• Communications for Statistical Applications and Methods
• /
• v.14 no.3
• /
• pp.551-560
• /
• 2007

Kruskal and Wallis (1952) proposed typical nonparametric method in one-way layout problem. A special feature of this procedure is use of rank in mixed samples. In this paper, the new procedure based on placement as extension of the two sample placement tests described in Orban and Wolfe (1982) was proposed. Some critical values in small sample cases and comparative results of a Monte Carlo power study are presented.

• Interaction and multiscale mechanics
• /
• v.1 no.3
• /
• pp.357-368
• /
• 2008

The result of damage detection from on-site measurements is commonly polluted by unavoidable measurement noises. It is widely recognized that this side influence could be reduced to some extent if the sensor placement was properly designed. Although many methods have been proposed to find the optimal number and location of mono-type sensors, the optimal layout of multi-type sensors need further investigation, because a network of heterogeneous sensors is commonly used in engineering. In this paper, a new criterion of the optimal placement for different types of sensors is proposed. A corresponding heuristic is developed to search for good results. In addition, Monte Carlo simulation is suggested to design a robust damage detection system which contains certain redundancies. The validity of these methods is illustrated by two bridge examples.

• Communications for Statistical Applications and Methods
• /
• v.19 no.5
• /
• pp.721-729
• /
• 2012

Various methods control the influence of a covariate on a response variable. These methods are analysis of covariance(ANCOVA), RANK ANCOVA, ANOVA of (covariate-adjusted) residuals, and Kruskal-Wallis tests on residuals. Covariate-adjusted residuals are obtained from the overall regression line fit to the entire data set that ignore the treatment levels or factors. It is demonstrated that the methods on covariate-adjusted residuals are only appropriate when the regression lines are parallel and covariate means are equal for all treatments. In this paper, we proposed the new nonparametric method on the ANCOVA model, as applying joint placement in a one-way layout on residuals as described in Chung and Kim (2007). A Monte Carlo simulation study is adapted to compare the power of the proposed procedure with those of the previous procedure.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.62 no.11
• /
• pp.1505-1510
• /
• 2013

This paper presents a method for determining the optimal placement of distributed generation units considering voltage sags. In general, the existing methods for distributed generation placement do not consider power quality problems such as voltage sags. In this paper, a novel method based on both genetic algorithm and voltage sag assessment is proposed for determining the placement of distributed generation unit. In the proposed method, the optimal placement is determined to minimize voltage sag effects and system losses.

• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.33A no.11
• /
• pp.128-139
• /
• 1996

In this paper, we propose an algorithm to solve the problem of placement of rectangular blocks whose sizes and shpaes are pre-determined. The proposed method solves the placement of many retangular blocks of different sizes and shapes in a hierarchical manner, so as to minimize the chip area. The placement problem is divided into several sub-problems: hierarchical partioning, hierarchical area/shape estimation, hierarchical pattern pacement, overlap removal, and module rotation. After the circuit is recursively partitioned to build a hierarchy tree, the necessary wiring area and module shpaes are estimated using the resutls of the partitioning and the pin information before the placement is performed. The placement templaes are defined to represent the relative positions of the modules. The area and the connectivity are optimized separately at each level of hierachy using the placement templates, so the minimization of chip area and wire length can be achieved in a short execution time. Experiments are made on the MCNC building block benchmark circuits and the results are compared with those of other published methods. The proposed technique is shown to produce good figures in tems of execution time and chip area.

• The Transactions of the Korea Information Processing Society
• /
• v.4 no.12
• /
• pp.2971-2984
• /
• 1997

In this paper, we propose an efficient video block Placement scheme that utilize the current disk product that has MZR disk characteristic and users' skewed access pattern on VOD. Also, we evaluate its performance through simulation and modeling of VOD server. The basic placement rule is to place on MZR disks by LP, SHP methods according to the Zipf distribution of popularity. To verify the proposed scheme, we examined its performance on workstation with 2 MZR disks under varied skewed factors. The proposed placement scheme showed better response time than the random method. To extend proposed placement scheme to disk group, we analyzed the theoretical maximum numbers of concurrent users and the required buffer size per user. For performance parameters for the proposed scheme, we considered the disk head scheduling methods, the placement methods and the striping unit. The result of experiments showed that the proposed scheme was effective.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.11 no.3
• /
• pp.213-221
• /
• 2009

This paper presents the concrete placement method of tunnel lining to improve the concrete lining quality such as cavities, cracks of the concrete lining. In order to perform this study, the occurred cracks initially in the concrete lining are reviewed and analyzed. From the review, the improvement methods to minimize the defects of concrete lining are suggested. To confirm the efficiency of new concrete placement approaches and the scale of tunnel section, two types of the scaled model tests are carried out and analyzed in model scales of 1/20 and 1/7. The 1/20 scaled model tests are carried out using the existing experimental rigs. The 1/7 scaled model tests are carried out in new test rigs developed in this study. The concrete placement rates obtained from the experimental results are analyzed and compared with themselves. In the existing concrete placement method, 1/20 scale model test than 1/7 scale model test have increased concrete placement rates but It is clearly found that two kinds of experimental studies show the similar results in improvement methods and good agreement with new concrete placing approach.

