• 콘크리트학회논문집
• /
• 제24권4호
• /
• pp.361-368
• /
• 2012

보수 보강재는 강도, 안정성, 내구성, 모재와의 부착력 등 많은 특성이 필요하며, 최근 변형경화형 시멘트 복합체(strain-hardening cement-based composite, SHCC)가 기존의 재료를 대체할 수 있는 성능으로 많은 연구가 이루어지고 있다. 팽창형 SHCC는 팽창재를 이용하여 수축이 발생하는 SHCC의 단점을 보완하여 성능을 개선시킨 복합체로 이를 이용해 보강재의 성능을 만족시키면서 동시에 강도 증진 효과를 가져올 수 있을 것으로 예상된다. 따라서 이 연구에서는 SHCC 보강재의 강도, 팽창재 대체 여부 및 보강 두께를 변수로 하여 휨 성능을 평가하였으며, 실제 보강에 적용 시 기초 자료로 활용하고자 한다.

• Advanced Composite Materials
• /
• 제17권1호
• /
• pp.57-73
• /
• 2008

The present paper focuses on experimental verification of the ply-by-ply basis inelastic analysis of multidirectional laminates. First of all, rate dependence of the tensile behavior of balanced symmetric cross-ply T800H/epoxy laminates with a $[0/90]_{3S}$ lay-up under off-axis loading conditions at $100^{\circ}C$ is examined. Uniaxial tension tests are performed on plain coupon specimens with various fiber orientations $[{\theta}/(90-{\theta})]_{3S}$ ($\theta$ = 0, 5, 15, 45 and $90^{\circ}C$) at two different strain rates (1.0 and 0.01%/min). The off-axis stress.strain curves exhibit marked nonlinearity for all the off-axis fiber orientations except for the on-axis fiber orientations $\theta$ = 0 and $90^{\circ}$, regardless of the strain rates. Strain rate has significant influences not only on the off-axis flow stress in the regime of nonlinear response but also on the apparent off-axis elastic modulus in the regime of initial linear response. A macromechanical constitutive model based on a ply viscoplasticity model and the classical laminated plate theory is applied to predictions of the rate-dependent off-axis nonlinear behavior of the cross-ply CFRP laminate. The material constants involved by the ply viscoplasticity model are identified on the basis of the experimental results on the unidirectional laminate of the same carbon/epoxy system. It is demonstrated that good agreements between the predicted and observed results are obtained by taking account of the fiber rotation induced by deformation as well as the rate dependence of the initial Young's moduli.

• Advances in aircraft and spacecraft science
• /
• 제3권1호
• /
• pp.61-75
• /
• 2016

Climate changes brought on by human interventions have proved to be more devastating than predicted during the recent decades. Recognition of seriousness of the situation has led regulatory organisations to impose strict targets on allowable carbon dioxide emissions from automotive vehicles. As a possible solution, it has been proposed that Fibre Metal Laminate (FML) system is used to reduce the weight of future vehicles. To facilitate this investigation, FML based on steel and self-reinforced polypropylene was stamp formed into dome shapes under different blank holder forces (BHFs) at room temperature and its forming behaviour analysed. An open-die configuration was used in a hydraulic press so that a 3D photogrammetric measurement system (ARAMIS) could capture real-time surface strains. This paper presents findings on strain evolutions at different points along and at $45^{\circ}$ to fibre directions of circular FML blank, through various stages of forming. It was found initiation and rate of deformation varied with distance from the pole, that the mode of deformations range from biaxial stretching at the pole to drawing towards flange region, at decreasing magnitudes away from the pole in general. More uniform strain distribution was observed for the FML compared to that of plain steel and the most significant effects of BHF were its influence on forming depth and level of strain reached before failure.

