• Korean Institute of Interior Design Journal
• /
• no.16
• /
• pp.190-201
• /
• 1998

The purpose of this study is to consider the correlational factors of space sections based on the fact the exhibition space plays an important role as a medium of displaying art works. And an another purpose is to investigate the characteristics of various types of exhibition unite space from which In intend to suggest basic sources of exhibition design. I classified domestic and foreign museum which are chosen as objects of study according to form and shape of a section plan. Then comparing exhibition space's form and scale exhibited genre lighting system layout composition display and its correlation with an already established thesis on museum architecture I will infer the characteristics of each type of a space. From these studies proper display conditions requested at the museum are different from the genre and property of the exhibited objects. And lighting system display angel of view and appreciation type affect the exhibition area. The shape of space classifies types of section which cause space's characteristics.

• Korean Institute of Interior Design Journal
• /
• no.36
• /
• pp.93-101
• /
• 2003

The first object of this study is to clarify the newly demanded service to the visiter in the museum. And the second is to consider the spatial configuration on the layout of exhibition and the shape of exhibition room from the view points of behavior of appreciation and other methodology. The results of this study are as follows : The exhibition content and structure of Seoul Museum of History formed by a story-line according to the theme of an each zone fixed sequence in an each exhibition that we are achieved. But the layout of exhibition and the shape of exhibition consist on the other hand of the freedom selection. So the problem appeared In the difference of the exhibition content and the layout of exhibition to the behavior of appreciation. It can be said that the concept of exhibition space should be taken into account and the spatial configuration by the completed floor plan in order to satisfy the planning concepts.

• 한국신재생에너지학회:학술대회논문집
• /
• 2010.11a
• /
• pp.40.2-40.2
• /
• 2010

The Solar Daylighting Technology is considered with the plan that will be able to embody the energy technology which is possible to continue. Daylighting has an considerable advantage of the high effectiveness and the various use because daylighting can use the infrared ray, the visible ray and the ultraviolet rays without energy transformation. In this study, the experiment is tried of making the shape and an arrangement of the reflector different After establishing the reflector in the height(10m) which is fixed. It's also researched on the shape of the efficient reflector using the program(Trace Pro) at the time of the autumnal equinox and the winter solstice at fixed hours.

• Journal of the Korean Institute of Rural Architecture
• /
• v.21 no.4
• /
• pp.53-60
• /
• 2019

The purpose of this study is to investigate the change of Hidden gates form with the times. Fortresses position is constructed on the Korea mountain ranges. Hidden gate, one of facilities to construct fortress among various factors, represents as route of supplies way, ask for rescue, or counterattack plan to come in. The shape of hidden gate changes depend on land form, function, and time period. Previous research partially based on archeology or history. This research analyze Namhan mountain Namhansansung, one of the highest hidden gates count in Korea, distributive by main fortress, Bong-am fortress, Hanbong fortress. Nahhan Mountain fortress repeatedly affected by King Injo in Joseon Dynasty. As a result, Nahhan Mountain fortress consist of hidden gates alternation depend on the time of establishment or extension which makes different shape or size.

• Journal of the Korean Society of Industry Convergence
• /
• v.21 no.1
• /
• pp.1-8
• /
• 2018

The purpose of this study is to develop a high-strength, high-toughness, thin-walled aluminum shock absorber housing product by applying a high vacuum die casting method to improve internal gas defect and formability. The analysis program dedicated for the casting was used because it was too costly and time-consuming to adopt the gating system design. The final casting plan was designed based on the flow pattern of the material filled into the mold and the result of air pressure and air pocket after the material was completely filled in the mold. Gaty shape was designed as a split type. The runner was designed to have the same shape as the initial inlet curve of the cavity, and the flow of the molten metal was prevented from turbulent flow. The most favorable results were obtained when the injection speed was $V_2=4.0m/s$. Defects on pores were reduced by applying high vacuum level inside the mold.

• Journal of the Korean Solar Energy Society
• /
• v.26 no.3
• /
• pp.127-133
• /
• 2006

Recently, various building types such as Center-Core shape and Y-shape were studied as the demand for hight-rise residental complex increased. However, Center-Core type can make many Problems because the house unit can face to the north or west. Therefore, this study evaluated daylight conditions for four plan types in high-rise residental complex.

• Transactions of Materials Processing
• /
• v.8 no.6
• /
• pp.591-603
• /
• 1999

A computer-aided process planning system for rotationally symmetric deep drawing products has been developed. The application for non-axisymmetric components, however, has been reported yet. Therefore, this study investigates process sequence design in deep drawing process and constructs a computer-aided process planning system for non-axisymmetric motor frame products with elliptical shape. The system developed consists of three modules. The first one os a 3-dimensional modeling module to calculate surface area for non-axisymmetric products. The second one is a blank design module that creates an oval-shaped blank with the identical surface area. The third one is a process planning module based on production rules that play the best important roles in an expert system for manufacturing. The production rules are generated and upgraded by interviewing with field engineers. Especially, drawing coefficient, punch and die radii are considered as main design parameters. The constructed system for elliptical deep drawing products would be very useful to reduce lead time and improve accuracy for production.

• The KSFM Journal of Fluid Machinery
• /
• v.15 no.5
• /
• pp.42-47
• /
• 2012

Newly updated wing shape to apply small vertical wind turbine is tested with digital wind tunnel in this study. Digital wind tunnel is designed to reduce length of wind tunnel and also to maximize its area of test section. Same DC fans of ninety six are installed in the end side of its rectangular duct and air can be blown out to the other side to have uniform flow with same electricity power. New wing is concluded using experimental plan and analysis with 4-parameters and 3-levels, and tested with digital wind tunnel. It shows better performance in lift to drag ratio, and can applied to the wind turbine for the higher torque and lower thrust.

• Proceedings of the Korea Concrete Institute Conference
• /
• 1998.10b
• /
• pp.809-814
• /
• 1998

Recently many cases that using strengthening method with a steel plate or carbon-fiber sheet in a construction field are increasing. In this reason, it is demanded that developing a plan of preventing delamination of strengthening material. So in this research, for the case of strengthening method of steel plate, it is made use of notch and anchor bolt and for the case of carbon fiber sheet, it is made use of notch, anchor bolt, line anchor and shear strengthening. After all the cases were applied, we made 15 specimen beams. The beams was measured and analyzed about the behavior property of strengthened beams, the ability strengthening method, the relation between load and the shape of failure, the crack load, the yield load, the shape of crack pattern, the increasing rate from yield load and maximum load and the strain of rebar. All the strengthening methods results in almost same value until the yield load, and it wasn't quite different from the theoretical value. But for the case of increasing rate from the yield load and maximum load, comparing with the existing method, the new strengthening methods are proved to be profitable about the safety.

• The Journal of Korea Robotics Society
• /
• v.17 no.4
• /
• pp.493-499
• /
• 2022

This paper presents the design for the kinematic structure of a system for an automatically moored 6000 ton autonomous ship in a port, and the process and results of optimal design for the link cross-sectional shape. We propose an automatic mooring system with a PPP type serial manipulator structure capable of linear motion in the XYZ axis. The mooring force applied by the mooring system was derived with dynamics simulation tool "ADAMS". The design goal is the minimization of the cross-sectional area of the link. Constrains include compressive stress and shear stress. The optimization problems were solved by using the sequential quadratic programing method implemented in the fmincon package. The shape of the cross section was assumed to be rectangle. Through future research, we plan to manufacture automatic mooring system for 6000ton class autonomous ship.