• ETRI Journal
• /
• 제31권1호
• /
• pp.71-73
• /
• 2009

In this letter, novel antennas with two spiral elements are presented for ultra-wideband application. The original antenna consists of a T-shaped microstrip feed line, two spiral radiating elements, and a ground plane with two circular slots. It measures 30 mm ${\times}$ 40 mm ${\times}$ 1.6 mm. Spiral elements are used to increase the lower bandwidth limit. To further reduce the size of the antenna, the original antenna is cut in half by using the symmetry of the surface current distributions. The proposed antennas feature omnidirectional radiation patterns and good gain flatness.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2003년도 춘계학술대회
• /
• pp.1065-1068
• /
• 2003

The nano imprint process is one of the next generation lithography has been mentioned as one of major nanoreplication techniques because it is simple process, low cost, high replication fidelity and relatively high throughput. This process requires a surface contact between a template with patterns and a wafer on a stage. After contact, the vertical moving the template to the wafer causes some directional motions of the stage. Thus the stage must move according to the motions of the template to avoid the damage of the transferred patterns on the wafer. This study is to develop the wafer stage with a passive compliance to overcome the damage. This stage is designed with the concept like that it has a monolithic, symmetry and planar 6-DOF mechanism.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2008년도 춘계학술대회논문집
• /
• pp.284-287
• /
• 2008

Flow over a sphere under forced oscillation at Re=300 is simulated for various frequency ratios which are defined as excitation frequency over natural frequency of stationary sphere. The results of oscillating sphere are compared with those of stationary sphere and an oscillating cylinder. Detailed vortical structures, hydrodynamic forces and frequencies of the wake are prescribed as a function of frequency ratio. For oscillating sphere, planar symmetry of the wake is kept and two nearly symmetric hair pin vortices are induced by oscillation for one period of oscillation when the frequency ratio is bigger than 0.5. Modulation phenomenon which can be found in an oscillating cylinder were not seen for an oscillating sphere.

• 대한자기공명의과학회:학술대회논문집
• /
• 대한자기공명의과학회 2002년도 제7차 학술대회 초록집
• /
• pp.76-76
• /
• 2002

Purpose： The purpose of this study is to optimize the configuration of body RF coil composed of 4 planar subcoils for low field open MRI. Method： Our low field RE coil is composed of 4 subcoils assumed to be located at both the bottom and top sides of permanent magnet. Each subcoils has 3 main strips. The coil system has mirror inversion symmetry. First, the currents on the strips are obtained by inductance calculation and circuit analysis, Second, all the strips are divided into line strip elements across the strips, the self Inductances of line strip elements and the mutual inductances among the line strip elements are calculated, and current distributions of strip are obtained by circuit analysis, where each strip is considered as parallel combination of line strip elements. Finally all the line strip elements are segmented, magnetic field has been calculated by pseudo electric dipole radiation method, where the current elements are regarded as pseudo electric dipole radiation sources. We have performed above procedures for various configurations of RE coil. The field homogeneity is calculated in the 25 cm DSV.

• Journal of electromagnetic engineering and science
• /
• 제8권1호
• /
• pp.12-16
• /
• 2008

In this paper, we introduce a coupling, which is achieved through the aperture instead of the conventional edge coupling, so that the bandpass filter is reduced less than half in size compared to conventional planar type. The resulting filter configuration has a near two-fold symmetry, where the aperture coupling is used in the middle of the coupling stages. We designed a bandpass filter using two tapped hairpin resonators, of which the order becomes four. The designed bandpass filter has the size of $8.9{\times}18.3\;mm$. It has the return loss better than 17dB and the insertion loss of less than 5 dB in overall passband. The measured results show good agreements with simulated ones.

• Bulletin of the Korean Chemical Society
• /
• 제15권11호
• /
• pp.996-1000
• /
• 1994

Ab initio calculations with various basis sets have been carried out to investigate the geometries and ring inversion barrier of $R_2TiC_3H_6\;and\;R_2TiS_3$, R=Cp and Cl. Optimized geometries of $R_2TiC_3H_6$ showed the four membered ring was planar on Cs symmetry. However, $R_2TiS_3$ complexes were optimized to be stable in the puckered form. The smallest Basis III with STO-3G on Cp ligands gave reasonable results for the calculations of metallocene. The energy barrier for the ring inversion of metallacyclosulfanes, $Cp_2TiS_3$ was computed to be 8.72 kcal/mol at MP2 level. For the Cl system, we reproduced the molecular structure and ring inversion energy with Basis V.

