• Maxillofacial Plastic and Reconstructive Surgery
• /
• 제29권2호
• /
• pp.141-147
• /
• 2007

The purpose of this study was to evaluate the effects of maxillary occlusal plane angle to postoperative skeletal stability by comparative analysis after two-jaw surgery of patients with skeletal CIII malocclusion. This study was made with lateral cephalometric radiography of 52 patients with skeletal class III malocclusion that were performed to Le Fort I osteotomy and BSSRO. And 52 patients were divided to Group A(n=30) and B(n=22). Maxillary posterior impaction was not conducted in Group A, which the pre-operative maxillary occlusal plane angle was in a normal range, and for Group B, which the pre-operative maxillary occlusal plane was low, the maxillary posterior impaction was conducted. The results were obtained as follows : 1. The relapse rate of Group A, which the pre-operative maxillary occlusal plane angle was in a normal range, was relatively stable compared to Group B, which the pre-operative maxillary occlusal plane was low. 2. The relapse rate of each measurement of Group B, which had the maxillary occlusal plane altered during the operation, was somewhat high, and of those, the post-operative relapse rate of overjet, overbite, mandibular plane angle appeared to be significantly high in the statistics. The analyzed results above, was thought to be indicating that the pre-operative maxillary occlusal plane angle was closely related to the post-operative skeletal stability, and that obtaining post-operative skeletal stability only through operative normalization of occlusal plane angle may meet limitations.

• 대한물리의학회지
• /
• 제8권1호
• /
• pp.41-48
• /
• 2013

PURPOSE: This study was to determine the effect of the plane of movement (sagittal plane vs. scapular plane) and shoulder flexion angle ($90^{\circ}$ vs. $130^{circ}$) during scapular protraction exercises in healthy subjects by investigating the elecromyographic (EMG) activities of the serratus anterior (SA), upper trapezius (UT), and pectoralis major (PM). METHODS: Twenty-one healthy subjects participated in this study. Subjects performed maximal scapular protraction at the $90^{\circ}$ or $130^{\circ}$ shoulder flexion angles in the sagittal or scapular planes. Surface EMG was recorded from the SA and UT, and PM muscles. Dependent variables were examined by 2 (plane) ${\times}$ 2 (angle) repeated measures of analysis of variance (ANOVA). RESULTS: Significantly increased EMG activities in the SA and UT were found during scapular protraction exercise at the $130^{\circ}$ shoulder flexion angle in the sagittal and scapular plane. Also, EMG activity of the PM significantly decreased at the $130^{\circ}$ shoulder flexion angle in the sagittal plane and the $90^{\circ}$ and $130^{\circ}$ shoulder flexion in the scapular plane. CONCLUSION: we recommend scapular protraction exercise at the $90^{\circ}$ shoulder flexion in the sagittal plane to selectively strengthen the SA muscle with limitation of upper trapezius activity and at the $130^{\circ}$ shoulder flexion in the scapular plane to selectively strengthen the SA muscle with limitation of pectoralis major activity.

• 한국차세대컴퓨팅학회논문지
• /
• 제15권4호
• /
• pp.80-88
• /
• 2019

소프트웨어 정의 네트워킹(SDN)은 네트워크 장치의 데이터 기능과 제어기능을 분리한 미래 네트워킹 기술이다. 네트워크 장치들이 하나의 컨트롤러에 의해 중앙 제어되는 SDN의 구조는 대규모의 네트워크로의 확장성을 보장하기가 쉽지 않다. 선행연구들은 다수의 컨트롤러를 배치하는 수평적 확장성에 초점을 두어왔다. 이 연구들은 제어 평면과 응용 평면을 하나의 컨트롤러로 추상화하고 있다. 보편적인 SDN 아키텍처의 계층은 데이터 평면, 제어 평면, 응용 평면으로 나뉘는데 응용평면과 제어평면은 논리적으로 분리되어 있음에도 두 평면을 하나의 컨트롤러로 간주하였다. 따라서 본 논문에서는 대기행령 이론을 바탕으로 제어 평면과 응용 평면을 분리하여 반영한 트래픽 성능 분석 모델을 제안한다. 이 모델을 사용하면 복잡한 시뮬레이션 대신 간단하게 컨트롤러 배치 문제 등과 같은 확장성 문제에 활용할 수 있다.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1998년도 가을 학술발표논문집(II)
• /
• pp.513-518
• /
• 1998

In Half Precast Concrete Method, such as composite slab and composite wall, Interface between half PC plate and cast-in-place concrete is occurred. And this interface endure lastly in-plane shear which is occurred by external force. Therefore, test was executed to study in-plane shear strength of interface between half PC plate and cast-in-place concrete. In this test, Experimental parameters are finishing condition of the interface, cohesion of concrete, existence and nonexistence of re-bar truss, and angle and direction of lattice of re-bar truss. Comparing and analyzing experimental results, conclusions are obtained as follows. (1) In-plane shear strength of wide interface in composite plate is more affected by the roughness of interface than re-bar truss. And cohesion of concrete contribute to increasing in-plane shear strength. Therefore it seems that the interface should be roughen and kept clean to improve in-plane shear strength. (2) It seems that shear friction equation in ACI code can be sagely available for design of in-plane shear of composite plate.

