• 제목/요약/키워드: Plane of array

검색결과 385건 처리시간 0.027초

음향 홀로그래피를 이용한 자동차 바람소리 성능개발 (AEROACOUSTIC NOISE REDUCTION OF AN AUTOMOBILE USING ACOUSTIC HOLOGRAPHY)

  • 김무상;남경욱
    • 유체기계공업학회:학술대회논문집
    • /
    • 유체기계공업학회 2006년 제4회 한국유체공학학술대회 논문집
    • /
    • pp.259-262
    • /
    • 2006
  • This paper introduces the process of reducing the automobile wind noise by using acoustic holography. First, a microphone array scans a side or plane under an automible step-by-step. Second, a pressure on a source plane is calculated. Third process is to analyze how much individual sources contribute to interior noise. Fourth process is to control important noise sources determined by the contribution analysis. This paper deals with the entire process, theoretical and experimental problems.

  • PDF

선형 위상배열 급전기에서 저부엽 모노펄스 패턴을 얻기 위한 다중모드 E-면 주름혼의 설계 (Design of multimode E-plane corugated monopulse horn for linear phased array feeder)

  • 김찬홍;이용희;홍동희
    • 전자공학회논문지A
    • /
    • 제33A권11호
    • /
    • pp.52-59
    • /
    • 1996
  • This paper presents a monopulse feed structure with low sidelobe monopulse pattern, which consists of a E-plane corrugated horn and a unfiorm pick-up aperture power divider. Tfhe design methods and epxerimental resutls of the E-plane corrugated feeder are described. Modified hybrid mode analysis and GSM (generalized scattering matrix) methods are introduced to design the E-plane corrugated feed horns. The 24-port corrugated feeder is designed using modified hybrid mode analysis initially and verified using GSM methods. Measurement results show that this feeder has low return loss and sidelobe level at sum and difference channel, respectively.

  • PDF

구형 방사 패턴을 갖는 평면 배열 안테나 설계에 대한 연구 (A Study on a Planar Array Antenna Design with a Flat-Topped Radiation Pattern)

  • 엄순영;표철식;전순익;김창주
    • 한국전자파학회논문지
    • /
    • 제15권9호
    • /
    • pp.896-905
    • /
    • 2004
  • 본 논문에서는 이동통신 기지국 안테나로 활용하기 위한 구형 빔 패턴을 갖는 평면 배열 안테나 설계 및 제작 그리고 실험에 대하여 기술하였다. 원하는 구형 빔 패턴을 형성하기 위해 종래에 많이 사용하던 sin(x)/x 전류 분포를 사용하지 않고 급전 회로망의 설계 제작이 용이한 진폭과 위상 성분의 전류 분포로 최적화하였다. 본 논문에서 설계하는 평면 배열 안테나는 직사각형 격자 배열 구조를 가지며, 16${\times}$8 배열 소자로 구성된다. 각 방사 소자는 선형 수직 편파와 동축 여기 구조를 갖는 단일 마이크로스트립 소자이며, 월킨슨 전력 분배기와 180$^{\circ}$ 링 하이브리드 결합기를 기본 소자로 하는 급전 회로망이 설계된다. 평면 배열 안테나는 방위각 방향으로 는 0.55 λ$_{ο}$의 소자 간격을 갖는 16 배열 소자에 의해 90$^{\circ}$ 구형 빔 패턴을 형성하고, 양각 방향으로는 0.65 λ$_{ο}$의 소자 간격을 갖는 8 배열 소자에 의해 $10^{\circ}$의 일반적인 정형 빔 패턴을 형성한다. 또한, 16${\times}$8 배열 안테나는 좌우 상하 대칭적으로 네 부분으로 나뉘어져 있으며, 128개의 방사 소자, 32개의 1-4 행 분배기, 4개의 1-8 열 분배기 그리고 1개의 1-4 입력 전력 분배기로 구성된다. 본 논문에서 제안한 평면 배열 안테나 구조의 전기적인 특성을 검증하기 위하여 1.92~2.17 GHz(IMT2000 대역)에서 동작하는 평면 배열 안테나 실험 시제품을 제작하였으며, 실험 측정 성능들은 시뮬레이션 성능들과 매우 유사함을 보여 주었다.