• Journal of the Korean Society of School Health
• /
• v.26 no.3
• /
• pp.133-143
• /
• 2013

Purpose: The purpose of this study is to provide basic data for a more reasonable health teacher placement policy sending teachers to more appropriate sites, by analyzing the change process of the health teacher placement standards and the problems caused by an unreasonable placement policy. Methods: This study mainly analyzed relevant research data and existing studies focusing on a literature analysis. Results: To date, the placement policy for health teachers has changed, going through expansion, reduction, and retrogression, since its establishment. The standard, placing health teachers only in elementary schools with more than 18 classes, was created in 1952. Despite the expansion of the role of health teachers and the revision of the school health law in 2007, this standard has been applied to date without modification. In the meantime, there have been many problems caused by inappropriate placement of health teachers. It was difficult for health teachers in large schools to carry out proper health education; and, in many schools, passive health management, such as first aid, health tests, and student health management, was mainly executed rather than active health management. Students in small schools were not even given an opportunity to receive health education and health management owing to the absence of health teachers. Also, compared to teachers teaching other subjects, health teachers have had very unfair placement standards. Conclusion: The placement policy for health teachers, which has been applied to the present, has never reflected social change, the increase of student health issues, and the demand from the school area. Although the role of health teachers expanded with the execution of health education, the current placement standards for health teachers are very unreasonable. Accordingly, it is necessary to review the health teacher placement policy in a reasonable manner and to revise the standards considering the reality.

• Imaging Science in Dentistry
• /
• v.41 no.2
• /
• pp.59-62
• /
• 2011

Purpose : This study was performed to evaluate the changes of jaw bone density around the dental implant after placement using computed tomography scan (CT-Scan). Materials and Methods : This retrospective study consisted of 30 patients who had lost 1 posterior tooth in maxilla or mandible and installed dental implant. The patients took CT-Scan before and after implant placement. Hounsfield Unit (HU) was measured around the implants and evaluated the difference of HU before and after implant installation. Results : The mean HU of jaw bone was 542.436 HU and 764.9 HU before and after implant placement, respectively (p<0.05). The means HUs for male were 632.3 HU and 932.2 HU and those for female 478.2 HU and 645.5 HU before and after implant placement, respectively (p<0.05). Also, the jaw bone with lower density needed longer period for implant procedure and the increased change of HU of jaw bone was less in the cases which needed longer period for osseointegration. Conclusion : CT-Scan could be used to assess the change of bone density around dental implants. Bone density around dental implant was increased after placement. The increased rate of bone density could be determined by the quality of jaw bone before implant placement.

• Journal of Periodontal and Implant Science
• /
• v.49 no.3
• /
• pp.185-192
• /
• 2019

Purpose: Implant wall thickness and the height of the implant-abutment interface are known as factors that affect the distribution of stress on the marginal bone around the implant. The goal of this study was to evaluate the long-term effects of supracrestal implant placement and implant wall thickness on maintenance of the marginal bone level. Methods: In this retrospective study, 101 patients with a single implant were divided into the following 4 groups according to the thickness of the implant wall and the initial implant placement level immediately after surgery: 0.75 mm wall thickness, epicrestal position; 0.95 mm wall thickness, epicrestal position; 0.75 mm wall thickness, supracrestal position; 0.95 mm wall thickness, supracrestal position. The marginal bone level change was assessed 1 day after implant placement, immediately after functional loading, and 1 to 5 years after prosthesis delivery. To compare the marginal bone level change, repeated-measures analysis of variance was used to evaluate the statistical significance of differences within groups and between groups over time. Pearson correlation coefficients were also calculated to analyze the correlation between implant placement level and bone loss. Results: Statistically significant differences in bone loss among the 4 groups (P<0.01) and within each group over time (P<0.01) were observed. There was no significant difference between the groups with a wall thickness of 0.75 mm and 0.95 mm. In a multiple comparison, the groups with a supracrestal placement level showed greater bone loss than the epicrestal placement groups. In addition, a significant correlation between implant placement level and marginal bone loss was observed. Conclusions: The degree of bone resorption was significantly higher for implants with a supracrestal placement compared to those with an epicrestal placement.