• 한국공작기계학회논문집
• /
• 제12권2호
• /
• pp.53-58
• /
• 2003

It is very important to measure linear cycle plane positioning accuracy of NC lathe as it effects all other parts of machines machined by them in industries. If the plane positioning accuracy of NC lathe is bad, the dimension accuracy and the change-ability of works will be bad in the assembly of machine parts. In this paper, computer software systems are organized to measure linear cycle plane positioning displacement of ATC(Automatic tool changer) on zx plane of NC lathe using two linear scales. And each sets of error data obtained from the test is descriptions to plots and the results of linear cycle plane positioning errors are expressed as nutriments by computer treatment.

• 전자공학회논문지D
• /
• 제35D권1호
• /
• pp.16-26
• /
• 1998

This paper presents a design methodology for magnetically tunable X-band E-plane type waveguide filters. The proposed design is based on using of quarter wavelength transmission line for compensating the negative length transmission line of end K-inverters of E-plane type waveguide filters. The derived formulae are applied for initial design and the correction method is also provided for final design by considering the frequency dependent characteristic of K-inverters. The analysis results of E-plane pype waveguide structure loaded with ferrite slab are obtained using the edge based finite element method including higher order mode effecets. It is shown that the unilateral finline E-plane type waveguide filter as well as the bilateral finline E-plane type waveguide filter achieves the the manetically tunable characteristic. The X-band experimantal results for bilateral and unilateral finline E-plane type waveguide filters agree well with the simulated data.

• 대한용접접합학회:학술대회논문집
• /
• 대한용접접합학회 2002년도 Proceedings of the International Welding/Joining Conference-Korea
• /
• pp.113-120
• /
• 2002

The effect of out-of-plane loads on the fatigue strength of welded steel structures is examined through fatigue tests with weldment of two fillet weld joint types. The results of the fatigue tests are compared with those under axial loads, on the basis of the hot spot stress range at the weld toe. From the result of the comparison, a method on how to incorporate the effect of the out-of-plane bending stress is proposed using design S-N curves derived from fatigue tests under the axial load. The proposed method is useful for rational assessment of the fatigue strength of fillet-welded structures, where combined stresses of the in-plane axial stress and the out-of-plane bending stress are induced simultaneously due to the complexity of applied loads and structural geometry.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2003년도 컴퓨터소사이어티 추계학술대회논문집
• /
• pp.157-160
• /
• 2003

Recently, several steganographic algorithms for two-color binary images have been proposed. In this paper, we propose a steganographic algorithm which embeds a secret message into bitmap images and palette-based images. To embed a message, the suggested algorithm divides a bitmap image into bit-plane images from LSB-plane to MSB-plane for each pixel, and considers each bit-plane image as a binary one. The algorithm splits each bit-plane image into m$\times$n blocks. and embeds a r-bit(r=[log$_2$(mn+1]-1) message into the block. And our schemes embed a message to every bit-plane from LSB to MSB to maximize the amount of embedded message and to minimize the degradation. The schemes change at most two pixels in each block. Therefore, the maximal color changes of the new algorithm are much smaller than other bit-plane embedding schemes' such as the substantial substitution schemes.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2014년도 제46회 동계 정기학술대회 초록집
• /
• pp.314.1-314.1
• /
• 2014

The properties of Ni/Au Ohmic contacts formed on nonpolar a-plane GaN grown on r-plane sapphire substrate with different tilt angles are investigated using current-voltage (I-V) measurements. To investigate the effects of pattern direction and size on Ohmic contact properties of a-plane GaN, transmission line method (TLM) patterns are formed either along c-axis and m-axis on nonpolar GaN surface with different size. I-V measurement results show that the size of TLM pattern and formation direction of electrode have an effect on the electrical properties of a-plane GaN. The large sized patterns show the relatively lower sheet resistance compared to the small sized patterns. In addition, the sheet resistance of a-plane GaN along m-axis shows lower values than that along the c-axis. Finally, the effects of miscut angle of r-sapphire substrate ($0.2^{\circ}$, 0.4oand $0.6^{\circ}$) on electrical properties of a-plane GaN will be discussed.

• 한국소음진동공학회논문집
• /
• 제16권2호
• /
• pp.198-206
• /
• 2006

The dynamic responses of both the in-plane and out-of-plane vibrations are investigated for an axially moving membrane. The equations of motion are derived for the moving membrane with no-slip boundary conditions by using the extended Hamilton principle. Based on the Galerkin method, the discretized equations of motion are derived. The generalized-time integration method is applied to compute the dynamic responses for the in-plane and out-of-plane motions. From the computed results, the responses are compared between the in-plane and out-of-plane vibrations. Furthermore. the effects of velocity and acceleration on the dynamic behaviours for displacements and stresses are presented.