• Proceedings of the Korean Society of Rural Planning Conference
• /
• 1998.03a
• /
• pp.35-40
• /
• 1998

The characteristics of traditional house and standard house of rural region were analyzed through survey and literature. The plane spatial structure of rural housing was presented unde]environmental integrity and traditional preservation.

• Journal of the Korean Society for Precision Engineering
• /
• v.11 no.2
• /
• pp.104-109
• /
• 1994

This research describes some developments of computer-aided process planning and die design for hot forging products of H-shaped plane strain produced by the press. The system is composed of three main modules(process planning module, die design module and simulation module) which are used independently or in all. Systm capabilities include as follows: 1. In die design module, using the results of process planning module, the shape and size of bolcker and finish die in each operation are determined and the ouput id generated in graphic form for manufacturing drawing. 3. In simulation module, the flow pattern of workpiece and the load/stroke curve are approximately predicted. Design rules for process planning and die design are extracted from plasticity theories, handbooks, relevant references and empirical know-how of field experts in hot forging companies. The developed system provides poweful capabilities for process planning and die design of hot forging products.

• Korean Institute of Interior Design Journal
• /
• v.20 no.3
• /
• pp.172-181
• /
• 2011

Many of penthouse apartments began to be built and distributed in Korea from the 2000s. However, we have a transformed definition from the international concept of penthouse. It seems that the penthouse apartments in Korea have a confined definition as a luxury and privileged house-we often find it out from advertisements of newly built apartments. In this thesis, therefore, it needs to make a clear and substantial definition of penthouse. And on the base of this definition, this study is intended to analyze planes of penthouse apartments which are distributed recently. It is in order to find out positive aspects of penthouse apartments and to make practical application of this analysis. The process of this study for plane-planning is as follows. Firstly, it is investigated and analyzed that external factors that have an effect on plane-planning such as locations and types of penthouse apartments. Secondly, an interior of penthouse apartments are divided into a private, public and outward area. And properties of each area through this research show the way of division and arrangement of plane. Thirdly, methods of connection between spaces is analyzed on the base of results of research for the way of partition. Finally, specific characters of penthouse apartments planning is derived from synthesis of research. In conclusion, analysis of plane-planning of penthouse apartments is summarized as follows. The majority of penthouse apartments is arranged to small portions of households and on higher stories in apartment which is situated around Han River or public parks. These external factors influence the plane-planning in both the interior and exterior way. For the exterior planning in space, it becomes important to design bays as many as possible in contact with outside in order to satisfy demands for fine prospects. It is also important to plan extra places naturally such as a terrace in order to provide virtual grounding. In the interior planning, a large size of interior induces to develop space for linking between each area, such as corridors or extra rooms. This makes it possible that the private area is linked to each other, at the same time it has its own distinctiveness according to its usage.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1997.10a
• /
• pp.527-530
• /
• 1997

An automated process planning system for cold forging of non-axisymmetric parts of comparatively simple shape was developed in this study. Programs for the system have been written with Visual LISP in the AutoCAD using a personal computer and are composed of four main modules such as input module, shape cognition and shape expression module, material diameter determination module and process planning module. The design rules and knowledges for th system are extracted from the plasticity theories. handbook, relevant reference and empirical knowledge of field experts. Generally, in forging, only front view is needed for expression of axisymmetric parts, but non-axisymmetric parts are needed both front view and plane. At the plane, this system cognizes the external shape of non-axisymmetric parts - number of sides of regular polygon and radius of a circle circumscribing the polygon of n sides. At the front view, the system perceives diameter of axisymmetric portions and hight of primitive geometries such as polygon, cylinder, cone, concave, convex, etc.

• The korean journal of orthodontics
• /
• v.52 no.1
• /
• pp.53-65
• /
• 2022

Objective: Planning of incisal position is crucial for optimal orthodontic treatment outcomes due to its consequences on facial esthetics and occlusion. A systematic summary of the proposed parameters is presented. Methods: Studies on Google Scholar^©, PubMed^©, and Cochrane Library, providing quantitative information on optimal central incisor position were included. Results: Upper incisors supero-inferior position (4-5 mm to upper lip, 67-73 mm to axial plane through pupils), antero-posterior position (3-4 mm to Nasion-A, 3-6 mm to A-Pogonion, 9-12 mm to true vertical line, 5 mm to A-projection, 9-10 mm to coronal plane through pupils), bucco-lingual angulation (4-7° to occlusal plane perpendicular on models, 20-22° to Nasion-A, 57-58° to upper occlusal plane, 16-20° to coronal plane through pupils, 108-110° to anterior-posterior nasal spine), mesio-distal angulation (5° to occlusal plane perpendicular on models). Lower incisors supero-inferior position (41-48 mm to soft-tissue mandibular plane), antero-posterior position (3-4 mm to Nasion-B, 1-3 mm to A-Pogonion, 12-15 mm to true vertical line, 6-8 mm to coronal plane through pupils), bucco-lingual angulation (1-4° to occlusal plane perpendicular on models, 87-94° to mandibular plane, 68° to Frankfurt plane, 22-25° to Nasion-B, 105° to occlusal plane, 64° to lower occlusal plane, 21° to A-Pogonion), mesio-distal angulation (2° to occlusal plane perpendicular on models). Conclusions: Although these findings can provide clinical guideline, they derive from heterogeneous studies in terms of subject characteristics and reference methods. Therefore, the optimal incisal position remains debatable.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.39 no.6
• /
• pp.549-559
• /
• 2015

