• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2007년도 제38회 하계학술대회
• /
• pp.1106-1107
• /
• 2007

Planar magnetic based design technologies have been widely applied to power design for better cooling and ease of fabrication. The planar transformer and the planar inductor have a low profile characteristics compare to the conventional transformer which would be more cubical in volume. High frequency operation of magnetic components is a main key to achieve high power density of the power module. However, at a high frequency, the skin effect and the proximity effect have to be considered very significantly in magnetic design and also the parasitics in the converter cannot be ignored. This paper deals with the design and the experiment of planar integrated magnetic component. The optimal design for planar magnetics is summarized.

• 한국정밀공학회지
• /
• 제15권11호
• /
• pp.67-75
• /
• 1998

Geometric and thermal errors are key contributors to the errors of a computer numerically controlled turning center. A planar error synthesis model is obtained by synthesizing 11 geometric and thermal error components of a turning center with homogeneous coordinate transformation method. This paper shows the sensitivity analysis on the temperature change, the confidence evaluation on the uncertainty Of measurement systems, and the error contribution analysis from the planar error synthesis model. Planar error in the z direction was very sensitive to the temperature change. and planar errors in the x and z directions were not affected by the uncertainty of measurement systems. The error contribution analysis ,which is applicable to designing a new turning center, was helpful to find the large error components which affect planar errors of the turning center.

• 대한수학회보
• /
• 제54권3호
• /
• pp.763-787
• /
• 2017

A graph is called 1-planar if it can be drawn in the Euclidean plane ${\mathbb{R}}^2$ such that each edge is crossed by at most one other edge. The weight of an edge is the sum of degrees of two ends. It is known that every planar graph of minimum degree ${\delta}{\geq}3$ has an edge with weight at most 13. In the present paper, we show the existence of edges with weight at most 25 in 3-connected 1-planar graphs.

• 핵의학기술
• /
• 제14권2호
• /
• pp.150-154
• /
• 2010

심장기능을 평가하는데 중요한 기준이 되는 심박출계수의 측정은 반복검사가 용이한 심초음파가 가장 흔히 사용되고 있다. 현재 게이트심장혈액풀스캔의 검사 빈도가 낮고 게이트심장혈액풀 SPECT를 이용한 좌심실 심박출계수의 결과는 게이트심장혈액풀스캔과 심초음파의 결과와 비교적 잘 맞는 것으로 알려져 있으나 임상적으로는 잘 이용되지 못하고 있다. 이에 본 연구에서는 게이트심장혈액풀스캔 및 SPECT에서의 심박출계수를 심초음파와 비교하여 분석하였다. 2007년 1월부터 2010년 5월까지 34명의 환자를 대상으로 심초음파 검사 후 게이트심장혈액풀스캔과 SPECT를 함께 시행하였다. 대상 환자 가운데 남자가 23명이었고 여자는 11명이었으며 평균연령은 $52.6{\pm}27.2$세였다. 환자에게 생리식염수로 희석한 pyrophosphate 1 cc를 먼저 정맥주사하고 15분 후 20 mCi의 $^{99m}{TcO_4}^-$를 정맥주사 하였다. 10분 후 안정 상태에서 심전도를 부착한 뒤 planar와 SPECT를 연속하여 촬영하고 ADAC Laboratories, Ver. 4.20 software를 이용하여 영상을 분석하고 각각의 심박출계수를 측정하였다. 일원배치 분산분석(one-way anova) 후 사후검정(Tukey test)을 통해 평균값을 비교하고 서로 간 pearson 상관계수를 구하였다(SPSS Ver 17.0). 심박출계수의 평균값과 표준편차값은 planar에서 $56.3{\pm}13.9$ (%), SPECT에서 $60.4{\pm}16.0$ (%), 심초음파에서는 $59.1{\pm}14.4$ (%)로 유의한 차이는 없었으며(p=0.486) 이에 대한 사후 검정은 planar-심초음파 p=0.697, SPECT-심초음파 p=0.928, planar-SPECT p=0.469로 유의한 차이가 없었다. 상관관계에서는 planar-심초음파 r=0.801, SPECT-심초음파 r=0.810, planar-SPECT r=0.873 비교적 높은 상관관계를 보였다(p<0.01). 게이트혈액풀스캔 및 SPECT와 심초음파를 이용하여 구한 좌심실의 심박출계수는 높은 상관성을 보였으며 평균값에서도 유의한 차이는 없었다. 현재 게이트혈액풀스캔은 시행건수가 줄어들고 스캔의 정확성이나 재현성에 대한 문제는 남아있으며 SPECT의 경우 임상적으로 잘 적용되지 못하고 있으나 다양한 심기능 지표들을 얻을 수 있고 혈액풀스캔에서의 심박출계수와 좋은 일치율을 보이므로 심초음파를 대체할 수 있는 유용한 검사법이라 생각된다.

