• 제목/요약/키워드: Planar.

검색결과 3,656건 처리시간 0.098초

평면 능동위상배열안테나 결함소자 진단방법에 관한 연구 (A Study on Fault Diagnosis for Planar Active Phased Array Antenna)

  • 정진우;강승호
    • 한국전자통신학회논문지
    • /
    • 제18권1호
    • /
    • pp.11-22
    • /
    • 2023
  • 평면 능동위상배열안테나 시스템에 있어, 간소화된 방사특성 측정 절차를 가지는 방사소자 결함진단 기법을 제시하였다. 이를 위해 평면 배열 구성에 대한 방사특성을 기반으로 선형 배열 구성으로 근사화 분석할 수 있는 방법 및 방사소자 결함진단과정에서 발생할 수 있는 유일해 문제를 해소하기 위한 방법을 연구하였다. 본 논문에서 제시된 기법 및 유전 알고리즘을 기반으로 다양한 평면 능동위상배열안테나 구성에 따른 방사소자 결함진단에 대한 모의실험을 수행하였다. 모의실험 결과, 제시된 방사소자 결함진단 기법은 다양한 구성을 가지는 평면 능동위상안테나에 대해서도 적용가능함을 확인하였다.

소화기계 Leakage 환자 검사 시 SPECT-CT의 유용성 평가 (Evaluation of Usefulness of SPECT-CT at the Examination of Digestive System Leakage Patients)

  • 함준철;오신현;최용훈;강천구;김재삼
    • 핵의학기술
    • /
    • 제22권1호
    • /
    • pp.98-102
    • /
    • 2018
  • 소화기계 Leakage환자 검사 시 Planar 영상만으로 담즙누출 및 출혈여부와 위치감별이 쉽지 않다. SPECT-CT를 이용하여 담즙누출 및 위장관출혈 확인과 위치 감별을 통한 유용성을 평가하고자 한다. 본원에 내원한 환자 중 담즙누출 의심 환자 8명 및 위장관출혈이 의심되는 환자 5명, 총 13명을 대상으로 Planar영상 획득 후 판독실요청에 따라 SPECT-CT를 진행했다. 장비는 SIEMENS사의 Symbia T16과 GE사의 Discovery 670을 사용했다. Planar 및 SPECT-CT 영상은 4명의 경험 있는 핵의학 의사에 의해 1~10점의 점수로 평가했다. 민감도 및 특이도를 이용하여 ROC 곡선에 의한 검사 평가를 시행했다. 최종 진단은 재수술 결과 및 추적 관찰을 통해 확인했다. SPECT-CT의 민감도, 특이도 및 정확도는 각각 91.7%, 100% 및 94.2%였다. Planar영상은 각 각 83.3%, 68.8% 및 78.8%였다. Planar영상은 SPECT-CT와 비교하여 낮은 진단 정확도를 보였다(78.8%, 94.2%, p<0.05). 또한 ROC곡선 분석에서 SPECT-CT의 진단 신뢰도는 Planar영상보다 유용한 결과를 나타냈다(p<0.05). SPECT-CT는 담즙누출 및 위장관출혈 진단과 위치 감별에 민감도와 특이도가 높게 나타났다. Planar영상과 함께 SPECT-CT를 추가로 시행한다면 담즙누출 및 위장관출혈 환자의 진단과 위치 감별평가를 향상 시킬 것으로 사료된다. SPECT-CT는 다른 장기와의 중첩으로 진단이 어려울 경우 유용성이 있지만 추가적인 CT피폭에 대한 고려는 충분히 이루어져야 할 것이다.

가변주파수 스위칭 Flyback 컨버터를 이용한 자동차용 고압방전등 안정기의 설계 (Design of on Automotive HID Ballast using Variable Frequency Switching Flyback Converter)

