• 제목/요약/키워드: Plain tube

검색결과 118건 처리시간 0.027초

구강악안면부위에서 발견된 이물질 (FOREIGN BODIES IN MAXILLOFACIAL REGION)

  • 김일규;신주호;오성섭;최진호;오남식;임영일;김왕식
    • Journal of the Korean Association of Oral and Maxillofacial Surgeons
    • /
    • 제27권3호
    • /
    • pp.266-270
    • /
    • 2001
  • 구강악안면 영역에 발생한 foreign body impaction은 흔하지 않지만, 일단 발생하면 즉시 제거되어야 하며 술후 후유증을 충분히 방지하기위해 주의깊은 병력청취, 임상 검사, 방사선 사진을 이용한 localization이 꼭 필요하다. 그리고 수술시에는 조심스럽게 조직을 박리하고 전체 손상부위를 철저히 탐진해서 foreign body를 제거해야 한다. 저자등은 침구용 바늘, nasolacrimal ductoplasty용 silicone tube, 산탄 총알등 다양한 구강 악안면영역에서 발견된 이물질을 제거한 경험후 문헌고찰과 함께 보고하는 바이다.

  • PDF

설비공학 분야의 최근 연구 동향 : 2013년 학회지 논문에 대한 종합적 고찰 (Recent Progress in Air-Conditioning and Refrigeration Research : A Review of Papers Published in the Korean Journal of Air-Conditioning and Refrigeration Engineering in 2013)

  • 이대영;김사량;김현정;김동선;박준석;임병찬
    • 설비공학논문집
    • /
    • 제26권12호
    • /
    • pp.605-619
    • /
    • 2014
  • This article reviews the papers published in the Korean Journal of Air-Conditioning and Refrigeration Engineering during 2013. It is intended to understand the status of current research in the areas of heating, cooling, ventilation, sanitation, and indoor environments of buildings and plant facilities. Conclusions are as follows. (1) The research works on the thermal and fluid engineering have been reviewed as groups of fluid machinery, pipes and relative parts including orifices, dampers and ducts, fuel cells and power plants, cooling and air-conditioning, heat and mass transfer, two phase flow, and the flow around buildings and structures. Research issues dealing with home appliances, flows around buildings, nuclear power plant, and manufacturing processes are newly added in thermal and fluid engineering research area. (2) Research works on heat transfer area have been reviewed in the categories of heat transfer characteristics, pool boiling and condensing heat transfer and industrial heat exchangers. Researches on heat transfer characteristics included the results for general analytical model for desiccant wheels, the effects of water absorption on the thermal conductivity of insulation materials, thermal properties of Octadecane/xGnP shape-stabilized phase change materials and $CO_2$ and $CO_2$-Hydrate mixture, effect of ground source heat pump system, the heat flux meter location for the performance test of a refrigerator vacuum insulation panel, a parallel flow evaporator for a heat pump dryer, the condensation risk assessment of vacuum multi-layer glass and triple glass, optimization of a forced convection type PCM refrigeration module, surface temperature sensor using fluorescent nanoporous thin film. In the area of pool boiling and condensing heat transfer, researches on ammonia inside horizontal smooth small tube, R1234yf on various enhanced surfaces, HFC32/HFC152a on a plain surface, spray cooling up to critical heat flux on a low-fin enhanced surface were actively carried out. In the area of industrial heat exchangers, researches on a fin tube type adsorber, the mass-transfer kinetics of a fin-tube-type adsorption bed, fin-and-tube heat exchangers having sine wave fins and oval tubes, louvered fin heat exchanger were performed. (3) In the field of refrigeration, studies are categorized into three groups namely refrigeration cycle, refrigerant and modeling and control. In the category of refrigeration cycle, studies were focused on the enhancement or optimization of experimental or commercial systems including a R410a VRF(Various Refrigerant Flow) heat pump, a R134a 2-stage screw heat pump and a R134a double-heat source automotive air-conditioner system. In the category of refrigerant, studies were carried out for the application of alternative refrigerants or refrigeration technologies including $CO_2$ water heaters, a R1234yf automotive air-conditioner, a R436b water cooler and a thermoelectric refrigerator. In the category of modeling and control, theoretical and experimental studies were carried out to predict the performance of various thermal and control systems including the long-term energy analysis of a geo-thermal heat pump system coupled to cast-in-place energy piles, the dynamic simulation of a water heater-coupled hybrid heat pump and the numerical simulation of an integral optimum regulating controller for a system heat pump. (4) In building mechanical system research fields, twenty one studies were conducted to achieve effective design of the mechanical systems, and also to maximize the energy efficiency of buildings. The topics of the studies included heating and cooling, HVAC system, ventilation, and renewable energies in the buildings. Proposed designs, performance tests using numerical methods and experiments provide useful information and key data which can improve the energy efficiency of the buildings. (5) The field of architectural environment is mostly focused on indoor environment and building energy. The main researches of indoor environment are related to infiltration, ventilation, leak flow and airtightness performance in residential building. The subjects of building energy are worked on energy saving, operation method and optimum operation of building energy systems. The remained studies are related to the special facility such as cleanroom, internet data center and biosafety laboratory. water supply and drain system, defining standard input variables of BIM (Building Information Modeling) for facility management system, estimating capability and providing operation guidelines of subway station as shelter for refuge and evaluation of pollutant emissions from furniture-like products.