• 한국전산유체공학회지
• /
• 제13권4호
• /
• pp.39-44
• /
• 2008

Numerical simulations of laminar flow over a sphere are conducted to investigate the effect of the Reynolds number on the characteristics of vortex shedding. The Reynolds numbers considered are between 300 and 475, covering unsteady planar-symmetric and asymmetric flows. Results show that the unsteady planar-symmetric flow can be categorized into two different regimes: single-frequency regime and multiple-frequency regime. The former has a single frequency component due to periodic shedding of the vortices with the same strength in every shedding cycle, while the latter has multiple frequency components due to cycle-to-cycle variation in the strength of shed vortices with the shedding angle fixed. The multiple-frequency planar-symmetric flow, which is newly found in the present study, occurs at Re=330${\sim}$360 between the single-frequency planar-symmetric flow and the asymmetric flow. On the other hand, the asymmetric flow occurs at Re${\geq}$365, where the vortices shed from the sphere show variation both in strength and shedding angle unlike the planar-symmetric flow. Also, it is shown that the breaking of planar symmetry is closely related to the imbalance of vortical strength between a pair of streamwise vortices.

• 한국정보과학회논문지:시스템및이론
• /
• 제33권7호
• /
• pp.448-453
• /
• 2006

본 논문은 평면 그래프를 위한 병렬 depth-first search (DFS) 알고리즘 [SIAM J. Comput., 19 (1990) 678-704]을 비 평면일 (non-planar) 수 있는 grid 그래프의 한 종류인 solid grid 그래프에 대해서도 수행 가능하도록 확장된 알고리즘을 제안한다. 제안 알고리즘은 Priority PRAM 모델에서 $O(n/sqrt{log\;n})$개의 프로세서로 수행했을 때 O(log n)의 병렬 시간이 소요된다. 우리의 지식으로, 이는 비 평면 그래프를 위한 첫 번째 결정적 NC (deterministic NC) 알고리즘이다.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 1994년도 추계학술대회 논문집
• /
• pp.44-54
• /
• 1994

A variational formulation and the associated finite elemet equations have been derived for general three-dimensional deformation of a planar anisotropic rigid-plastic sheet metal which obeys the strain-rate potential proposed by BARLAT et al [13]. By using the natural convected coordinate system, the effect of geometric change and the rotation of planar anisotropic axes are considered efficiently. In order to check the validity of present formulation, a cylindrical cup and a square cup deep drawing test was modeled. good agreement was found between the FE simulation and the experiment. The results have shown that the present formulation for planar anisotropic deformation can be efficiently applied to the analysis of sheet metal working processes for planar anisotropic nonferrous metals.

• Ocean Systems Engineering
• /
• 제12권1호
• /
• pp.1-22
• /
• 2022

The majority of tubular joints commonly found in offshore jacket structures are multi-planar. Investigating the effect of loaded out-of-plane braces on the values of the stress concentration factor (SCF) in offshore tubular joints has been the objective of numerous research works. However, due to the diversity of joint types and loading conditions, a number of quite important cases still exist that have not been studied thoroughly. Among them are internally ring-stiffened two-planar TT-joints subjected to axial loading. In the present research, data extracted from the stress analysis of 243 finite element (FE) models, verified against available numerical and experimental data, was used to study the effects of geometrical parameters on the chord-side SCFs in two-planar tubular TT-joints reinforced with internal ring stiffeners subjected to two types of axial loading. Parametric FE study was followed by a set of nonlinear regression analyses to develop six new SCF parametric equations for the fatigue analysis and design of axially-loaded two-planar TT-joints reinforced with internal ring stiffeners.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2020년도 전력전자학술대회
• /
• pp.19-21
• /
• 2020

본 논문은 OBC의 전력 밀도를 향상시키기 위한 LLC용 planar 변압기의 설계 방법을 제안한다. 이를 위해 상용 planar 변압기 코어를 사용한 OBC를 바탕으로 planar 변압기 코어 최적 파라미터와 패턴 배치에 따른 영향을 FEM 시뮬레이션을 통해 설계하고 분석한다. 분석 결과를 바탕으로 설계된 planar 변압기를 3.3 [kW]급 LLC 컨버터 prototype을 통해 검증한다.

• Ocean Systems Engineering
• /
• 제13권2호
• /
• pp.97-121
• /
• 2023

Through-the-thickness stress distribution in a tubular member has a profound effect on the fatigue behavior of tubular joints commonly found in steel offshore structures. This stress distribution can be characterized by the degree of bending (DoB). Although multi-planar joints are an intrinsic feature of offshore tubular structures and the multi-planarity usually has a considerable effect on the DoB values at the brace-to-chord intersection, few investigations have been reported on the DoB in multi-planar joints due to the complexity of the problem and high cost involved. In the present research, data extracted from the stress analysis of 243 finite element (FE) models, verified based on available parametric equations, was used to study the effects of geometrical parameters on the DoB values in two-planar tubular DYT-joints. Parametric FE study was followed by a set of nonlinear regression analyses to develop six new DoB parametric equations for the fatigue analysis and design of axially loaded two-planar DYT-joints.