• 한국강구조학회 논문집
• /
• 제23권4호
• /
• pp.429-438
• /
• 2011

본 연구에서는 스트라치 시스템의 긴장설치과정 및 극한하중 해석을 수행하기 위한 명시적 해석법을 제안하였다. 스트라치 시스템은 Stressed-Arch에서 유래한 용어로 슬리브와 갭이 도입된 유동하현재 내부의 긴장재에 초기장력을 도입함으로써 갭이 점차 닫히게 되며, 이에 따라 상현재에 곡률이 도입되면서 전체 구조물이 상승하여, 최종적인 아치형태의 구조물을 형성하는 독창적인 구조시스템이다. 스트라치 시스템의 초기장력 도입과정을 긴장설치(stress-erection) 과정이라 하며, 초기곡률의 도입에 따라 유동 상현재에는 과도한 초기변형이 발생하여 소성거동에 의한 강체회전이 발생하는 불안정 구조물이 된다. 본 연구에서는 이러한 스트라치 시스템의 불안정 거동특성을 해석하기 위해서 강성행렬을 사용하지 않는 명시적 동적이완법을 사용하여 비선형 평형방정식의 해를 구하였고, 대변위 및 단면의 재료적 특성을 반영할 수 있는 필라맨트 보요소를 사용하여 연속된 상현재의 비선형 거동특성을 분석하였다. 필라맨트 보요소의 단면은 다수의 1차원 필라맨트로 구성되며, 각각의 필라맨트에 대해서 다양한 재료모델을 적용할 수 있다. 본 연구에서는 비선형 재료모델인 Ramberg-Osgood모델 및 Bi-linear 탄소성 모델을 적용하여 긴장설치 및 극한하중 해석을 수행하였고, 그 결과를 이전의 실험적 연구결과와 비교 분석하였다. 본 연구의 해석결과는 이전의 실험적 연구결과와 유사하였으며, 명시적 해석법의 특성상 효율적으로 후좌굴거동 특성까지 해석할 수 있었다.

• 한국주거학회:학술대회논문집
• /
• 한국주거학회 2006년도 추계학술발표대회 논문집
• /
• pp.366-369
• /
• 2006

Multi Housing design has not considered the remodeling even at the beginning of the construction. This severely hindered systematic maintenance, providing fundamental causes of consuming society. In general, in about 20 years when the buildings become too old, they are brought down or removed with a trail of waste left behind. In addition, since the current remodeling or future remodeling type is a general remodeling that leaves only a frame, some question the role of the remodeling as a solution to the reconstruction from economically and environmentally efficient aspects. This study intends to find a solution for long-life span multi-family housing design, promoting sequential remodeling by stating the life cycle of components. Problems were identified by analyzing joints, design and construction of multi-family housing based on the previous researches. Conclusion from characterization of the design plan according to joint parts can be summarized as the following firstly, the problem of the wet was seen in joints between the structure and a finishing materials and ones between separate finishing materials. Secondly, the problem of overlap was frequently seen in joints between the structure and a door/window, ones between a door/window and a finishing materials, and ones between a finishing materials and an electrical/mechanical device.

• Advances in aircraft and spacecraft science
• /
• 제1권3호
• /
• pp.331-351
• /
• 2014

The paper presents the development of numerical models referred to a morphing actuated aileron. The structural solution adopted consists of an internal part made of a composite chiral honeycomb that bears a flexible skin with an adequate combination of flexural stiffness and in-plane compliance. The identification of such structural frame makes possible an investigation of different actuation concepts based on diffused and discrete actuators installed in the skin or in the skin-core connection. An efficient approach is presented for the development of aeroelastic condensed models of the aileron, which are used in sensitivity studies and optimization processes. The aerodynamic performances and the energy required to actuate the morphing surface are evaluated and the definition of a general energetic performance index makes also possible a comparison with a rigid aileron. The results show that the morphing system can exploit the fluid-structure interaction in order to reduce the actuation energy and to attain considerable variations in the lift coefficient of the airfoil.

• 대한전자공학회논문지TC
• /
• 제48권2호
• /
• pp.79-84
• /
• 2011

본 논문에서는 아이솔레이션 에이드를 사용하여 격리도를 향상시킨 무선랜용 MIMO안테나를 설계하였다. IEEE 802.11.n의 무선랜대역인 2.4GHz대역과 5GHz대역에서 사용이 가능한 PIFA를 안테나 프레임과 접지면을 기준으로 대칭으로 배치하였다. 두 안테나 사이에 아이솔레이션 에이드를 삽입하여 2.4GHz대역의 격리도를 최대 5dB향상시켰고, 5GHz대역의 격리도를 최대 7dB향상 시켰다. 제안된 안테나의 전체효율은 60%이상이며, 계산된 ECC(Envelope Correlation Coefficient)는 0.1이하이다.

• Structural Monitoring and Maintenance
• /
• 제5권3호
• /
• pp.417-428
• /
• 2018

In this paper, various model reduction methods were assessed using a shear frame, plane and space truss structures. Each of the structures is one-dimensional, two-dimensional and three-dimensional, respectively. Three scenarios of poor, better, and the best were considered for each of the structures in which 25%, 40%, and 60% of the total degrees of freedom (DOFs) were measured in each of them, respectively. Natural frequencies of the full and reduced order structures were compared in each of the numerical examples to assess the performance of model reduction methods. Generally, it was found that system equivalent reduction expansion process (SEREP) provides full accuracy in the model reduction in all of the numerical examples and scenarios. Iterated improved reduced system (IIRS) was the second-best, providing acceptable results and lower error in higher modes in comparison to the improved reduced system (IRS) method. Although the Guyan's method has very low levels of accuracy. Structures were classified with the excitation frequency. High-frequency structures compared to low-frequency structures have been poor performance in the model reduction methods (Guyan, IRS, and IIRS).