In this paper, an efficient dynamic reactive motion planning method for an autonomous vehicle in a dynamic environment is proposed. The purpose of the proposed method is to improve the robustness of autonomous robot motion planning capabilities within dynamic, uncertain environments by integrating a virtual plane-based reactive motion planning technique with a sensor fusion-based obstacle detection approach. The dynamic reactive motion planning method assumes a local observer in the virtual plane, which allows the effective transformation of complex dynamic planning problems into simple stationary ones proving the speed and orientation information between the robot and obstacles. In addition, the sensor fusion-based obstacle detection technique allows the pose estimation of moving obstacles using a Kinect sensor and sonar sensors, thus improving the accuracy and robustness of the reactive motion planning approach. The performance of the proposed method was demonstrated through not only simulation studies but also field experiments using multiple moving obstacles in hostile dynamic environments.

• Spatial Information Research
• /
• v.6 no.1
• /
• pp.1-10
• /
• 1998

The need of aerial photographs is increasing for small area development such as facility management, site planning, residence planning, and so on. It is not an easy task, however, to take aerial photographs using an aircraft for metric photogrammetry because of the strict regulatins of flying and also photographing in Korea, as well as the cost. As one of efficient methods to take large-scale aerial photographs, we investigated the ways of photographing by a remote controlled model plane(RC plane) with a light weight non-metric camera on board. We had examined the principles of RC planes and assembled a RC plane, And test photographing was performed. Even though we obtained reasonably good stereo-pairs for the grounds and facilities using the RC plane, we found there were yet many problems to be solved, such as difficulties of RC plane control, camera focusing, and accumulation of dust on the camera lens.

• Journal of Chest Surgery
• /
• v.54 no.4
• /
• pp.246-252
• /
• 2021

Although lobectomy remains the gold-standard surgical treatment for non-small-cell lung cancer, the frequency of thoracoscopic segmentectomy is increasing. Multiple factors must be considered in the choice of the procedure, ranging from adequate surgical planning or simulation, tumor localization, and identification of the intersegmental plane to severing the intersegmental plane to achieve an oncologically safe surgical margin with no or minimal manual palpation and different landmarks. In this article, we present an overview of methods for each procedural step of thoracoscopic segmentectomy, from preoperative planning to division of the intersegmental plane.

• The korean journal of orthodontics
• /
• v.21 no.2 s.34
• /
• pp.367-397
• /
• 1991

This study was aimed to investigate the occlusal plane inclination in relation to the skeletal and dental assessment measurements in order to provide a reference in orthodontic treatment planning as the occlusal plane should be reconstructed orthodontically or gnathologically. The sample consisted of 73 normal occlusions and 113 malocclusions of adults. The computerized statistical analysis of 38 occlusal plane's and 29 skeletal and dental measurements were carried out with SPSS. The conclusions were as follows; 1 In normal occlusion, COP-NaPog was average $83.63^{\circ}$ (2.44) and occlusal plane inclination had a strong negative correlation with SNB and FH-NaPog. 2. In normal occlusion, ArANS plane was nearly parallel to the occlusal plane. 3. In malocclusion, the larger the mandibular plane angle and the shorter the ramus height was, the more downward the occlusal plane had a tendency to tip anteriorly. 4. Occlusal plane was more horizontal in deep bite group, while it was steeper in openbite group. 5. The curve of Spee was severe in deep bite group but in openbite group mandibular occlusal plane showed average reverse curvature, where it was found that the configuration of the occlusal plane contributed to the excess or deficiency of anterior overbite.

• Journal of the Korean Society for Precision Engineering
• /
• v.19 no.2
• /
• pp.195-202
• /
• 2002

An automated process planning system for cold forging of non-axisymmetric parts of comparatively simple shape was developed in this study. Programs for the system have been written with Visual LISP in the AutoCAD using a personal computer and are composed of four main modules such as input module, shape cognition and shape expression module, material diameter determination module and process planning module. The design rules and knowledges for the system are extracted from the plasticity theories, handbook, relevant reference and empirical knowledge of field experts. Generally, in forging, only front view is needed for expression of axisymmetric parts, but non-axisymmetric parts need front and plane view. At the plane, this system cognizes the external shape of non-axisymmetric, parts - number of sides of regular polygon and radius of a circle circumscribing the polygon of n sides. At the front view, the system perceives diameter of axisymmetric portions and height of primitive geometries such as polygon, cylinder, cone, concave, convex, etc.