  • 엄태욱;김윤호
    • 조명전기설비학회논문지
    • /
    • 제22권4호
    • /
    • pp.166-171
    • /
    • 2008
  • 본 논문은 가변주파수 스위칭 방식의 flyback 컨버터를 이용한 자동차용 35[W]급 고휘도 방전 램프용 전자식 안정기의 고효율 제어시스템을 구현하였다. 또한 안정기 성능, 크기 그리고 효율을 고려하여 planar 변압기를 이용하여 flyback 컨버터를 설계하였다. HID 램프를 자동차에 적용하기 위해 복잡한 과도특성을 제어할 수 있는 매우 복잡한 제어회로와 고효율의 안정기의 제작이 요구되어진다. 제안된 전자식 안정기는 planar 변압기를 사용한 flyback 컨버터, full bridge 인버터와 승압 점화장치로 구성되어 있으며, flyback 컨버터의 스위칭 주파수는 안정기에 입력전압의 변화에 따라 제어되도록 설계하였고, planar변압기를 사용하여, 안정기의 가격과 크기를 크게 절감할 수 있었다. 제안된 시스템에 대한 성능 및 효율은 여러 가지 실험을 통해 확인하였다.

소아 요로 감염에서 99mTc DMSA 신스캔 평면영상에 추가된 SPECT 영상의 진단적 가치 (The Diagnostic Value of 99mTc DMSA Renal Scan SPECT Images in Addition to Planar Image in Children with Urinary Tract Infection)

  • 양재영;양정안;서정완;이승주
    • Childhood Kidney Diseases
    • /
    • 제5권1호
    • /
    • pp.22-29
    • /
    • 2001
  • 목 적 : 99mTc DMSA 신스캔 평면영상은 급성신우신염과 신반흔의 진단에 유용한 검사로 알려져 있다. 최근에는 99mTc DMSA 신스캔 평면 영상에 Single-photon emission computed tomography(SPECT) 영상을 추가하여 예민도를 높일 수 있다고 하였다. 저자들은 소아 요로감염에서 99mTc DMSA 신스캔 평면영상에 추가된 SPECT영상의 진단적 가치를 평가하고자 하였다. 대상 및 방법 : 1997년 1월부터 1999년 7월 까지 이대 목동병원 소아과에서 요로감염으로 진단 받고 99mTc DMSA 신스캔 평면영상에 SPECT영상을 추가 시행하였던 130명 (260 kidney unit)과 신반흔으로의 진행을 파악하기 위하여 추적검사를 시행하였던 22명(44 kidney unit)을 대상으로 하였다. 신스캔은 99mTc DMSA를 주사하고 3시간후 전면상과 후면상의 평면영상을 얻고, 이어서 저에너지 범용 조준기가 장착된 회전형 카메라 (Starcam 4000-I U.S.A. GE)를 사용하여 SPECT Axial과 Coronal 영상을 얻어 진단율을 비교하였다. 통계는 Yates 교정 후 Chi 검정하였다. 결 과 : 급성신우염 환자의 진단율은 SPECT영상에서 47.7$\%$로 평면영상의 35.4$\%$에 비해 12.3$\%$가 높았다. 신단위로 평가하면 SPECT 영상에서는 32.3$\%$로 평면영상의 25.8$\%$에 비하여 6.5$\%$가 높았다. 평면 영상 음성인 18신단위(6.9$\%$)가 SPECT 영상에서는 14신단위(5.4$\%$에서 국소성결손, 4신단위 (1.5$\%$)에서 다발성 결손이었고 평면영상에서 양성인 1신단위 (0.4$\%$)가 SPECT 영상에서 음성이었다. 평면영상에 비하여 SPECT영상이 더 우수한 경우가 17.3$\%$, 동일한 경우가 82.3$\%$, 미흡한 경우가 0.4$\%$였다. 99mTc DMSA 신스캔의 신반흔 진단율은 SPECT 영상에서는 43.2$\%$로 평면영상의 36.4$\%$에 비하여 6.8$\%$ 높았다. 평면영상에서 양성은 SPECT영상에서 모두 양성이었고, 평면영상에서 음성이 SPECT영상에서 양성인 경우는 6.8$\%$(3신단위)이었다. 평면영상에 비하여 SPECT 영상이 우수한 경우가 11.4$\%$, 동일한 경우가 88.6$\%$이었다. 결 론 : 99mTc DMSA신스캔 평면영상에 추가된 SPECT영상은 급성신우염과 신반흔의 진단율을 높이고 더 우수한 영상을 얻을 수 있었다.

