• 한국세라믹학회:학술대회논문집
• /
• 한국세라믹학회 2003년도 춘계총회 및 연구발표회 초록집
• /
• pp.143.2-143
• /
• 2003

• 한국광학회지
• /
• 제16권3호
• /
• pp.196-200
• /
• 2005

[ $0.75delta\%$ ]의 평판광회로(PLC;Planar Lightwave Circuit)소자의 설계 및 제작기술을 가지고 저손실과 높은 누화율을 가진 파장 다중화 및 역다중화 소자를 개발하였다. C-band AWG(Arrayed Waveguide Grating)에서의 삽입손실은 2.503이하, 누화율은 35dB이상, 균일도는 1dB이하이며 L-band에서는 Vernier 디자인을 적용하여 ITU-T의 파장 정확도가 0.04nm이하가 되도록 제작하였다.

• 한국전기전자재료학회논문지
• /
• 제18권12호
• /
• pp.1106-1110
• /
• 2005

We fabricated (110) silicon hard master by using anisotropic wet etching for embossing. The etching chemical for the silicon wafer was a TMAH $25\%$ solution. The anisotropic wet etching produces a smooth sidewall surface and the surface roughness of the fabricated master is about 3 nm. After spin coating an organic-inorganic sol-gel hybrid material on a silicon substrate, we employed hot embossing technique operated at a low pressure and temperature to form patterns on the silicon substrate by using the fabricated master. We successfully fabricated the multi-mode planar optical waveguides showing low propagation loss of 0.4 dB/cm. The surface roughness of embossed patterns was uniform for more than 10 times of the embossing processes with a single hydrophobic surface treatment of the silicon hard master.

• 센서학회지
• /
• 제27권1호
• /
• pp.25-30
• /
• 2018

Closed-form analytical expressions and 3-dimensional normalized charts for the homogeneous sensing and surface sensing structures are derived to provide the conditions for the maximum sensitivity of integrated-optic biosensors based on evanescent-wave and stepindex planar optical waveguides. The analysis is made for transverse electric (TE) polarization mode, in both cases where the measurand is homogeneously distributed in the cover (namely, homogeneous sensing), and where it is an ultrathin film on the waveguide-cover interface (namely, surface sensing).

• ETRI Journal
• /
• 제31권2호
• /
• pp.228-230
• /
• 2009

InP-based planar waveguide 48-channel concave grating demultiplexers with a channel spacing of 0.8 nm (100 GHz) are described and demonstrated. Polarization insensitivity and flattened spectral response are successfully achieved by the introduction of a polarization compensator and a two-focus grating, respectively. The fabricated device shows a polarization-dependent wavelength shift of less than 20 pm and a -3 dB spectral width of about 0.55 nm (68.75 GHz) over all channels.

• 한국전기전자재료학회논문지
• /
• 제11권10호
• /
• pp.903-910
• /
• 1998

Ti:LiNbO$_3$ optical waveguides have been fabricated by Ti-diffusion in wet oxygen atmosphere. The fabrication conditions of furnace temperature, diffusion time and bubbler temperature were 105$0^{\circ}C$, 8 hours and 9$0^{\circ}C$, respectively and Ti thickness was varied from 700$\AA$ to 1500$\AA$. In this paper, the nearfield patterns, mode sizes (hirizontal/vertical) and insertion loss of waveguides were discussed at wavelength 1550 nm ad function of Ti thickness. With the planar waveguide, the effective index change and diffusion depth were calculated at 632.8nm using the prism coupling method. From these results, the best Ti thickness in our conditions seems like to by 1200$\AA$~1300$\AA$.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2012년도 제43회 하계 정기 학술대회 초록집
• /
• pp.67-67
• /
• 2012

Graphene, two-dimensional one-atom-thick planar sheet of carbon atoms densely packed in a honeycomb crystal lattice, exhibits fascinating electrical properties, such as a linear energy dispersion relation and high mobility in addition to a wide-range optical absorption and high thermal conductivity. Graphene's outstanding tensile strength allows graphene-based electronic and photonic devices to be flexible, bendable, or even stretchable. Recently many groups have reported high performance electronic and optoelectronic devices based on graphene materials, i.e. field-effect transistors, gas sensors, nonvolatile memory devices, and plasmonic waveguides, in which versatile properties of graphene materials have been incorporated into a flexible electronic or optoelectronic platform. However, there are several fundamental or technological hurdles to be overcome in real applications of graphene in electronics and optoelectronics. In this tutorial we will present a short introduction to the basic material properties and recent progresses in applications of graphene to electronics and optoelectronics and discuss future outlook of graphene-based devices.

• 대한전자공학회논문지SD
• /
• 제47권4호
• /
• pp.20-25
• /
• 2010

평판형 rib 도파로의 설계 및 공정기술을 바탕으로 632.8 nm에서 동작하는 집적 마흐젠더 간섭계 센서(Mach-Zehnder interferometric sensor)를 제작하였다. 단일모드와 높은 감도의 두 가지 조건을 고려하여 실리카 계열($SiO_2-SiO_xN_y-SiO_2$) rib 도파로를 설계하였고 박막증착, 사진제판, RIE (Reactive Ion Etching)와 같은 반도체 공정들을 이용해 그 기하학적 구조를 구현하였다. 제작된 rib 도파로의 광출력을 cut-back방법으로 분석한 결과, 약 4.82 dB/cm의 전파손실을 측정하였다. 동시에 크롬 식각방지 층 공정을 도입하여 마흐젠더 간섭계 칩 위에 감지영역(sensing zone)을 형상화할 때 발생하는 코어 층 손상을 방지하였다. 제작된 마흐젠더 간섭계 센서를 이용한 증류수/에탄올 혼합물 굴절률 측정실험을 통해 약 $\pi$/($4.04{\times}10^{-3}$)의 소자 감도(sensitivity)를 최종 확인하였다.

• 한국고분자학회:학술대회논문집
• /
• 한국고분자학회 2006년도 IUPAC International Symposium on Advanced Polymers for Emerging Technologies
• /
• pp.309-309
• /
• 2006

Latest developments on hybrid nanostructured materials fabricated by applying self-assembly strategies on organic/inorganic nanotemplates are discussed. Within this frame, numerous functional nanomaterials including arrays of composite metal/semiconductor nanoparticles, planar waveguides and functional multilayer thin films are generated using self-assembled polymers as templates or building blocks. In particular, surface plasmon resonance based optical sensing is employed to investigate nanofabrication processes occurring in nanoscale dimention. We also suggest unprecedented pathways to hybrid supramolecular multilayer nanoarchitectures in 1D or 2D geometry via layer-by-layer self-assembly.

• Journal of the Optical Society of Korea
• /
• 제15권4호
• /
• pp.403-406
• /
• 2011

Here we report Airy beams coupled with waveguide modes. These waveguide Airy (WAiry) beams propagate through layered planar structures inheriting the characteristics of waveguide modes as well as those of Airy beams, such as diffraction-free and accelerating features. In particular, we focus on the WAiry beams associated with backward waveguide modes, showing that the backward feature can alter the trajectories of the WAiry beams significantly. Based on this, we propose a new scheme of waveguide-type polarization/power beam splitters.