50 kHz 체장어군탐지기용 분할 빔 음향 변환기의 개발 (Development of Split-beam Acoustic Transducer for a 50 kHz Fish Sizing Echo Sounder)

  • 이대재;이원섭
    • 한국수산과학회지
    • /
    • 제44권4호
    • /
    • pp.413-422
    • /
    • 2011
  • An improved split-beam transducer for a 50 kHz fish-sizing echo sounder was developed. The main objective of this study was to minimize the side lobe level in the beam pattern and the distance between acoustic centers for adjacent transducer quadrants in the geometrical arrangement of array elements while maintaining a given number of transducer elements and beam width. To achieve these goals, a 32-element planar array transducer ($6{\times}6$ array with one element in each corner missing) was designed using the Dolph-Chebyshev shading function to suppress side lobes in the array beam pattern and fabricated by arranging the inter-element spacing to be substantially equal to half the wavelength using the transducer element of 0.4 times the wavelength in diameter. The performance characteristics of this split-beam transducer were evaluated in the experimental water tank of $5m{\times}5m{\times}6m$ (length${\times}$height${\times}$width). In this study, the design goal of the beam width and side lobe level for transmitting a beam pattern was initially set at $21^{\circ}$ and -30 dB, respectively. However, the measured beam width at 3 dB was $21^{\circ}$ in both directions with side lobe levels of -24.7 dB in the horizontal plane and -25.6 dB in the vertical plane. The averaged beam width at -3 dB of the receiving beam patterns for four receiving quadrants was $31.4^{\circ}$. The transmitting voltage response was 161.5 dB (re $1{\mu}Pa$/V at 1 m) at 50.23 kHz with a bandwidth of 2.16 kHz, and the averaged receiving sensitivity for four receiving quadrants was -178.13 dB (re 1 V/${\mu}Pa$) at 49.8 kHz with a bandwidth of 2.64 kHz.

X밴드용 다이폴 급전 평면배열 안테나 설계 및 제작 (Design and Fabrication of the Dipole-Fed Planar Array Antenna at X-Band)

  • 문성익;양두영
    • 대한전자공학회논문지TC
    • /
    • 제39권5호
    • /
    • pp.251-258
    • /
    • 2002
  • 본 논문에서는 기존외 야기-우다 안테나 배열이론을 마이크로스트립 안테나에 접목시킨 X밴드용 다이폴 급전 평면배열 안테나를 설계하고 제작하였다. 그리고 넓은 대역폭을 갖는 무선통신 시스팀에 쉽게 적용시킬수 있는 다이폴 급전 평면배열 안테나의 설계 절차에 대하여 기술하였다. 또한 FDTD 수치해석법을 이용하여 안테나의 복사특성, 반사손실과 대역폭을 개선시켰으며 제작을 통해 평면형 안테나 해석의 타당성을 입증하였다. 제작한 결과, 10GHz의 중심주파수에서 안테나의 이득은 4.9dBi이고 대역폭은 약 40%, 전후방비는 16dB, E면과 H면의 반 전력 빔폭은 각각 117°와 156°이다. VSWR<2를 기준으로 했을 때, 7.4GHz∼11.88GHZ의 주파수 범위에서 측정결과와 이론적인 결과가 비교적 잘 일치하였다.

Mechanical design of mounts for IGRINS focal plane array

  • Oh, Jae Sok;Park, Chan;Cha, Sang-Mok;Yuk, In-Soo;Park, Kwijong;Kim, Kang-Min;Chun, Moo-Young;Ko, Kyeongyeon;Oh, Heeyoung;Jeong, Ueejeong;Nah, Jakyuong;Lee, Hanshin;Pavel, Michael;Jaffe, Daniel T.
    • 천문학회보
    • /
    • 제39권1호
    • /
    • pp.53.2-53.2
    • /
    • 2014
  • IGRINS, the Immersion GRating INfrared Spectrometer, is a near-infrared wide-band high-resolution spectrograph jointly developed by the Korea Astronomy and Space Science Institute and the University of Texas at Austin. IGRINS employs three HAWAII-2RG focal plane array (FPA) detectors. The mechanical mounts for these detectors serves a critical function in the overall instrument design: Optically, they permit the only positional compensation in the otherwise "build to print" design. Thermally, they permit setting and control of the detector operating temperature independently of the cryostat bench. We present the design and fabrication of the mechanical mount as a single module. The detector mount includes the array housing, a housing for the SIDECAR ASIC, a field flattener lens holder, and a support base. The detector and ASIC housing will be kept at 65 K and the support base at 130 K. G10 supports thermally isolate the detector and ASIC housing from the support base. The field flattening lens holder attaches directly to the FPA array housing and holds the lens with a six-point kinematic mount. Fine adjustment features permit changes in axial position and in yaw and pitch angles. We optimized the structural stability and thermal characteristics of the mount design using computer-aided 3D modeling and finite element analysis. Based on the computer simulation, the designed detector mount meets the optical and thermal requirements very well.

