• Journal of the Korean Society of Industry Convergence
• /
• v.24 no.1
• /
• pp.45-51
• /
• 2021

The purpose of this study is to suggest the optimal shape for a local air ventilation system for fume removal, which is operated in a zinc galvanizing factory, and to propose the improvement plan for a ventilation system used in a zinc galvanizing factory through flow analysis. A part of the air sprayed by an air curtain goes out. It will be necessary to research the position of an air curtain, its spray angles, and its nozzle shape. In addition, additional research needs to be conducted on the shape of the fan installed before a hood in order to make it easy to induce fume. In a local air ventilation system, air is inhaled from the outside. The higher an inlet negative pressure is, the easier fume is removed. It was found that it was necessary to install an appropriate hole in the wall on the back of a push nozzle in order to reduce an inlet negative pressure.

• Bulletin of the Society of Naval Architects of Korea
• /
• v.9 no.1
• /
• pp.1-6
• /
• 1972

To contribute towards more accurate estimation of the virtual coefficient for the vertical vibration of the chine-type ship, experimentally obtained three-dimensional correction factors, J, of added mass of prismatic beams having cross section shape of hypotrocoid characters, slightly concaved Lewis form and elliptic form are investigated in connection with the applicability of an approximate analytical calculation method compared to that proposed by T. Kumai[6] for the Lewis form cylinders, and synthetically in compared with the experimental works on various cross section shapes of the other type by L.C. Burril et al[8] and the analytical works on the ellipsoid of revolution by F.M. Lewis[1] and J.L. Taylor[2]. The experimental results show that the aforementioned analytical method gives, unlike that for the Lewis form cylinders, considerably larger J-values for the chine-type cylinders, and that the influence of the character of the cross section shape on J-values is not remarkable in practical sense. Finally, considering in synthesis the experimental results on prismatic beams, the Burril's works on palabolic plan form and elliptic plan form, and that the chine-type ship usually has a hull form of transom stern, it is fairly safe to say, at the present stage, that adoptation of the Taylor's J-values will not results in any large error in estimation of the virtual inertia coefficients of the chine-type ships.

• Journal of the Korean Institute of Rural Architecture
• /
• v.14 no.3
• /
• pp.109-119
• /
• 2012

This study aims to analyze architectural characteristics of railway station facilities which were built with development of railroads from Japanese Colonial Period to 1950's. To achieve this goals, 7 railway stations in Gyeongju area that are worth preserving were set up as research targets. For this study, I analyzed literature of the railway station and drawings which the KORAL Daegu Branch is keeping. Railway stations without a construction drawing investigated a direct visit. After analyzing the railway station facilities, the architectural properties such as plan, elevation and section have been identified. The results are as follows. First, Each modern railway station is usually consisted of waiting room and office, and ancillary spaces have been added. Over the years, however, the space was expanded horizontally. In that case, the structure and finish materials have been changed, like now. Second, Most of the roof shape is 'Matbae'(gable roof), especially Gyeongju station and Bulguksa Station are 'Woojingak roof. The roof structure is truss structure, especially as Pratt and Scissors type, but Gyeongju Station's structure is a reinforced concrete. Third, main doorway of waiting room is located in the center of the front gable. However, small stations like 'Ahwa' and 'Ipsil' station to ensure the passengers' waiting area are placed next to the office area.

• Wind and Structures
• /
• v.19 no.5
• /
• pp.523-540
• /
• 2014

This paper presents a comprehensive study of pressure developed on different faces of a 'Y' plan shape tall building using both numerical and experimental means. The experiment has been conducted in boundary layer wind tunnel located at Indian Institute of Technology Roorkee, India for flow condition corresponding to terrain category II of IS:875 (Part 3) - 1987, at a mean wind velocity of 10 m/s. Numerical study has been carried out under similar condition using computational fluid dynamics (CFD) package of ANSYS, namely ANSYS CFX. Two turbulence models, viz., $k-{\varepsilon}$ and Shear Stress Transport (SST) have been used. Good conformity among the numerical and experimental results have been observed with SST model yielding results of higher magnitude. Peculiar pressure distribution on certain faces has been observed due to interference effect. Furthermore, flow pattern around the model has also been studied to explain the phenomenon occurring around the model.

• Proceedings of the Korean Society of Surveying, Geodesy, Photogrammetry, and Cartography Conference
• /
• 2009.04a
• /
• pp.15-17
• /
• 2009

The line simplification method based on the turning function is studied in this paper for conversion of ground plan data to geospatial data to update the digital map. This method eliminate vertices effectively by estimating the length and the angle between the vertices based on the turning function which is useful to express the shape of linear feature. As the result, this method shows high shape similarity, high elimination rate of vertices and 100% of satisfaction degree to the drawing rules. Thus this line simplification method is judged to be effective in updating the digital map with ground plans.