  • PDF

Tc-99m DMSA SPECT for Follow-Up of Non-Operative Treatments in Renal Injuries: A Prospective Single-Center Study

  • Sang-Geon Cho;Ki Seong Park;Jahae Kim;Jang Bae Moon;Ho-Chun Song;Taek Won Kang;Seong Hyeon Yu
    • Korean Journal of Radiology
    • /
    • 제24권10호
    • /
    • pp.1017-1027
    • /
    • 2023
  • Objective: The assessment of cortical integrity following renal injuries with planar Tc-99m dimercaptosuccinic acid (DMSA) scintigraphy depends on measuring relatively decreased cortical uptake (i.e., split renal function [SRF]). We analyzed the additive values of the volumetric and quantitative analyses of the residual cortical integrity using single-photon emission computed tomography (SPECT) compared to the planar scintigraphy. Materials and Methods: This prospective study included 47 patients (male:female, 32:15; age, 47 ± 22 years) who had non-operatively managed renal injuries and underwent DMSA planar and SPECT imaging 3-6 months after the index injury. In addition to planar SRF, SPECT SRF, cortical volume, and absolute cortical uptake were measured for the injured kidney and both kidneys together. The correlations of planar SRF with SPECT SRF and those of SRF with volumetric/quantitative parameters obtained with SPECT were analyzed. The association of SPECT parameters with renal function, grades of renal injuries, and the risk of renal failure was also analyzed. Results: SPECT SRF was significantly lower than planar SRF, with particularly higher biases in severe renal injuries. Planar and SPECT SRF (dichotomized with a cutoff of 45%) showed 19%-36% of discrepancies with volumetric and quantitative DMSA indices (when dichotomized as either high or low). Absolute cortical uptake of the injured kidney best correlated with glomerular filtration rate (GFR) at follow-up (ρ = 0.687, P < 0.001) with significant stepwise decreases by GFR strata (90 and 60 mL/min/1.73 m2). Total renal cortical uptake was significantly lower in patients with moderate-to-high risk of renal failure than those with low risk. However, SRF did not reflect GFR decrease below 60 mL/min/1.73 m2 or the risk of renal failure, regardless of planar or SPECT (count- or volume-based SRF) imaging. Conclusion: Quantitative measurements of renal cortical integrity assessed with DMSA SPECT can provide more clinically relevant and comprehensive information than planar imaging or SRF alone.

UV 임프린트 공정을 이용한 평판형 광도파로 기반의 집적형 분광 모듈 제작 (Fabrication of Monolithic Spectrometer Module Based on Planar Optical Waveguide Platform using UV Imprint Lithography)

  • 오승훈;정명영;김환기;최현용
    • 마이크로전자및패키징학회지
    • /
    • 제22권3호
    • /
    • pp.73-77
    • /
    • 2015
  • 본 논문에서는 저가로 쉽게 제작할 수 있는 구조를 지닌 단일칩 형태의 고분자 기반 평판형 분광모듈을 제안하였다. 제안된 분광모듈은 UV 임프린트 기법에 의해 제작되어진 비등간격 나노회절격자와 오목거울이 포함된 평판형 광도파로로 구성되어진다. 회절효율을 향상시키기 위해 나노회절격자의 구조는 $25^{\circ}$의 블레이징 각도와 100nm의 선폭을 가지도록 설계, 제작되었다. 평판형 분광모듈은 700 nm 대역폭과 10 nm 분해능을 가짐을 확인하였다. 이러한 집적형 고분자 분광모듈은 다양한 센서 시스템에 적용될 수 있을 것으로 기대된다.

탄소성 내연적 유한요소법을 이용한 평면 이방성 박판의 성형공정해석 (Elastic-Plastic Implicit Finite Element Method Considering Planar Anisotropy for Complicated Sheet Metal Forming Processes)

