• Journal of Electrical Engineering and Technology
• /
• 제7권4호
• /
• pp.558-563
• /
• 2012

In this paper, a novel planar type magnetic levitation system without other assistant devices is proposed and it can move with 6 degree of freedom (X, Y, Z, ${\theta}_X$, ${\theta}_Y$, ${\theta}_Z$) in wafer size as well as in nano scale positioning.The mover is composed with 2-D Halbach permanent magnet array and the stator is composed with $10{\times}10$ coil arrays.It was composed in laboratory and tested with short stroke (4 [mm]) and long stroke (160 [mm])movements. The errors of short movement test is [X, Y, Z, ${\theta}_X$, ${\theta}_Y$, ${\theta}_Z$]${\leq}$ [${\pm}200nm$, ${\pm}200nm$, ${\pm}250nm$, ${\pm}3urad$, ${\pm}2urad$, ${\pm}1urad$]The errors of long stroke movement test is [X, Y, Z, ${\theta}_X$, ${\theta}_Y$, ${\theta}_Z$]${\leq}$ [${\pm}200nm$, ${\pm}200nm$, ${\pm}250nm$, ${\pm}1.5urad$, ${\pm}2urad$, ${\pm}0.5urad$].

• 비파괴검사학회지
• /
• 제30권6호
• /
• pp.569-577
• /
• 2010

Nonplanar surface geometries of components are frequently encountered in real ultrasonic inspection situations. Use of rigid array transducers can lead to beam defocusing and reduction of defect image quality due to the mismatch between the planar array and the changing surface. When a flexible array is used to fit the complex surface profile, the locations of array elements should be known to compute the delay time necessary for adaptive heam focusing. An alternative method is to employ the time reversal focusing technique that does not require a prior knowledge about the properties and structures of the specimen and the transducer. In this paper, a time reversal method is applied to simulate beam focusing of flexible arrays and imaging of point-like defects contained in specimens with nonplanar surface geometry. Quantitative comparisons are made for the performance of a number of array techniques in terms of the ability to focus and image three point-like reflectors positioned at regular intervals. The sinusoidal profile array studied here exhibits almost the same image quality as the flat, reference case.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2003년도 추계학술대회논문집
• /
• pp.735-741
• /
• 2003

A simplified view of array design and application process was introduced. Array design is critical to achieve a successful phased array measurements. A planar microphone array is designed to produce optimum performance and also to fit economic requirement in integrating data acquisition system. Certain performance characteristics are of primary concern when designing arrays. These characteristics include array resolution, spatial aliasing and array sidelobe suppression. Every array has its directional pattern that shows such characteristics. Assuming that a monopole source is located in center, beam-patterns have been simulated varying measurement conditions such as number of sensors. array aperture size, distance between array and source, frequency of interest and so on. Sensor correction was conducted on very channel using magnitudes and phased of FRF with respect to a reference microphone channel. Then with a spiral type array, measurements have been made with two point sources of same frequency in order to investigate array resolving abilities. It is observed that higher frequency source achieves better resolution than lower one does.

• 센서학회지
• /
• 제14권3호
• /
• pp.137-143
• /
• 2005

Research in the field of biosensor has enormously increased over the recent years. The metal-oxide semiconductor field effect transistor (MOSFET) type protein sensor offers a lot of potential advantages such as small size and weight, the possibility of automatic packaging at wafer level, on-chip integration of biosensor arrays, and the label-free molecular detection. We fabricated MOSFET protein sensor and proposed the gold-black electrode as the gate metal to improve the response. The experimental results showed that the output voltage of MOSFET protein sensor was varied by concentration of albumin proteins and the gold-black gate increased the response up to maximum 13 % because it has the larger surface area than that of planar-gold gate. It means that the expanded gate allows a larger number of ligands on same area, and makes the more albumin proteins adsorbed on gate receptor.

• Journal of electromagnetic engineering and science
• /
• 제10권4호
• /
• pp.309-315
• /
• 2010

A dual-band dual-polarized microstrip antenna array for an advanced multi-function radio function concept (AMRFC) radar application operating at S and X-bands is proposed. Two stacked planar arrays with three different thin substrates (RT/Duroid 5880 substrates with $\varepsilon_r$=2.2 and three different thicknesses of 0.253 mm, 0.508 mm and 0.762 mm) are integrated to provide simultaneous operation at S band (3~3.3 GHz) and X band (9~11 GHz). To allow similar scan ranges for both bands, the S-band elements are selected as perforated patches to enable the placement of the X-band elements within them. Square patches are used as the radiating elements for the X-band. Good agreement exists between the simulated and the measured results. The measured impedance bandwidth (VSWR$\leq$2) of the prototype array reaches 9.5 % and 25 % for the S- and X-bands, respectively. The measured isolation between the two orthogonal polarizations for both bands is better than 15 dB. The measured cross-polarization level is ${\leq}-21$ dB for the S-band and ${\leq}-20$ dB for the X-band.