Multiloop edgewise arch wire의 부위별 하중변형률 (Regional load deflection rate of multiloop edgewise archwire)

  • 김병호;양원식
    • 대한치과교정학회지
    • /
    • 제29권6호
    • /
    • pp.673-688
    • /
    • 1999
  • 본 연구는 multiloop edgewise arch wire(MEAW)의 기계적 특성을 분석하기 위해, 1) 개별 브라켓간 부위에서의 MEAW의 하중변형률을 수종의 재질로 된 동일 규격의 교정용 호선과 비교하고, 2)개별 브라켓간 부위와 multi-L-loop 부위(측절치 브라켓의 원심연과 제2대구치 튜브의 근심연간의 거리)에서의 wire stiffness를 비교하며, 3)단일 L-loop와 multi-L-loop의 하중변형률에 대한 공학적 이론식을 유도하여 MEAW의 하중변형특성을 규명하고자 시행하였다. 5가지의 서로 다른 수평길이를 지닌 L-loop와 5개의 L-loop로 구성된 상하악의 multi-L-loop를 .$016\times.022$ inch의 stainless steel 강선으로 제작하였고, .$016\times.022$ inch의 Plain stainless steel, TML NiTi를 준비하였다. Instron model 4466 만능시험기에 50N 용량의 load cell을 부착하여 crosshead의 속도 1.0min/분, 브라켓간 부위의 시험시에는 최대변위량 1.0mm로 각 브라켓간격에서 측정하였고, multi-L-loop부위의 경우는 최대변위량 10mm, 42mm의 거리에서 측정하였다. 반복된 실험에 의해 발생할 수 있는 응력에 따른 물리적 성질 변화의 가능성을 배제하기 위해 각 조건마다 동일한 5개의 시편을 사용하였다. 측정된 하중변형률과 각 실험의 브라켓간격을 이용하여 각 브라켓부위에서의 L-loop의 wire stiffness number를 계산하였고 이를 multi-L-loop의 그것과 비교하였다. 5개의 loop로 구성된 multi-L-loop를 35개의 직선구간으로 나누어 각 구간의 에너지를 계산, 총합을 낸 후 가해진 외력으로 미분하여 하중변형률의 이론식을 유도하였으며, 이를 wire stiffness로 환산하여 단일 L-loop의 wire stiffness와 비교하였다. 그 결과는 다음과 같았다. 1) 각 브라켓 간격에서의 L-loop의 하중변형률은 평균적으로 stainless steel wire의 1/5.16, NiTi의 1/l.53, TMA의 1/2.47이었다. 2) multi-L-loop부위 에서의 MEAW의 wire stiffness는 개개 브라켓간 간격에서보다 평균 1.53배 더 높았고, 같은 부위에서의 NiTi보다 1.9배 더 높았다. 3) 유도된 하중변형률의 이론식에 따르면, 부위에 따라서 wire stiffness의 차이를 보이지 않는 직선 강선과는 달리, L-loop가 부여된 경우, 개별 L-loop의 ire stiffness는 전체 multi-L-loop의 wire stiffness보다 낮은 것으로 나타났다. 이상의 연구결과로 미루어 볼 때, MEAW는 개별적인 치아이동을 허용하면서, 가해진 교정력을 효과적으로 전체 치열로 전달할 수 있는 독특한 기계적 특성을 지니고 있는 것으로 생각된다.