• 패션비즈니스
• /
• 제23권2호
• /
• pp.1-17
• /
• 2019

The objective of this study was to investigate electrical conductivity of fabrics from polyester (PET) and Nylon (N) containing polyurethane (PU), with silver paste patterns screen-stenciled in three directions. The PET/PU and N/PU fabrics knitted or woven were uniaxially strain-recovered up to 22.5% in three times when each change in electrical resistance was simultaneously measured. This study established four variables that complexly affected electrical conductivity of these specimens; fabric structures, components, cover factors, and the percolation of silver particles. The woven or knitted fabric structures did not distinctively cause the changes in electrical resistance, however, the woven fabrics with the diagonal patterns showed their relatively high electrical resistance. The PET/PU fabrics with increasing the PET proportion generally presented the opposite propensity to its electrical conductivity. The changes in electric resistance of the PET/PU 85/15 2/1 twill and double plain fabrics instantaneously responded to the rate of elongation. The PET/PU group exhibited a reverse correlation between its cover factor and electrical resistivity. The highest electrical conductivity of the PET/PU 95/5 interlock fabric, with very few fluctuations, was attributed to the deep percolation of the silver particles that bridged the gaps between one loop and another. On the other hand, the occurrence of the silver cracks along with the elongated direction led to the immeasurably high change in electrical resistance as the strain increased.

• Geomechanics and Engineering
• /
• 제8권1호
• /
• pp.81-95
• /
• 2015

The permeability behavior of Ariake clays has been investigated by constant rate of strain (CRS) consolidation tests with vertical or radial drainage. Three types of Ariake clays, namely undisturbed Ariake clay samples from the Saga plain, Japan (aged Ariake clay), clay deposit in shallow seabed of the Ariake Sea (young Ariake clay) and reconstituted Ariake clay samples using the soil sampled from the Saga plain, were tested. The test results indicate that the deduced permeability in the horizontal direction ($k_h$) is generally larger than that in the vertical direction ($k_v$). Under odometer condition, the permeability ratio ($k_h/k_v$) increases with the vertical strain. It is also found that the development of the permeability anisotropy is influenced by the inter-particle bonds and clay content of the sample. The aged Ariake clay has stronger initial inter-particle bonds than the young and reconstituted Ariake clays, resulting in slower increase of $k_h/k_v$ with the vertical strain. The young Ariake clay has higher clay content than the reconstituted Ariake clay, resulting in higher values of $k_h/k_v$. The microstructure of the samples before and after the consolidation test has been examined qualitatively by scanning electron microscopy (SEM) image and semi-quantitatively by mercury intrusion porosimetry (MIP) tests. The SEM images indicate that there are more cut edges of platy clay particles on a vertical plane (with respect to the deposition direction) and there are more faces of platy clay particles on a horizontal plane. This tendency increases with the increase of one-dimensional (1D) deformation. MIP test results show that using a sample with a larger vertical surface area has a larger cumulative intruded pore volume, i.e., mercury can be intruded into the sample more easily from the horizontal direction (vertical plane) under the same pressure. Therefore, the permeability anisotropy of Ariake clays is the result of the anisotropic microstructure of the clay samples.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 1991년도 추계학술발표회 논문집 지반공학에서의 컴퓨터 활용 COMPUTER UTILIZATION IN GEOTECHNICAL ENGINEERING
• /
• pp.123-132
• /
• 1991

The GEOKST program was used to solve the tunnel example problem. The package can solve such geotechnical problem as excavation, embankment, foundations, etc., in which the soil can be modeled by various elastoplastic geomaterial models. The main objective was to consider the effects of excavation depth to the face of the tunnel on the stability of the ground and support system. Depended on the strength of the ground materials, the limit excavation depth without any support system could be established by analyzing three-dimensional excavation problem. In this given example problem, the strengths of the ground materials were enough for the stability of the tunnel without any support system up to fairly deep excavation and the maximum tunnel section displacement was stabilized as the excavation proceed. The asymptotic value was approximately the same as that of the plane strain analysis. Thus, assuming the plain strain condition and simulation the actual excavation procedure, the maximum tunnel section displacement was caculated after final step. The maximum calculated displacement occured at the top section of the tunnel geometry and was about 8mm.