• Proceeding of Spring/Autumn Annual Conference of KHA
• /
• 2006.11a
• /
• pp.208-211
• /
• 2006

This study was to find out contemporary planning trends of rural houses in Na-po Munhwa village by analyzing their floor plan shapes and space relations & elements. There were built 240 houses in that village, but it were possible to collect housing data, floor plans & general building records of 120 houses, from house register. By analyzing those data, findings were as follows : 1) Floor plan shapes of rural houses had a tendency to 'ㅋ' shape type than simple box or transformed box types, and Room-Living-Room arrangement of centered living were very strong trends in those plans. 2) Public spaces, L.D.K

• Wind and Structures
• /
• v.31 no.5
• /
• pp.431-443
• /
• 2020

The modern tall buildings are often constructed as an unconventional plan and as twin buildings. Wind load on the tall building is significantly influenced by the presence of another building in the near vicinity. So, it is imperative to study wind forces on an unconventional plan shaped tall building. Mean wind pressure coefficients of a square and 'H' plan shape tall buildings are investigated using wind tunnel experiments. The experiments were carried out for various wind directions from 00 to 900 at an interval of 300 and various locations of the identical interfering building. The experimental results are presented at the windward face from the viewpoint of effects on cladding design. To quantify the interference effects, interference factors (I.F) are calculated. Mean pressure coefficients of both models are compared for isolated and interference conditions. The results show that pressure reduces with an increase in wind angle till 600 wind direction. The interfering building at full blockage interference condition generates more suction than the other two conditions. The interference factor for both models is less than unity. H-plan building model is subjected to a higher pressure than the square model.

• Animal Systematics, Evolution and Diversity
• /
• v.30 no.3
• /
• pp.183-190
• /
• 2014

The four species of the family Dendrophylliidae are newly recorded in Korea: Balanophyllia (Balanophyllia) cumingii Milne Edwards and Haime, 1848, Balanophyllia (Balanophyllia) vanderhorsti Cairns, 2001, Cladopsammia eguchii (Wells, 1982), and Cladopsammia gracilis (Milne Edwards and Haime, 1848). The two genera of Balanophyllia and Cladopsammia, to which the four species belong, are newly recorded in Korea. They were collected from the subtidal zones in Jeju-do Island, Korea by SCUBA diving from 1987 to 2012. This study aims to identify the four dendrophyllid species based on external and internal morphological characters including growth form, size, budding, and color of colonies, shape and size of corallites, columella, theca, and septa. Balanophyllia (Balanophyllia) cumingii is distinguished by its solitary growth form, small and low subturbinate corallite with enlarged calice, and expanded basal part, exsert first and second septa, and Pourtal$\acute{e}$s plan. Balanophyllia (Balanophyllia) vanderhorsti is characterized by its quasi-colonial growth form, subturbinate corallites with compressed calice, thick theca, and Pourtal$\acute{e}$s plan. Cladopsammia eguchii is characterized by its phaceloid growth form of compressed corallites basally united with common coenosteum, flat spongy columella, thick theca, and Pourtal$\acute{e}$s plan. Cladopsammia gracilis is distinguished by its phaceloid growth form of corallites basally united with common coenosteum, and pronounced Pourtal$\acute{e}$s plan forming flower patterns.

• Journal of the Korean housing association
• /
• v.18 no.5
• /
• pp.23-32
• /
• 2007

This study was to find out contemporary planning characteristics of rural houses in Na-po Munhwa village by analyzing their floor plans. These results were then compared with apartment housing trends. 240 houses were built in that village, but it was only possible to collect housing data, floor plans and general building records from 102 houses, using house registers. By analyzing those data, the findings were as follows: 1) Floor plan shapes of rural houses showed a tendency to words a 'ㅋ' shape, a 3bay or a transformed 3 bay and a "room-living-room" space arrangement of a centered living room. Public spaces (L.D.K) were separately planned DK from livingroom. Living space was very open and the DK space had created visual privacy from the entrance. The Anbang (master bedroom) and living space were set to the front of the floor plan and an interior toilet was planned in them. These floor-planning tendencies were similar to trend apartment houses in urban areas. 2) Utility and Balcony spaces as a support space of kitchen were not popular features of rural houses in the Munhwa village. These results were different from urban apartment housing trends. 5) Storage space practically absent in those rural houses, and this was similar to urban the trends in urban apartment houses.

• Wind and Structures
• /
• v.34 no.4
• /
• pp.321-334
• /
• 2022

Irregularity in plan shape is very common for any type of building as it enhances better air ventilation for the inhabitants. Systematic opening at the middle of the facades makes the appearance of the building plan as a butterfly one. The primary focus of this study is to forecast the force, moment and torsional coefficient of a butterfly plan shaped tall building. Initially, Computational Fluid Dynamics (CFD) study is done on the building model based on Reynolds averaged Navier Stokes (RANS) k-epsilon turbulence model. Fifty random cases of irregularity and angle of attack (AOA) are selected, and the results from these cases are utilised for developing the surrogate models. Parametric equations are predicted for all these aerodynamic coefficients, and the training of these outcomes are also done for developing Artificial Neural Networks (ANN). After achieving the target acceptance criteria, the observed results are compared with the primary CFD data. Both parametric equations and ANN matched very well with the obtained data. The results are further utilised for discussing the effects of irregularity on the most critical wind condition.