  • PDF

흉부촬영(胸部撮影)에서 증감지(增感紙)-필름계의 선질변화(線質變化)에 따른 감도(感度)와 화질에 관(關)한 연구(硏究) (Image and Exposure Dose in Accordance with Radiation Quality on Plain Chest Radiography)

  • 김정민;김동현;임태랑;석전유치;전전미향;앵정달야
    • 대한방사선기술학회지:방사선기술과학
    • /
    • 제15권1호
    • /
    • pp.65-78
    • /
    • 1992
  • Routine chest radiography is generally imaged by high voltage technique but some radiological technologists use low voltage for imaging. High voltage is usually said between $120\;kV{\sim}140\;kV$. Some RTs like using heavy filtration but others seldom like using it. However which is better for use calcium tungustate film screen system or ortho system and high contrast film or wide latitude c-type film for the exculusive use of chest radiography. We could not make a decision which is ideal method for use. In my opinion any method is not always exellent for chest radiography. In my experiments that I had at Kaken hospital in Japan last year I expect to keep the balance between image quality and diagnostic range and to reduce radiation dose for patients. My experiments are as follows. 1. We have looked into system characteristics(speed and contrast) in accordance with kVp($80{\sim}140$) and added filter($no{\sim}1/16\;VL$) in three screen film systems(BX3+CRONEX4, SRO750+MGH, SRO750+MGL). 2. We have looked into skin dose and film dose with same D=1.8 lung field density in accordance with kVp($80{\sim}140$) and added filter($no{\sim}1/16\;VL$) in three screen film systems. 3. We have compared with the evaluation between correlation of physical image quality(MTF) and optical diagnostic capability. Result are follows. 1. Speed of BX3+CRONEX4 became higher in accodance with kVp and thickness of filter but speed of ortho system was not as like regular system. Thicker filter diminished the speed over 100 kV range in SRO750+MGL. In case of SRO750+MGH speed of 1/16VL filter was looked into lower than speed of 1/4VL filter. Sensitivity of ortho system depends on tube voltage and added filter. 2. Skin dose has been detected $225\;{\mu}Gy{\sim}66\;{\mu}Gy$ in BX3+CRONEX4 from 80 kV, no filter to 140 kV, 1/16VL filter. SRO750+MGH could reduce the patient dose $1/2{\sim}1/3$ level in comparison to that of BX3+CRONEX4. 3. The higher kV was the worse MTF became the thicker filter was the worse MTF became too. MTF of BX3+CRONEX4 was detected better than MTF of SRO750+MGH but SRO750+MGH's optical detectability of small lesion in lung field came out better than that of BX3+CRONEX4. Conclusion Recently routine chest radiography is generally imaged by high voltage but it seems to be there are some questions in using of film screen combination. In high voltage chest radiography the subject contrast will come down that means latitude become wider. In this case if we select the low contrast film screen system(C or L type) the film contrast will fall down extremly and detectability of small lesion will be deteriorated. Wide latitude C, L type film has a merit of high detectability on mediastinum. Furthermore high contrast film screen system has the advantage to keep the high contrast in low density region as like mediastinum and heart shadow. Therefore in low subject contrast high voltage chest radiography we would rather choose the high contrast film screen system(H type) I think. From a view point of patient dose detectability of mediastinum and lung field. The optimum technical facter was found out 120 kV, 1/16VL filter : BX3+CRONEX4, 140 kV, 1/4VL filter : SRO750+MGH, 100 kV, 1/4VL filter : SRO750+MGL.