• Applied Microscopy
• /
• 제45권3호
• /
• pp.155-169
• /
• 2015

Plastic deformation was introduced to the austenitic (${\gamma}$) stainless steel of SS304 by air blast shot peening, ultrasonic shot peening, and ultrasonic nanocrystalline surface modification. Various deformation structures were formed. The hardness, the deformation structure and the underlying grain refinement mechanism were investigated. In the deformed region, planar dislocation arrays and deformation twin (DT), the DT-DT intersection and ${\varepsilon}$-martensite structures, and ${\alpha}^{\prime}$-martensite were formed in the respective regions of low, medium, and high strain. The grain refinement mechanism is found to be closely related to the 1) sub-division of coarse grains by DT, shear bands and their intersection, and 2) formation of nano-sized ${\alpha}^{\prime}$-martensite due to the high plastic deformation.

• 한국전자파학회논문지
• /
• 제22권11호
• /
• pp.1133-1136
• /
• 2011

본 논문에서는 ISM(산업/과학/의료) 대역(2.4~2.5 GHz)에서 IEEE 802.11b/g 적용을 위한 스트립라인 구조의 코리니어 안테나를 제안하였으며, 이는 동축 코리니어 안테나와 전 방향 평면 마이크로스트립 안테나(OMA)의 단점을 보완한 것이다. 4층 PCB 구조를 이용하여 기존 안테나에 비해 개선된 특성과 제작상의 이점을 가질 수 있었다. 안테나 배열을 위해 안테나 소자들의 외부 도체와 내부 도체를 ${\lambda}$/2 길이로 서로 엇갈리게 연결하여 동위상을 갖는 구조를 가지며, 상대 유전율 4.4, 손실 탄젠트(loss tangent) 0.02인 FR4 epoxy 기판을 이용하여 제작하였다. 최대 이득은 약 4.93 dBi가 측정되었으며, 기존 OMA 구조에 비하여 이득은 약 0.33 dBi 개선된 결과를 얻었다.

• 한국재료학회지
• /
• 제23권12호
• /
• pp.667-671
• /
• 2013

We present an easy method of preparing two-dimensional (2D) periodic hollow tin oxide ($SnO_2$) hemisphere array gas sensors using polystyrene (PS) spheres as a template. The structures were fabricated by the sputter deposition of thin tin (Sn) metal over an array of PS spheres on a planar substrate followed by calcination at an elevated temperature to oxidize Sn to $SnO_2$ while removing the PS template cores. The $SnO_2$ hemisphere array structures were examined by scanning electron microscopy and X-ray diffraction. The structures were calcined at various temperatures and their sensing properties were examined with varying operation temperatures and concentrations of nitric oxide (NO) gas. Their gas-sensing properties were investigated by measuring the electrical resistances in air and the target gases. The measurements were conducted at different NO concentrations and substrate temperatures. A minimum detection limit of 30 ppb, showing a sensitivity of S = 1.6, was observed for NO gas at an operation temperature of $150^{\circ}C$ for a sample having an Sn metal layer thickness corresponding to 30 sec sputtering time and calcined at $600^{\circ}C$ for 2 hr in air. We proved that high porosity in a hollow $SnO_2$ hemisphere structure allows easy diffusion of the target gas molecules. The results confirm that a 2D hollow $SnO_2$ hemisphere array structure of micronmeter sizes can be a good structural morphology for high sensitivity gas sensors.

• ETRI Journal
• /
• 제38권5호
• /
• pp.981-987
• /
• 2016

We present a cost-effective dual polarization quadrature phase-shift coherent receiver module using a silica planar lightwave circuit (PLC) hybrid assembly. Two polarization beam splitters and two $90^{\circ}$ optical hybrids are monolithically integrated in one silica PLC chip with an index contrast of $2%-{\Delta}$. Two four-channel spot-size converter integrated waveguide-photodetector (PD) arrays are bonded on PD carriers for transverse-electric/transverse-magnetic polarization, and butt-coupled to a polished facet of the PLC using a simple chip-to-chip bonding method. Instead of a ceramic sub-mount, a low-cost printed circuit board is applied in the module. A stepped CuW block is used to dissipate the heat generated from trans-impedance amplifiers and to vertically align RF transmission lines. The fabricated coherent receiver shows a 3-dB bandwidth of 26 GHz and a common mode rejection ratio of 16 dB at 22 GHz for a local oscillator optical input. A bit error rate of $8.3{\times}10^{-11}$ is achieved at a 112-Gbps back-to-back transmission with off-line digital signal processing.

• 한국전자통신학회논문지
• /
• 제15권4호
• /
• pp.643-650
• /
• 2020

위상 배열 안테나는 다수개의 안테나 소자를 선형 혹은 평면(격자형 혹은 원형)으로 배열하여 각 소자에 대한 위상을 전자적으로 제어하여, 안테나의 기계적인 회전 없이 빔의 신속한 지향이 가능하다는 장점이 있다. 평면 배열 안테나는 주로 격자형 배열과 원형 배열을 사용하는데, 원형 배열이 구조적 특성상 격자형에 비해 높은 분해능을 가진다. 그러나 많은 요소를 사용하는 원형 배열의 경우 전체 배열의 반지름이 증가되어, 제한된 면적에서는 반지름이 각기 다른 다수개의 원형 배열을 가지는 동심원 배열(CCA : Concentric Circular Array or CRA : Concentirc Ring Array)을 사용하게 된다. 본 논문에서는 동심원 배열 안테나를 적용한 적응 빔형성 위성 시스템에서의 도래각 추정기를 소개하고 성능분석 결과를 제시한다. 또한, 원형 배열 안테나를 적용한 경우와의 성능을 비교/분석한다.