliding Memory Plane (SliM) Image Processor. The Slim Image Processor consists of $3\times3$ processing elements (PEs) connected by a mesh topology. With easy scalability due to the topology. a set of SliM Image Processors can form a mesh-connected SIMD parallel architecture. called the SliM Array Processor. The idea of sliding means that all pixels are slided into all neighboring PEs without interrupting PEs and without a coprocessor or a DMA controller. Since the inter-PE communication and computation occur simultaneously. the inter-PE communication overhead, significant disadvantage of existing machines greatly diminishes. Two I/O planes provide a buffering capability and reduce the date I/O overhead. In addition, using the by-passing path provides eight-way connectivity even with four links. with these salient features. SliM shows a significant performance improvement. This paper presents architectures of a PE and the SliM Image Processor, and describes the design of an instruction set.

• Proceedings of the KSRS Conference
• /
• 2007.10a
• /
• pp.365-368
• /
• 2007

Millimeter-wave (MMW) imaging radiometer systems have an attractive advantage to obtain an image through low visibility weather conditions such as fog, clouds and light rain compared with visible and infrared imaging systems. Many countries have developed a various kinds of MMW imaging radiometers for the aim of low cost and high performance. In Korea, Millimeter-wave Imaging RAdiometer Equipment (MIRAE) has been developed since the end of 2006. Recently the development of some modules was finished for the test model. This paper describes the design and development of the MIRAE. In addition, the test results of its manufactured modules are presented.

• Nuclear Engineering and Technology
• /
• v.49 no.6
• /
• pp.1354-1357
• /
• 2017

Characterization of special nuclear material may be performed using energy spectroscopy of either the neutron or gamma-ray emissions from the sample. Gamma-ray spectroscopy can be performed relatively easily using high-resolution semiconductors such as high-purity germanium. Neutron spectroscopy, by contrast, is a complex inverse problem. Here, results are presented for $^{252}Cf$ and PuBe energy spectra unfolded using a single EJ309 organic scintillator; excellent agreement is observed with the reference spectra. Neutron energy spectroscopy is also possible using a two-plane detector array, whereby time-of-flight kinematics can be used. With this system, energy spectra can also be obtained as a function of position. Spatial-dependent energy spectra are presented for neutron and gamma-ray sources that are in excellent agreement with expectations.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.7 no.4 s.19
• /
• pp.79-86
• /
• 2004

This paper has presented to the design results of the analog and digital signal processor for the 2nd generation thermal imaging system using $480\times6$ infrared focal plane array In order to correct non-uniformities of detector arrays, we have developed the 2-point correction method using the thermo electric cooler. Additionally, to enhance the image of low contrast and improve the detection capability, we developed the new technique of histogram processing being suitable for the characteristics of contrast distribution of thermal imagery. Through these image processing techniques, we obtained a high qualify thermal image and acquired good result.

• Bulletin of the Korean Space Science Society
• /
• 2008.10a
• /
• pp.36.3-36.3
• /
• 2008

KARI (Korea Aerospace Research Institute) is going to launch a Communication, Ocean and Meteorological Satellite (COMS) at summer of 2009. It will be first thing to be developed for a geostationary satellite through domestic technology. Of course, KARI has performed this development program with EADS Astrium in France since 2005. COMS has the non-symmetric configuration that the solar array is only attached on the south panel. Due to the configuration, momentum of satellite will be rapidly accumulated induced by solar pressure and then 3 wheels of large momentum are located on roll-yaw plane for attitude control. Therefore, to prevent the saturation of wheel momentum, wheel off-loading will be performed two times per day during 10 minutes for each one. At the moment, translation movement on 3-axes direction appears because of using thrusters. In this paper, strategy of the wheel off-loading and triaxiality which is the translation effect on 3-axes are introduced. Consequently, the result of optimized triaxiality considering the wheel off-loading strategy is summarized.

• International Journal of Precision Engineering and Manufacturing
• /
• v.3 no.1
• /
• pp.49-56
• /
• 2002

The Z-map is a special farm of discrete non-parametric representation in which the height values at grid points on the xy-plane are stored as a 2D array z[ij]. While the z-map is the simplest farm of representing sculptured surfaces and is the most versatile scheme for modeling non-parametric objects, its practical application in industry (eg, tool-path generation) has aroused much controversy over its weaknesses, namely its inaccuracy, singularity (eg, vertical wall), and some excessive storage needs. Much research or the application of the z-map can be found in various articles, however, research on the systematic analysis of sculptured surface shape representation via the z-map model is rather rare. Presented in this paper are the following: shape modeling power of the simple z-map model, exact (within tolerance) z-map representation of sculptured surfaces which have some feature-shapes such as vertical-walls and real sharp-edges by adopting some complementary z-map models, and some application examples.

• Journal of electromagnetic engineering and science
• /
• v.13 no.4
• /
• pp.240-244
• /
• 2013

In this paper, we present an improvement of a closed-form formula for mutual impedance computation. Depending on the center-to-center spacing between two rectangular microstrip patch antennas, the mutual impedance formula is separated into two parts. The formula based on synthetic asymptote and variable separation is utilized for spacings of more than 0.5 ${\lambda}_0$. When the spacing is less than 0.5 ${\lambda}_0$, an approximate formula is proposed to improve the computation for closely spaced elements. Simulation results are compared to computational results of mutual impedances and mutual coupling coefficients as functions of normalized center-to-center spacing in both E- and H-plane coupling configurations. A good agreement between simulation and computation is achieved.

• Journal of Korean Institute of Industrial Engineers
• /
• v.26 no.4
• /
• pp.325-335
• /
• 2000

Gouge-free tool-path generation is an important issue in mold & die machining and researches on cutter interference avoidance can be found in many articles. One of the various methods is construction of tool-offset surface of cutter-location (CL) surface on which the cutter-center point (CL-point) locates. Provided that the CL surface is represented in a suitable form, cutter-interference avoidance can be performed without the burden of computing CL data for every cutter-contact (CC) point. In the paper, various methods of constructing a CL surface in the z-map form are presented, where z-map is a special form of discrete nonparametric representation in which the height values at grid points on the xy-plane are stored as a 2D array z[i,j].