  • PDF

Imipramine이 배뇨근 세포의 수축성에 미치는 직접작용 (Effect of Imipramine on the Contractility of Single Cells Isolated from Canine Detrusor)

  • 허찬욱;이광윤;김원준
    • Journal of Yeungnam Medical Science
    • /
    • 제11권2호
    • /
    • pp.293-302
    • /
    • 1994
  • 유뇨증의 치료제로서 널리 사용되고 있는 imipramine의 작용기전에 관한 학설이 여러가지가 있으나 그 중 콜린성수용체 봉쇄작용을 관찰하기 위한 방법으로 평활근 세포를 분리배양하여 단일세포에 대한 acetylcholine의 수축작용과 이에 대한 imipramine의 길항작용을 atropine의 그것과 비교해 보기로 하였다. 개의 방광을 적출하여 $0{\sim}4^{\circ}C$의 K-H 용액내에서 $2{\times}2mm$크기의 평활근 절편을 얻어 $36^{\circ}C$의 collagenase 용액에 넣고 95%/5% $O_2/CO_2$, 혼합산소 공급하에서 17~20분동안 배양하여 분리된 부유세포군을 5 ml test tubes에 나누어 담고 acetylcholine을 $10^{-14}M{\sim}10^{-9}M$의 농도로 첨가하였다. Acrolein 1%를 가하여 수축한 세포를 고정시킨 후, 위상차 현미경에 장착한 CCTV camera로 채취한 영상을 microscaler로 전송하고 monitor상에서 세포의 길이를 측정하였다. 분리된 세포들은 acetylcholine에 의해 5초 이내에 최대 수축을 보였으며 이후 120초까지 수축상태를 지속하였다. Atropine은 acetylcholine 유발 수축을 atropine $10^{-7}M$ 에서부터 농도의존적으로 억제하였으며, imipramine도 acetylcholine 유발수축을 atropine과 같은 경향으로 농도의존적으로 억제하였는데, imipramine $10^{-9}M$의 저농도에서도 유의한 억제를 보였다. 이상의 결과를 종합하면 본 실험에 사용된 조건하에서의 collagense를 이용한 세포 분리법은 단일세포를 대상으로 하는 실험을 위하여 가용한 방법이며, imipramine은 개의 방광평활근 단일세포에서 atropine보다 더 강력한 콜린성 수용체 봉쇄작용을 나타낸다고 생각되었다.

  • PDF

공기조화, 냉동 분야의 최근 연구 동향 - 1998년 1999년 학회지 논문에 대한 종합적 고찰 - (Recent Progress in Air Conditioning and Refrigeration Research - A Review of papers Published in the Korean Journal of Air-Conditioning and Refrigeration Engineering in 1998 and 1999 -)

  • 이재헌;김광우;김병주;이재효;김우승;조형희;김민수
    • 설비공학논문집
    • /
    • 제12권12호
    • /
    • pp.1098-1125
    • /
    • 2000
  • A review on the papers published in the Korean Journal of Air-Conditioning and Refrigerating Engineering in 1998 and 1999 has been done. Focus has been put on current status of research in the aspect of heating, cooling, ventilation, sanitation and building environment. The conclusions are as follows. 1) A review of the recent studies on fluid flow, turbomachinery and pipe-network shows that many experimental investigations are conducted in applications of impingement jets. Researches on turbulent flows, pipe flows, pipe-networks are focused on analyses of practical systems and prediction of system performance. The results of noise reduction in the turbomachinery are also reported. 2) A review of the recent studies on heat transfer analysis and heat exchanger shows that there were many papers on the channel flow with the application to the design of heat exchanger in the heat transfer analysis. Various experimental and numerical papers on heat exchanger were also published, however, there were few papers available for the analysis of whole system including heat exchanger. 3) A review of the recent studies on heat pump system have focused on the multi-type system and the heat pump cycle to utilize treated sewage as the heat source. The defrosting and the frosting behaviors in the fin-tube heat exchanger is experimentally examined by several authors. Several papers on the ice storage cooling system are presented to show the dynamic simulation program and optimal operation conditions. The study on the micro heat pipes for the cooling of high power electronic components is carried out to examine the characteristics of heat and mass transfer processed. In addition to these, new type of separate thermosyphon is studied experimentally. 4) The recent studies on refrigeration/air conditioning system have focused on the system performance and efficiency for new alternative refrigerants. New systems operating with natural refrigerants are drawing lots of attention. In addition to these, evaporation and condensation heat transfer characteristics of traditional and new refrigerants are investigated for plain tubes and also for microfin tubes. Capillary tubes and orifice are main topics of research as expansion devices and studies on thermophysical properties of new refrigerants and refrigerant/oil mixtures are widely carried out. 5) A review of the recent studies on absorption cooling system shows that numerous experimental and analytical studies on the improvement of absorber performance have been presented. Dynamic analysis of compressor have been performed to understand its vibration characteristics. However research works on tow-phase flow and heat transfer, which could be encountered in the refrigeration system and various phase-change heat exchanger, were seemed to be insufficient. 6) A review of recent studies on duct system shows that the methods for circuit analysis, and flow balancing have been presented. Researches on ventilation are focused on the measurement of ventilation efficiency, and variation of ventilation efficiency with ventilation methods by numerous experimental and numerical studies. Furthermore, many studies have been conducted in real building in order to estimate indoor thermal environments. Many research works to get some information for cooling tower design have been performed but are insufficient. 7) A review on the recent studies on architectural thermal environment and building mechanical systems design shows that thermal comfort analysis is sitting environment, thermal performance analysis of Korean traditional building structures., and evaluation of building environmental load have been performed. However research works to improve the performance of mechanical system design and construction technology were seemed to be insufficient.