• 천문학회지
• /
• 제30권1호
• /
• pp.95-106
• /
• 1997

We investigate the velocity distribution of dark matter in the disk of a galaxy like the Milky Way at the solar radius. Using N-body simulations with the total mass and z-component of angular momentum conserved, we calculate the response of a dissipationless dark matter galactic halo during the dissipational collapse of the baryonic matter in spiral galaxy formation. The initial distribution of dark matter and baryonic particles is assumed to be a homogeneous mixture based on a King model. The baryonic matter is assumed to contract, forming the final luminous components of the galaxy, namely the disk and, in some cases, a bulge and central point. Both slow and fast growth of the luminous components are considered. We find that the velocity distribution of dark matter particles in a reference frame rotating slowly about the galaxy center in the plane of the disk is similar to a Maxwellian, but it is somewhat boxier, being flatter at the peak and truncated in the tails of the distribution. We tabulate parameters for the best-fitting Maxwellian and modified-Maxwellian distributions. There is no significant difference between slow collapse and fast collapse for all these results. We were unable to detect any effect of disk formation on the z-dependence of the dark matter density distribution.

• 전력전자학회논문지
• /
• 제3권2호
• /
• pp.156-164
• /
• 1998

3상 전압원 PWM 컨버터의 동작 영역을 동기 좌표계의 전류 벡터 평면에서 구분하고 그 특징을 설명하였다. 그 중 감역률 영역에서는 주어진 부하에 해당하는 입력 전류를 단위 역률로 제어하는 경우, 입력 전류는 왜곡되고 DC 링크 전압에는 맥동과 제어 오차가 발생하게 되어 주어진 부하 조건에서는 좋은 제어 성과를 얻을 수 없다. 본 논문에서는 이러한 문제점을 해결하는 최적 전류 벡터를 선정하는 방법을 제안하였다. 최적 전류 벡터의 선정으로 입력 전류를 가능한 최대 역률로서 정현적으로 제어하는 동시에 안정한 DC 링크 전압을 제어할 수 있게 하여 3상 전압원 PWM 컨버터의 동작 영역을 확장시킬 수 있다. 제안된 제어 방법을 실험을 통하여 증명하였다.

• Journal of Advanced Marine Engineering and Technology
• /
• 제25권5호
• /
• pp.1130-1139
• /
• 2001

Springs are widely utilized in machine element. To find out stiffness of coil spring, the space beam theory using the finite element method is adopted in this paper. In three dimensional space, a space frame element is a straight bar of uniform cross section which is capable of resisting axial forces, bending moments about two principal axes in the plane of its cross section and twisting moment about its centroidal axis. The corresponding displacement degrees of freedom are twelve. The displacements of nodal points due to small increment of force are calculated by the finite element method and the calculated nodal displacements are added to coordinates of nodal points. The new stiffness matrix of the system using the new coordinates of nodal points is adopted to calculated the another increments of nodal displacements, that is, the step by step method is used in this paper. The results of the finite element method are fairly well agreed with those of various experiments. Using MATLAB program developed in this paper, spring constants can be predicted by input of few factors.

• 한국지능시스템학회:학술대회논문집
• /
• 한국퍼지및지능시스템학회 2003년도 ISIS 2003
• /
• pp.559-562
• /
• 2003

A motion-based background subtraction method without geometric computation is proposed, allowing that the camera is moving parallel to the ground plane with uniform velocity. The proposed method subtracts the background region from a given image by evaluating the difference between calculated and model Hows. This approach is insensitive to small errors of calculated optical flows. Furthermore, in order to tackle the significant errors, a strategy for incorporating a set of optical flows calculated over different frame intervals is presented. An experiment with two real image sequences, in which a static box or a moving toy car appears, to evaluate the performance in terms of accuracy under varying thresholds using a receiver operating characteristic (ROC) curve. The ROC curves show, in the best case, the figure-ground segmentation is done at 17.8 ％ in false positive fraction (FPF) and 71.3％ in true positive fraction (TPF) for the static-object scene and also at 14.8％ in FPF and 72.4％ In TPF for the moving-object scene, regardless if the calculated optical flows contain significant errors of calculation.

• 한국해양공학회지
• /
• 제6권2호
• /
• pp.76-84
• /
• 1992

In this study, corrosion fatigue test of SAPH45 steel was performed by the use of plane behavior of base metal (BM) and heat affected zone (HAZ) of SAPH45. The main results obtained are as follows: 1) The more aspect ratio (b/t) of corner crack decreases, the more aspect ratio (b/a) takes greatly effect by corrosion. 2) The correlation between the stress intensity factor range ($\Delta$k) and crack growth rate (da/dN) for weldment in seawater is given by Paris rule as follow: da/dN=C($\Delta$K) super(m). Where m is constant, and the value is 3.82-3.84. 3) The accelerative factor ($\alpha$) of BM and HAZ under seawater is about 1.1-1.9, and ($\alpha$) of HAZ increases more and more under the low $\Delta$K region. 4) HAZ is more susceptible to corrowion than BM because of potential of electrode (E sub(c)) of HAZ becomes more less noble potential than that of BM.