• Bulletin of the Korean Chemical Society
• /
• 제15권1호
• /
• pp.37-45
• /
• 1994

$(NH_4)_{4.5}[H_{3.5}{\alpha}-PtMo_6O_{24}]{\cdot}1.5\;H_2O(A),\;(NH_4)_4[H_4{\beta}-PtMo_6O_{24}]{\cdot}1.5\;H_2O(B),\;and\;K_{3.5}[H_{4.5}{\alpha}-PtMo_6O_{24}]{\cdot}3\;H_2O(C)$ have been synthesized and their molecular structures have been also determined by single-crystal X-ray diffraction technique. The space groups, unit cell parameters, and R factors are as follows: Compound A, monoclinic, $A_{2/a}$, a= 19.074 (3), b=21.490 (3), c=15.183 (2) ${\AA};\;{\beta}$=109.67 (1) ${\AA}$; z=8; R=0.075($IF_0I>4{\sigma}(IF_0I);$ Compound B, triclinic, P$bar{1}$, a=10.776 (2), b=15.174 (4), c=10.697 (3) ${\AA};\;{\alpha}$ =126.29 (2), ${\beta}$=111.55 (2), ${\gamma}$=93.18 (2) ${\AA}$; Z=2; R=0.046($IF_0I>3{\sigma}(IF_0I);$): Compound C, triclinic, Pl, a=12.426 (2), b=13.884 (2), c=10.089 (1) ${\AA}$; ${\alpha}$=102.59 (2), ${\beta}$=110.73 (1), ${\gamma}$=53.93 (1) ${\AA}$; Z=2; R=0.074 ($IF_0I>3{\sigma}(IF_0I)$. Compounds A and C contain the well-known Anderson structure (planar structure) heteropoly oxometalate having approximate $bar{3}_m(D_{3d})$ symmetry, while compound B contains the bent structure heteropoly oxometalate having appproximate $2_{mm}(C2_v)$ symmetry. The bent structure and the planar one are geometrical isomers. These compounds are rot only novel heteroply molybdates containing platinate(IV) but also the first example of geometrical isomerism in the hexamolybdoheteropoly oxometalates. That isomerization surprisingly occurred because of the change of only 0.5 non-acidic hydrogen atom attached to the polyanion such as $[H_{3.5}{\alpha} -PtMo_6O_{24}]^{4.5-}{\to}[H_4{\beta}-PtMo_6O_{24}]^{4-}{\to}[H_{4.5}{\alpha} -PtMo_6O_{24}]^{3.5-}$. It seems that the gradual protonation of the polyanion plays an important role in that isomerism. These heteropolyanions form dimers by strong hydrogen bonds between two heteropolyanions in the respective crystal system.

• 대한화학회지
• /
• 제36권4호
• /
• pp.536-539
• /
• 1992

8원자-고리를 가지고 있는 Spiro Orthocarbonate(C$_{25}H_{20}O_4$)의 분자 및 결정구조를 X-선법으로 연구하였다. 이 결정은 단사정계이고 공간군은 C2/c이다. 단위세포 길이는 a = 15.319(4), b = 9.057(3), c = 13.168(3)${\AA}$이며, ${\beta}$값은 98.53(3)$^{\circ}$이고 Z = 4이다. 회절 반점들의 세기는 흑연 단색화 장치가 있는 자동 4축회절기로 얻었으며 Mo-K${\alpha}$ X-선(${\lambda}$ = 0.7107 ${\AA}$)을 사용하였다. 분자구조는 직접법으로 풀었으며 최소자승법으로 정밀화 하였고, 최종 신뢰도 R값은 1412개의 회전반점에 대하여 0.052였다. 분자는 C$_2$ 점군에 속하는 대칭성을 갖고 있다. 8원자-고리의 형태는 pseudo-C$_s$ symmetry를 갖는 의자형이다. 두 개의 나프탈렌 고리들은 서로 거의 직각을 이루며 고리내의 C-C 결합길이는 1.352∼1.444${\AA}$범위에 있고 내부결합 각도는 117.2∼123.1$^{\circ}$범위에 있다. 8원자-고리의 영향으로 C(1)-C(9), C(8)-C(9) 그리고 C(9)-C(10)이 다른 C-C 결합길이 보다 약간 길다.

• 대한디지털의료영상학회논문지
• /
• 제12권2호
• /
• pp.139-143
• /
• 2010

Two-dimensional(2D) images like Multi Planar Reconstruction(MPR) Image or Maximum Intensity Projection(MIP) were used for the purpose of diagnosis, but MPR image's quality were limited due to its superior limit of Z-axis ability to produce permitted radiation exposure virtuous in the permitted time limit from the existing Spiral CT. However, in company with the development of the Multi Detector Computed Tomography(MDCT), we were able to get the Data with the equal amount of Voxel, also get varied reconstructions as in the aspect of our needs. This present study propose a reconstruction technique which is to extract a field using Region of interest(ROI) segmentation method for improvement of the quality of the medical image and after that reconstruct the concerned part using the four-directed symmetry method of the oval, than using the reconstructed data, reorganize the image by using the Curved MPR method. If current proposed method is used, it is highly effective because of its ability to accurately display the disease concerned part, which will reduce the decoding time and also effectively provide information based on the accuracy of the decode.

• Bulletin of the Korean Chemical Society
• /
• 제13권4호
• /
• pp.375-381
• /
• 1992

In this study we have synthesized two spiro orthocarbonates, which can be polymerized with volume expansion, and determined their crystal structures. The crystal data are as follows; 3,4,10,11-Di(9,10-dihydro-9,10-ethanoanthracenyl)- 1,6,8,13-tetraoxa-6.6-tridecane 5: a = 16.898 (1), b = 9.299 (1), c = 24.359 (2) ${\AA}$, $\beta$ = 123.73 $(7)^{\circ}$, space group P21/c and R = 0.073 for 2954 reflections; compound 8: a = 15.244 (4), b = 15.293 (3), c = 10.772 (3) $\AA$, ${\beta}$ = 99.45 $(2)^{\circ}$, space group P21/c and R = 0.082 for 2346 reflections. The seven-membered rings of compound 5 are chair forms and all the six-membered rings are boat shaped. For a six-membered spiro orthocarbonate, 3,9-Di(9-fluorenylidenyl)-1,4,6,9-tetraoxa-5,5-und ecane 8, fluorene groups [C(1) atom through C(13) atom] are planar within ${\pm}0.09{\AA}$ and the six-membered rings have chair conformations. The whole molecule has pseudo-C2 symmetry. The water molecules in the crystal are linked with each other through the hydrogen bond with distance of 2.790 (20) ${\AA}$.