  • PDF

메밀의 이형예현상과 수정력 발생학적 특징에 관한 연구 (Studies on Heterostylism, Fertility, and Embryological Characteristics in Buckwheat. Fagopyrum esculentum)

  • 이만상
    • 한국작물학회지
    • /
    • 제31권2호
    • /
    • pp.129-142
    • /
    • 1986
  • 메밀의 지방재래종 55계통을 수집하여 춘파 및 하파재배후 개화한 다음 장ㆍ단주화의 분리비 또는 수정력, 대소포자모세포감수분열, 자웅배우체영성과정, 난장치 등을 조사하고 또한 상호인공교배하여 수정력, 수정현상, 원배형성 등을 비교, 조사하였던바 그 결과를 요약하면 다음과 같다. 1. 해안지, 산간지, 평야지의 지역별 장ㆍ단주화 분리비는 큰 차는 없었으나, 평야지가 해안지나 산간지보다 불규칙하였다. 2. 계절별 장ㆍ단주화 분리비는 춘파재배는 불규칙하였으나 하파재배는 1:1로 분리하였다. 3. 양친의 화형에 따른 장ㆍ단주화 분리비는 양친화형에 관계없이 춘파재배는 단주화비율이 현저히 높았으나 하파재배는 1:1로 분리를 하였다. 4. 인공적법수분에 의한 결실율은 춘파재배 (약30%) 보다 하파재배(59∼61% ) 가 현저히 높았고, 부적법수분에서는 춘파재배에서만 0.8∼1.8 % 결실되었다. 5. 하파재배에서 개화시기별 인공적법수분에서 결실율은 초기>중기>말기순으로 높았다. 6. 장ㆍ단기별 주당입수와 입중은 입의 크기에 관계없이 장주화<단주화였고, 1,000입중은 대입종이 장주화>단주화, 중소입종은 장주화>단주화이였다. 7. 정상대소포자형성율은 춘파재배보다 하파재배가 현저히 높았다. 8. 배주는 직생배주이며 2개의 극핵은 개화전에 융합핵으로 되 었다. 9. 화분은 수분후 30분이면 주두에서 발아, 신장하고, 1.5∼2시간이면 주공내에 진입하며, 2∼3시간이면 극핵과 정핵이, 3∼5시간이면 알세포와 정핵이 수정이 되는데 가을보다 여름이 빠르다. 10. 수정란은 합점측의 상단세포와 주공측의 하단세포로 분열되는데 수분후 15∼24시간이 소요되며, 여름이 가을보다 빠르다. 11. 수분후 7-8일 이면 원배는 배로 형성되기 시작하여 15일 이면 완전한 배를 형성한다.

  • PDF