  • PDF

개방형 도파관 배열 안테나의 조향 소자 패턴 및 조향 임피던스에 관한 연구 (Scan Element Pattern and Scan Impedance of Open-Ended Waveguide Away Antenna)

  • 유제우;라동균;김동석;김찬홍;박동철
    • 한국전자파학회논문지
    • /
    • 제18권1호
    • /
    • pp.7-14
    • /
    • 2007
  • 본 논문에서는 직사각형 개방형 도파관들이 삼각 격자 형태로 배열된 구조의 조향 특성을 연구하였다. 무한배열 해석 이론에서의 도파관 모드와 플로케 모드 함수를 이용하여 도파관 내부와 외부의 전계 성분을 적분방정식으로 유도하고 이를 프로그램화하여 조향 소자 패턴과 조향 임피던스를 수치해석하였다. CST사의 MWS(Microwave Studio)와 Ansoft사의 HFSS(High Frequency Structure Simulator)를 이용하여 얻어진 시뮬레이션 결과와 계산된 결과를 비교하였고, 아울러 $8{\times}8$ 부배열을 제작하고 측정하여 시뮬레이션과 계산 결과와 비교함으로써 접근 방법의 타당성을 검증하였다. 제작된 부배열 안테나는 X-대역에 있는 중심주파수의 10.5 % 대역 내에서 E-면(방위각)과 H-면(고각) 조향 범위 ${\pm}45^{\circ}C,\;{\pm}20^{\circ}C$ 내에서 평탄한 이득을 갖고 또한 -10 dB 이하의 반사 손실을 갖는 것을 확인하였다.

복합 빔 패턴 형성을 위한 원통형 하이브리드 안테나 (A Cylindrical Hybrid Antenna for Shaping Complex Beam Patterns)

  • 엄순영;정영배;전순익;김창주
    • 한국전자파학회논문지
    • /
    • 제18권11호
    • /
    • pp.1279-1290
    • /
    • 2007
  • 본 논문에서는 복합 빔 패턴들을 형성하기 위해 오프셋 선형 급전 배열에 의해 공간 급전되는 원통형 하이브리드 안테나에 대하여 기술한다. 선형 급전 배열은 12개의 마이크로스트립 패치 소자들로 구성되며, 수평면에서 $90^{\circ}$의 구형 빔 패턴을 형성한다. 그리고, 수직면에서 $-5^{\circ}{\sim}-25^{\circ}$ 범위에 걸쳐 코씨컨트 빔 패턴을 형성하기 위해 선형 급전 배열에 의해 원통형 반사판상의 수직 곡선이 성형화 된다. IMT-2000 서비스 대역에서 동작하는 $140{\times}50\;cm$ 크기의 원통형 반사판 개구면을 갖는 하이브리드 안테나 시제품을 설계 및 제작하였으며, 또한 안테나의 전기적 성능들을 측정하고 그 결과들을 분석하였다.

Design of Microstrip Antenna for Satellite Navigation System Jamming

  • Shin, Jae Yoon;Park, Chong Hwan;Woo, Jong Myung
    • Journal of Positioning, Navigation, and Timing
    • /
    • 제7권1호
    • /
    • pp.37-42
    • /
    • 2018
  • This paper proposed a microstrip antenna that can perform jamming of satellite signals from the GPS L5, GLONASS G3, BDS B2 frequency bands (1164 - 1217 MHz) that are employed mainly for military purposes among the GNSS frequencies using unmanned aircrafts over the enemy's sky in time of emergency. The single element in the proposed antenna can be easily mounted to unmanned aircrafts. This study analyzed the characteristics of miniaturization and beam of radiating elements by applying the image theories and perturbation effect to satisfy the uniform level at ${\pm}45^{\circ}$ of beam steering goal due to the phase delay after antenna array. The designed microstrip antenna had a miniaturized radiating element area (x-y plane), which was reduced by 76.3% compared to that of basic microstrip antenna, and its beam width was $190^{\circ}$ in the E-plane and $140^{\circ}$ in the H plane. In addition, the simulation was conducted to determine the characteristics due to the phase delay by arranging the designed single microstrip antenna by $1{\times}4$ array and the results showed that beam steering of ${\pm}45^{\circ}$ is possible in the H-plane on the basis of $0^{\circ}$. Thus, the proposed antenna was verified to be effective in satellite signal jamming in the air as it was attached to the lower end of unmanned aircrafts.

수열합성에 의한 c축 배향 ZnO 나노로드 배열의 성장과 구조, 광학적 특성 (Growth, Structural and Optical Properties of c-axis Oriented ZnO Nanorods Array by Hydrothermal Method)

  • 김경범;김창일;정영훈;이영진;백종후
    • 한국전기전자재료학회논문지
    • /
    • 제23권3호
    • /
    • pp.222-227
    • /
    • 2010
  • ZnO nanorods array have been grown on the seed crystal coated Si(100) substrate by hydrothermal method. The growth, structural and optical properties of ZnO nanorods array were investigated with a variation of precursor concentration from 0.01 M to 0.04 M. The array density of grown ZnO nanorods per same area was increased with increasing the concentration of precursor solution. Vertically aligned ZnO nanorods with hexagonal wurtzite structure have highly preferred c-axis orientation along (002) lattice plane. Especially, ZnO nanorods array developed from 0.04 M precursor solution showed a diameter of about 85 nm and length of 1.2 {\mu}m$ without any crystallographic defects. The photoluminescence spectra of ZnO nanorods from heavier precursor concentration exhibited stronger UV emission around 380 nm corresponding with near-band-edge emission.