• Composites Research
• /
• 제18권2호
• /
• pp.30-37
• /
• 2005

본 논문에서는 평직구조를 갖는 성층권 비행선 기낭의 하중막재에 대한 비선형 유한요소 해석 결과를 기술하였다. 평직구조를 갖는 하중막재의 미세구조를 3차원적으로 구현하였고, Updated Lagrangian 방법을 사용하여 기하학적 비선형성을 고려하였다 계산결과, 큰 변형률에서 비선형해석으로부터 얻은 응력-변형률 곡선은 선형해석의 결과와 큰 차이를 보였다. 또한 응력-변형률 곡선으로부터 얻은 비선형 탄성계수 값은 선형 탄성계수보다 큰 값을 보였는데 그 차이는 섬유의 굴곡도가 작은 경우 더욱 두드러지게 나타났다

• 한국잠사곤충학회지
• /
• 제42권1호
• /
• pp.10-13
• /
• 2000

The objective of this research was to characterize of the silkworm that might be recognized to the Korean native strains. The eleven strains of Korean race used in this study, which is cultured in Korea and Japan seri-cultural research organs. Most of Korean varieties were three molting and univoltine, comparatively longer larval duration than the trimolter general. The egg characters of varieties showed short-eliptic shape and dark brown egg color except for a few varieties which shows greenish dark brown. Also, most of varieties were showed the plain(p) and moricaud( $p_{M}$) in larval markings. Moric marking of the varieties also consist of innumerable dark grayish brown lines and dots, though somewhat darker and lighter than that of the wild silkworm, Bombyx mandarina. Cocoon characters variations of varieties were seen in the size, color and shape. 8 varieties were colored cocoon, i.e., yellow, greenish yellow and light green etc., the others were white cocon. The shape of cocons were consisted of constricted shallowly in the middle and attenuated at one or both ends of cocoon, i.e., spindle. The results of this study is sufficient evidence that Korean strains were shown as the one of regional origin strain of domesticated silkworm such as the Chinese and Japanese etc.c.

• 콘크리트학회논문집
• /
• 제12권1호
• /
• pp.3-12
• /
• 2000

A fracture energy concept proposed by Ouyang and Shah's fracture mechanics approach was used to predict cracking of reinforced concrete members subjected to tension. In this approach, fracture properties in plain concrete which incorporate the presence of the fracture process zone are first determined from the generalized size effect method, then fracture energy required for crack propagation with the same dimension and material properties are evaluated using an R-curve. Subsequently taking into account the material properties in Ouyang and Shah's approach, a theoretical analysis to predict the mechanical behavior of reinforced concrete members subjected to tension was performed and compared to observed experimental results. It is seen that the predicted average crack spacing curves agree well with the experimental results, whereas the analytical method seems to predict lower values for this study. The analytical approach predicts well responses of stress-strain curves before and after the first crack is formed. It is concluded from this study that a fracture energy concept based on the R-curve and the generalized size effect method is a rational approach to predict cracking of reinforced concrete members subjected to tension.

• 콘크리트학회지
• /
• 제2권3호
• /
• pp.55-64
• /
• 1990

구조재료로서 섬유보강콘크리트의 사용이 증가와 더불어 그 자체의 역학적 특성에 대한 더많은 지식이 필요해지고 있다. 본 논문은 단조하중과 반복압축하중을 받을 때 탄소섬유보강콘크리트의 거동에 대한 실험 결과를 나타낸다. 그 결과등은 (1)CFRC는 콘크리트 매트릭스에 섬유를 증가시킴으로써 큰크리트 매트릭스이 강도를 개선시키고 있다. (2) 콘크리트 매트릭스에 섬유를 증가시키는 것은 그 자체의 응력도-변형도 응답에 대해서 실질적인 변화를 가져왔었다. 이 변화는 응력도-변형에도 주목할 정도로 연성이 증가되는 특성이 나타나고 있다. (3) CFRC의 반복하중하에서의 거동은 보통콘크리트에 비해서 더욱 많은 안정성을 가지고 있다. 높은 섬유혼입은 응력도-변형도 곡선에서 곳선하강곡선이 보다 완만하게 나타나고 있다. 이것은 재료의 더 높은 연성의 결과이다.