  • 윤정환;김종봉;양동열;정관수
    • 소성∙가공
    • /
    • 제7권3호
    • /
    • pp.233-245
    • /
    • 1998
  • A new approach has been proposed for the incremental analysis of the nonsteady state large deformation of planar anisotropic elastic-plastic sheet forming. A mathematical brief review of a constitutive law for the incremental deformation theory has been presented from flow theory using the minimum plastic work path for elastic-plastic material. Since the material embedded coordinate system(Lagrangian quantity) is used in the proposed theory the stress integration procedure is completely objective. A new return mapping algorithm has been also developed from the general midpoint rule so as to achieve numerically large strain increment by successive control of yield function residuals. Some numerical tests for the return mapping algorithm were performed using Barlat's six component anisotropic stress potential. Performance of the proposed algorithm was shown to be good and stable for a large strain increment, For planar anisotropic sheet forming updating algorithm of planar anisotropic axes has been newly proposed. In order to show the effectiveness and validity of the present formulation earing simulation for a cylindrical cup drawing and front fender stamping analysis are performed. From the results it has been shown that the present formulation can provide a good basis for analysis for analysis of elastic-plastic sheet metal forming processes.

  • PDF

Al-Si 합금 열간단조품 내부의 판상 결함의 초음파 특성 (Ultrasonic Characteristics of Internal Planar Defects of a Hot Forged Al-Si Alloy Part)

  • 이석원;전만수;이준현
    • 비파괴검사학회지
    • /
    • 제21권6호
    • /
    • pp.612-617
    • /
    • 2001
  • 본 연구에서는 Al-Si 합금 열간단조품 내부 판상 결함을 탐지하기 위한 초음파평가 기법을 확립하였다. 이를 위하여 내부에 존재하는 여러 가지 판상 결함의 초음파 특성을 실험적으로 구하였으며, 펄스-반사법을 적용하여 초음파 탐상신호에 대한 내부 판상 결함의 각도 등이 초음파 수신신호의 형태에 미치는 영향을 평가하였다. 한편 결함위치에 따른 초음파 신호특성을 규명하기 위하여 단조품 가장자리 부위에 존재하는 내부 판상 결함의 초음파 수신신호 특성을 평가하였으며, 본 시험편에 대한 초음파 투과법 적용 한계에 대하여 고찰하였다. 나아가 500개 이상의 파단 실험을 통해 제시된 초음파 평가기법의 신뢰성을 확인하였다.

  • PDF

Tug에 의한 반잠수식 해양 구조물 위치 유지를 위한 제반 파라메터 검토 (Parameter Study of Position Keeping for Semi-submersible Offshore Structure by Tugs)

  • 이진호;박준흠;장학수
    • 한국해양공학회지
    • /
    • 제28권4호
    • /
    • pp.274-279
    • /
    • 2014
  • This paper investigates the line dynamic forces connecting tugs and a floater, where the planar motion of the floater is due to the weather criteria during the position keeping of the offshore structure by tugs. The analysis situation consists of the position keeping states for the seabed mooring line connection work of the offshore structure at the offshore site. Specifically, the decision about the tug power capacity for the position keeping is essential and depends on the weather criteria, line characteristics, length of line, etc. The planar motion of the structure is constrained by the interference of the installation vessel's operational range, behavior of the underwater fairlead, and other surrounding structures. In this paper, the tug line forces and planar motion of an offshore structure are summarized dependent on the tug line length and line material characteristics in the states fora given floater draft and weather criteria. The tug line dynamic forces and planar motion evaluated here will be used to determine the proper tug power and clearance of an offshore structure.

평면 배열 안테나에 의한 다중 빔 복사 패턴의 합성 (A Multibeam Pattern Synthesis of Planar Array Antenna)

  • 허문만;이인재;윤현보
    • 한국전자파학회논문지
    • /
    • 제17권10호
    • /
    • pp.1007-1019
    • /
    • 2006
  • 임의의 필드 분포를 갖는 단일 페치 안테나를 평면 배열하고 각 소자에 공급되는 급전 신호의 크기와 위상을 유전자 알고리즘으로 최적화하여, 여러 방향의 지향성과 널을 갖는 다중 빔 복사 패턴의 합성 방법을 제안하였다. 제안된 방법의 유효성을 확인하기 위해서, $2{\times}2$ 평면 배열 안테나를 제작하고 원거리 복사 패턴의 계산 결과와 측정 결과를 비교하여 동일한 특성을 확인하였으며, 다중 빔 복사 패턴의 합성은 $8{\times}8$ 배열 안테나 시스템을 이용하여, 시뮬레이션을 통해서 각 소자의 급전 신호의 크기와 위상을 최적화하였다.